data sheet the fc series setter is used for remote setting of a con- troller or variable constant setting of various types of com- puting elements. this instrument uses a solid state indicator and a pushbutton operation system to provide reliable monitoring and operating functions. 1. high reliability this instrument is designed with few mechanical parts. it is mainly composed of electronic parts such as a solid state indicator which was formerly consisted of mechani- cal parts. 2. international standards this instrument is compact in size, conforming to inter- national standards iec. it operates on 24v dc power to deliver 1 to 5v dc signals as recommended by iec standards. 100 and 200v ac power are also available for conven- ience of operation. 3. front panel operation process values and set points can be read accurately with digital indications on panel front. various parameter set- tings and setting operations are also possible from the front panel of the instrument. p rocess value n put (pv) square-root extraction linearize filter limiter h l pv sv l r fault alm kpv sv e xternal set point n put (cas or pi) 1 to 5v dc, p ulse width, o r pulse number) local mode output (ls) remote request (r-req) set point output signal (sv) high alarm output (h) low alarm output (l) flt output compensated process value signal (kpv) r emote a cknowledege s ignal (r-ack) pnf1 fc series setter (continuous output type) features functional diagram date EDS11-105E jul. 1, 1994
2 pnf1 contents of indication: process value (industrial value), set point (industrial value), high/low alarm, etc. indication contents are selectable by f/s , , keys on front panel. setting method: by using f/s , , , , st keys on front panel (4) setting functions fixed value setting method: by using of , pushbuttons on front panel. setting speed, approx. 40 sec/fs remote setting method: by use of external set point signal (voltage or pulse width input) tracking speed setting range; 0 to 900 sec/fs (5) operation mode changeover by using of r/l pushbutton on front panel r l changeover r l changeover 1. input signal (1) process value input signal: one input selectable from the following voltage in- put signal current in- put signal 1 to 5v dc 4 to 20ma dc allow. error 0.2%/fs* allow. error 0.2%/fs balanceless bumpless balance bumpless balanceless bumpless voltage signal* pulse width signal note: * balanceless bumpless by setting tracking speed i + i 0 i (6) alarm functions high/low alarm settable in industrial values for process value input signal. 4. power failure processing functions power failure detection: setting output held at power failure detec- tion. during power failure: data backed up by capacitor up to 5 minutes. initial value of set point stored in non-volatile memory (10 years expected at ambient temperature of 50 c or less). power failure recovery: initial or continuous start mode can be set within 5 minutes of power failure. recovery from power failure lasting longer than 5 minutes is initial. ** note: ** operation mode set at initial can be reg- istered l: local mode or r: remote mode 5. self-diagnosis functions input signal abnormality: flt lamp lights, flt output contact "on" indication of abnormal contents: cause of abnormality indicated in numeri- cal values on front panel. 6. transmission functions (1) transmission items supervisory items: pnf host process variable, set point, operation mode, alarm information, fault informa- tion, various limiter values, constants, etc. setting operation items: host pnf set point, operation mode, various limiter values, constants, etc. (2) transmission setting inhibit: parameter setting enable/inhibit can be designated by transmission from the host. designation is done by keys on the front panel key. input resistance, 1m ? or more 24v 2v dc can be supplied to transmit- ter only when ac power is used note: * fs: full scale (2) analog input signal: 1 point (3) digital input signal: 1 point r-ack contact input (photo-coupler insulation) on 0v, off 24v ( input current, approx. 11ma/24v dc) on 0v, off 24v (input current, approx. 11ma/24 dc) on 0v, off 24v (approx. 11ma/24v dc) max. input frequency 500hz pulse width input signal pulse number in- put signal pi + pi (4) pulse width or pulse number input signal: 1 set (either one) contact input (photo-coupler insulation) external set point input signal input resistance, 1m ? or more allow. error 0.2%/fs 1 to 5v dc cas remote acknowledge signal 2. output signal (1) analog output signal: 2 points compensated process value signal set point output signal 1 to 5v dc (2) digital output signal: 5 points fault output local mode output remote request signal high alarm output low alarm output flt ls r-req h l open-collector output (photo- coupler insula- tion) rated output, 30v x 0.1a dc, max. output resistance, 1 ? or less allow. error 0 2%/fs kpv sv (2) operation mode indication indicating method: led (green) green: l(local), r(remote) (3) numerical value indication, setting indication method: led (red), name in 3 digits + numerical value in 5 digits (negative code included) 3. indication, setting, operating functions (1) bargraph indication sv indicator led (green) 101 + 2 0 to 100%, linear 1%/fs 100mm indication method no. of segments range resolution scale length indicating mode pv indicator led (red) 101 + 2 0 to 100%, linear 1 %/fs 100mm 0 to 100% bargraph indication, 0 to 100% reverse bargraph indication, dot indication, ?0 to +50% deviation indication specifications
