View MM336X_5348481.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

mitsumi 150ma ldo with auto power save MM336X 150ma ldo with auto power save monolithic ic MM336X outline this ic is a 150 ma ldo featuring automatic power-saving. this device automatically switches between a high-speed operation mode and low-power mode depending on the load current. in the low power mode, current consumption is lowered to 4.5 a. this device is suitable for cell-phones which require low power consumption in standby mode and other such applications. features 1. input voltage range 2~6v 2. output voltage range 1.5~5v 3. output voltage accuracy v out ?% 4. maximum output current 150ma 5. supply current 4.5a typ. (no-load) 0.01a typ. (off) 6. output capacitor 1f 7. dropout capacitor 0.14v typ. (v o =3v, i o =100ma) 8. short current 50ma typ. 9. line regulation 0.01%/v 10. load regulation 15mv typ. (i o =1~80ma) 11. ripple rejection 70db typ. (f=1khz) package sot-25a sson-4b applications 1. mobile phones 2. digital still cameras http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X pin assignment block diagram v dd ce gnd v out bias vref current limit 405 " 5017*&8 440/# 5017*&8 1 v dd 2 gnd 3 ce 4 nc 5 v out 1 ce 2 v dd 3 v out 4 gnd sot - 25a pin no. pin name functions 1 v dd voltage?supply pin 2 gnd gnd pin 3 ce on/off?control pin ce output low off high on connect ce pin with v dd pin, when it is not used. 4 nc no connection 5 v out output pin sson-4b pin no. pin name functions 1 ce on/off?control pin ce output low off high on connect ce pin with v dd pin, when it is not used. 2 v dd voltage?supply pin 3 v out output pin 4 gnd gnd pin pin description http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X note1 : with pc board of glass epoxy (60 40 1.6 t mm) note2 : with pc board of glass epoxy (110 40 0.8 t mm) absolute maximum ratings ( except where noted otherwise ta=25c) item symbol ratings units storage temperature t stg ?55~+150 c supply voltage v dd - 0.3~7.0 v ce input voltage v ce - 0.3~v dd +0.3 v output voltage v out - 0.3~v dd +0.3 v output current iomax 200 ma power dissipation pd 350(note1) sot-25a mw 330(note2) sson-4b recommended operating conditions ( except where noted otherwise ta=25c) item symbol ratings units operating ambient temperature t jop - 40~85 c operating voltage v op 2.0~6.0 v output current i o 0~150 ma note3 : the parameter is guaranteed by design. item symbol measurement conditions min. typ. max. units input current(off) i dd off v ce =0v 0.01 1.0 a no-load input current i dd i out =0ma 4.5 10 a gnd pin current ignd i out =5ma 12 a output voltage v out i out =30ma 0.99 1.01 v line regulation v line v dd =vo(typ.)+0.5~6v, i out =30ma (v out 1.6v, v dd =2.2~6v) 0.01 0.2 %/v load regulation v load 1ma i out 80ma 15 50 mv dropout voltage vio please refer to another page v ripple rejection 1 (note3) rr1 f=1khz, vripple=0.5v, i out =30ma 1.5v vout 4.0v 70 db ripple rejection 2 (note3) rr2 f=10khz, vripple=0.5v, i out =30ma 1.5v vout 4.0v 55 db ripple rejection 3 (note3) rr3 f=1khz, vripple=0.5v, i out =30ma v out 4.0v 45 db ripple rejection 4 (note3) rr4 f=10khz, vripple=0.5v, i out =30ma v out 4.0v 35 db v out temperature coef? cient (note3) v out / t i out =30ma - 40 t op 85c 100 ppm/c output short-circuit current ilim v out =0v 50 ma ce high threshold voltage v ceh 1.5 v ce low threshold voltage v cel 0.25 v ce high threshold current i ceh - 0.1 0.1 a ce low threshold current i cel - 0.1 0.1 a electrical characteristics 1 (except where noted otherwise v dd =v out (typ.)+1v, v ce =v dd , ta=25c) http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X electrical characteristics 2 (except where noted otherwise v dd =v out (typ.)