do not scale from this print .134.003 3.410.08 .012 0.31 (see note 8) .309 7.85 .139 3.54 .104 ref 2.64 "a" "a" .145 3.68 ref .095 2.41 ref .9700 ref 24.638 1.0700 ref 27.178 .320 ref 8.13 .354 8.99 .035 ref 0.89 .9000 .0020 22.860 0.051 (19 pos - 1) x .0500[1.270] .250 6.35 .017.010 0.430.25 .308.020 7.820.51 c1 4 01 19 a b c d e f item no. part number quantity material 1 asp-103597-01-b 1.0000 ul 94 v0, color: black 2 c-226-03-h 114.00 phos bronze, 521 hard temper 3 sdb-030-6337 114.00 63% tin /37% lead 4 k-850-650 1.0000 polyimide film 5 ct-asp1132ms .00148 conductive polymer section "a"-"a" 1 2 3 see note 5 1.732 44.00 ref .630 16.00 ref user direction of un-reeling pocket not detailed 5 c packaging view any rev made to this print must have an updated mkt print sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 2 .xxx: .005 .xxxx: .0020 vita 42 (lead free) socket assembly by: ASP-103612-05 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. cooper 12/08/06 2 1 sheet scale: 3:1 f:\dwg\misc\mktg\ASP-103612-05-mkt.slddrw plating: contact area: .000030 gold over .000050 nickel remainder: .000003 flash gold over .000050 nickel revision e notes: 1. asp-103597-01-b body for non-standard 19 position. 2. represents a critical dimension. 3. burr allowance: .0005[.013] max. 4. minimum pushout force: .5 lb. 5. contact to be flush to .002[.05] recessed. 6. one reel minimum plating requirement (85,000 contacts per reel). 7. all dims to be symmetrical about the centerline within .001[.03]. 8. .0025[.064] max variation between solderballs. 9. refer to visual inspection board for solderball appearance checks. 10. the distance from the center of any solderball to the center of any adjacent inner peg shall be .025.005[.64.13]. 11. solder joints to be inspected per ipc specification 12.2.12 (ipc-a-610c). 12. parts to be packaged in tape & reel. for qty's less than 125 pcs, no trailer or leader will be supplied. 13. note deleted. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
.2500 6.350 .9000 22.860 'a' recommended board layout 01 19 .0100 0.254 trace .0200 0.508 pad .0100 0.254 via (plated) .0250 0.635 pad .0310 0.787 free of solder mask .0250 0.635 45 detail 'a' scale 12 : 1 .900 22.86 .050 1.27 (typ) .250 6.35 .050 1.27 (typ) .0250 0.635 (typ) 01 19 recommended stencil layout stencil to be .0060[0.152] thick a b c d e f note: outer rows may not need vias - this is left to the discretion of the board designer. a b c d e f sheet of vita 42 (lead free) socket assembly by: ASP-103612-05 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. b. cooper 12/08/06 2 2 sheet scale: 3:1 ASP-103612-05 f:\dwg\misc\mktg\ASP-103612-05-mkt.slddrw revision e 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