3 (3) communication interface (a) t-link: private interface transmission speed: 500kbps no. of units connectable: 32 max. transmission distance: 1km max. transmission form: multi-drop control method: i/o transmission and message (b) rs-422a/485: universal interface transmission speed: 2400, 4800, 9600 or 19200bps configurable no. of units connectable: 31 max. transmission distance: 1km max. transmission form: multi-drop control method: polling/selecting (c) cc data line: private interface transmission speed: 19.2kbps no. of units connectable: 15 max. transmission distance: 500m max. transmission form: multi-drop control method: polling/selecting 7. other functions data protective function by pass code 8. operating conditions power supply: select from 3 types 24v dc (20 to 30v dc) 100v ac (85 to 132v/47 to 63hz ac) 200v ac (187 to 264v/47 to 63hz ac) power consumption: approx. 11w (dc) approx. 20va (ac) dielectric strength: 1500v ac, 1 min. insulation resistance: 500v dc, 100m ? or more ambient temperature: 0 to 50 c ambient humidity: 90% rh or less enclosure: steel case rating plate (name plate): 100 (h) x 70 (w) mm, white acryl dimensions: 144 (h) x 72 (w) x 391 (d) mm, iec (din) standard mass (weight): approx. 2.9kg mounting method: flush indoor mounting; vertical mounting. mountable on tilted surface angle " " finish color: munsell n 1.5 for both front panel and case scope of delivery: setter and mounting bracket code symbols =0 to 90 12345678 0 9 10 pnf 1 a b a b 1 2 3 y t r s c 5 - description process value input signal 1 to 5v dc 4 to 20ma dc setting method l type r-l type power supply 24v dc (20 to 30v dc) 100v ac (85 to 132v/47 to 63hz ac) 200v ac (187 to 264v/47 to 63hz ac) transmission functions none t-link rs-422a rs-485 cc data line
4 pnf1 terminal cover terminal panel thickness 8mm or less 140 16 support bracket 200min. when mounting 1unit when mounting "n" units 355 36 mounting bracket 144 72 panel cutout 250min. (72.2n 4) +1 0 138 +1 0 no. of units n 2 200min. 138 +1 0 68 +0.7 0 outline diagram (unit:mm)
5 block terminals (m4 screw) connection for process value input terminals kpv sv sc h l pc* pcd g note: * symbols for ac instrument power are vpo, pco, approx. 24v dc (0.1a max.) output. 51 52 53 54 55 56 57 58 59 60 61 62 earth ao (compensated process value signal) ao (set point output signal) ai, ao common bus do (high alarm) do (low alarm) instrument power supply (24v dc, ac power) di, do 24v power supply 71 72 73 74 75 76 77 78 79 80 81 82 + + cas sc r-req r-ack vp* vpd ai (external set point) ai, ao common bus do (remote request) di (remote acknowledge) instrument power supply (24v dc, ac power) di, do 24v power supply ai process value input do (local mode) i+ (pv) do (flt output) (pulse width input or pulse number input) instrument power (ac) 11 i (sc) 12 13 14 ls 15 ac flt i o pi + pi ac 16 31 32 33 34 35 1 to 5v dc the 5th digit of code symbols a 4 to 20ma dc the 5th digit of code symbols b 4 to 20ma dc with inner dc power supply of cc-s the 5th digit of code symbols b 11 + 31 12 11 12 11 12 31 31 60 pc + + + + connection diagram
communication connector 6 7 8 9 1 2 3 4 5 sig gnd shld(sd) inh txd+(t1) txd (t2) rxd + green red yellow brown black white rxd 6 7 8 9 1 2 3 4 5 sig gnd shld(sd) inh txd+(t1) txd (t2) rxd + rxd 6 7 8 9 1 2 3 4 5 shld(sd) sig gnd inh txd+(t1) txd (t2) rxd + green red yellow brown black host master controller white rxd 6 7 8 9 1 2 3 4 5 shld(sd) sig gnd inh txd+(t1) txd (t2) rxd + line termination resistor rxd pnf1 pnf1 pnf1 pnf1 host communication cable termination resistor terminal station first station symbol in ( ): t-link terminal symbol note: pnf1 information in this catalog is subject to change without notice. printed in japan head office 6-17, sanbancho, chiyoda-ku, tokyo 102-0075, japan http://www.fesys.co.jp/eng sales div. international sales dept. no.1, fuji-machi, hino-city, tokyo, 191-8502 japan phone: 81-42-585-6201, 6202 fax: 81-42-585-6187 http: //www.fic-net.jp/eng caution on safety *before using this product, be sure to read its instruction manual in advance.
|