+1v, v ce =v dd , ta=25c) model no. item output voltage dropout voltage 1 dropout voltage 2 v out (v) vio1 (v) vio2 (v) measurement conditions min. typ. max. measurement conditions min. typ. max. measurement conditions min. typ. max. mm3361f i out =30ma 1.485 1.500 1.515 i out =30ma 1.5v v out 1.9v 0.1 0.15 i out =100ma 1.5v v out 1.9v 0.6 0.8 mm3361g 1.584 1.600 1.616 mm3361h 1.683 1.700 1.717 mm3361j 1.782 1.800 1.818 mm3361k 1.881 1.900 1.919 mm3362a 1.980 2.000 2.020 2.0v v out 2.4v 0.08 0.12 2.0v v out 2.4v 0.24 0.31 mm3362b 2.079 2.100 2.121 mm3362c 2.178 2.200 2.222 mm3362d 2.277 2.300 2.323 mm3362e 2.376 2.400 2.424 mm3362f 2.475 2.500 2.525 2.5v v out 2.9v 0.06 0.08 2.5v v out 2.9v 0.16 0.23 mm3362g 2.574 2.600 2.626 mm3362h 2.673 2.700 2.727 mm3362j 2.772 2.800 2.828 mm3362y 2.822 2.850 2.879 mm3362k 2.871 2.900 2.929 mm3363a 2.970 3.000 3.030 3.0v v out 3.2v 0.05 0.07 3.0v v out 3.2v 0.14 0.21 mm3363b 3.069 3.100 3.131 mm3363c 3.168 3.200 3.232 mm3363d 3.267 3.300 3.333 3.3v v out 5.0v 0.04 0.06 3.3v v out 5.0v 0.13 0.19 mm3363e 3.366 3.400 3.434 mm3363f 3.465 3.500 3.535 mm3363g 3.564 3.600 3.636 mm3363h 3.663 3.700 3.737 mm3363j 3.762 3.800 3.838 mm3363k 3.861 3.900 3.939 mm3364a 3.960 4.000 4.040 mm3364b 4.059 4.100 4.141 mm3364c 4.158 4.200 4.242 mm3364d 4.257 4.300 4.343 mm3364e 4.356 4.400 4.444 mm3364f 4.455 4.500 4.545 mm3364g 4.554 4.600 4.646 mm3364h 4.653 4.700 4.747 mm3364j 4.752 4.800 4.848 mm3364k 4.851 4.900 4.949 mm3365a 4.950 5.000 5.050 http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X measuring circuit note 1. the output capacitor is required between output and gnd to prevent oscillation. 2. the esr of capacitor must be de? ned in esr stability area. it is possible to use a ceramic capacitor without esr resistance for output. the ceramic capacitor must be used more than 1f and b temperature characteristics. 3. the wire of v cc and gnd is required to print full ground plane for noise and stability. 4. the input capacitor must be connected a distance of less than 1cm from input pin. 5. in case the output voltage is above the input voltage, the overcurrent ? ow by internal parastic diode from output to input. (reference example of external parts) output capacitor ceramic capacitor 1f input capacitor ceramic capacitor 1f application circuit temperature characteristics : b v ce v dd v out c out c in gnd a a c out c in ce v dd v out gnd http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X characteristics (vo=1.5v) output - input voltage (except where noted otherwise v dd =v out (typ.) +1v, v ce =v dd , ta=25c) input current - input voltage load regulation gnd pin current dropout voltage - output current 56 1234 0 0.0 1.0 0.5 2.0 1.5 r l = r l =10 r l =50 output voltage (v) input voltage (v) 456 123 0 0 1 2 5 4 3 10 9 7 6 8 input voltage (v) input current (a) r l = 150 100 50 0 0 20 ?20 15 10 5 ?5 ?10 ?15 output current (ma) load regulation (mv) 5 34 2 1 0 20 40 0 35 30 25 15 10 5 output current(ma) gnd pin current ( a) highspeed mode hysteresis power save mode 100 20 40 60 80 0 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 v dd =1.3v dropout voltage (v) output current (ma) 56 34 2 20 10 5 15 0 ?5 ?10 ?15 ?20 r l =50 input voltage (v) line regulation (mv) line regulation http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X load transient response (io=5 100ma) $ jo 'z $ 0 ' 4ejw * 0 n"ejw 7 0 7ejw (/% 50?/div c in =1?,c o =1? i o : 50ma/div v o : 0.2v/div gnd load transient response (io=5 150ma) ripple rejection current limit i o =30ma i o =150ma i o =1ma ?100 ?90 10 1000 100 0.1 1 0.01 ?80 ?40 ?50 ?60 ?70 0 ?20 ?30 ?10 frequency (khz) ripple rejection rr (db) 300 50 100 150 200 250 0 2.0 1.5 1.0 0.5 0.0 output voltage (v) output current (ma) load transient response (io=0.1 100ma) i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd 50?/div c in =1?,c o =1? i o : 50ma/div v o : 0.2v/div gnd load transient response (io=0.1 150ma) http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X characteristics (vo=3.0v) (except where noted otherwise v dd =v out (typ.) +1v, v ce =v dd , ta=25c) output - input voltage input current - input voltage load regulation gnd pin current dropout voltage - output current 56 1234 0 0.0 2.0 1.0 4.0 3.0 r l = r l =20 r l =100 output voltage (v) input voltage (v) 456 123 0 0 2 4 10 8 6 20 18 14 12 16 input voltage (v) input current (a) r l = 150 100 50 0 0 20 ?20 15 10 5 ?5 ?10 ?15 output current (ma) load regulation (mv) 5 34 2 1 0 20 40 0 35 30 25 15 10 5 output current(ma) gnd pin current ( a) highspeed mode hysteresis power save mode 150 50 100 0 0.30 0.25 0.20 0.15 0.10 0.05 0.00 dropout voltage (v) output current (ma) 56 4 3 20 10 5 15 0 ?5 ?10 ?15 ?20 r l =100 input voltage (v) line regulation (mv) line regulation http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X load transient response (io=5 100ma) i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd load transient response (io=5 150ma) ripple rejection output voltage - temperature i o =30ma i o =150ma i o =1ma ?100 ?90 10 1000 100 0.1 1 0.01 ?80 ?40 ?50 ?60 ?70 0 ?20 ?30 ?10 frequency (khz) ripple rejection rr (db) 110 ?30 ?10 0 30 50 70 90 ?50 3.02 3.01 3.00 2.99 2.98 2.97 2.96 2.95 tempereture (oc) output voltage (v) load transient response (io=0.1 100ma) i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd load transient response (io=0.1 150ma) http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X current limit 300 50 100 150 200 250 0 5 4 3 2 1 0 output voltage (v) output current (ma) http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X characteristics (vo=5.0v) (except where noted otherwise v dd =v out (typ.) +1v, v ce =v dd , ta=25c) output - input voltage input current - input voltage load regulation gnd pin current dropout voltage - output current 56 1234 0 0 3 1 2 6 5 4 r l =166.6 r l =33.3 output voltage (v) input voltage (v) r l = 456 123 0 0 5 15 10 30 20 25 input voltage (v) input current (a) 150 100 50 0 10 0 30 ?30 20 ?10 ?20 output current (ma) load regulation (mv) v dd =6v 5 34 2 1 0 20 40 0 35 30 25 15 10 5 v dd =6v output current(ma) gnd pin current ( a) highspeed mode hysteresis power save mode 200 50 100 150 0 0.20 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.02 0.04 0.00 v dd =4.8v dropout voltage (v) output current (ma) 5.8 5.6 6 5.6 5.7 5.5 20 10 5 15 0 ?5 ?10 ?15 ?20 r l =166.6 input voltage (v) line regulation (mv) line regulation http://www..net/ datasheet pdf - http://www..net/
mitsumi 150ma ldo with auto power save MM336X load transient response (io=5 100ma) i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd load transient response (io=5 150ma) ripple rejection current limit i o =30ma i o =150ma i o =1ma ?100 ?90 10 1000 100 0.1 1 0.01 ?80 ?40 ?50 ?60 ?70 0 ?20 ?30 ?10 frequency (khz) ripple rejection rr (db) 300 50 100 150 200 250 0 6 5 4 3 2 1 0 v dd =6v output voltage (v) output current (ma) load transient response (io=0.1 100ma) i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd i o : 50ma/div v o : 0.2v/div 50?/div c in =1?,c o =1? gnd load transient response (io=0.1 150ma) http://www..net/ datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of MM336X

	To Download MM336X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .