features ? supports 1000baset ethernet transceiver (1gb/s) ? plug-and-play installation ? multimode and singlemode fiber optics are available ? small stand alone form factor ? external universal power supply ? available in single fiber version ? available in insert card version 800-867-8426 ? info@opticomm.com ? www.opticomm.com ? contact opticomm for custom requirements. optical wavelength fiber output receiver loss conn 865 1310 1550 type mode suffix type power sensitivity budget range* type ? led mm l0 50 /125 -10 dbm -17 dbm 7 db 0.5 km dsc ? 62.5/125 0.3 km ? laser mm l1 50 /125 -13 dbm -20 dbm 7 db 10 km dsc ? laser sm l3 09/125 -3 dbm -23 dbm 20 db 35 km dsc 1000 mbps fiber optic ethernet transceiver (1gb/s) the DS-109TR non-managed copper-to-fiber ethernet transceiver media converters make the transition from copper to fiber more affordable and easier than ever. designed as stand alone units that can be placed virtually anywhere, the new converters boast an exceptionally compact form factor and an external universal power supply. the DS-109TR modules come standard with a duplex autosensing 1000base-tx port, while the modules have a 1000base-tx port that supports auto-negotiation. the modules can be manually configured to accommodate either half duplex or full duplex transmissions and, with the available port selection, links can be established using either crossover or straight through cabling. a variety of multimode and singlemode 1000baset-fiber ports are available, including dsc, lc and mtrj connectors. single fiber solutions are also available with sc-apc connectors. installation is quick and easy with no configuration required. simply plug in the power, connect the data lines and the network is up and running. the DS-109TR is ideally suited for fiber to the home (ftth) applications where they can be used as cpe connecting the subscriber to the service providers central office. the modules can be used anywhere that optical ethernet service is deployed. * chromatic dispersion and additional losses should be taken into account DS-109TR 1000baset ethernet transceiver opticomm reserves the right to change specifications without notice
9 9 fiber optic cable (up to 2.85km @850nm mm) made in the usa data (ethernet/serial/usb) data data rate 1000 mbps per channel connector type rj-45 utp interface ethernet ieee 802.3 foirl bit error rate 10e -9 general dimensions & weight stand alone: 3.5? l x 2.3? w x 1.0? h 9 oz operating temperature -0 c to +50 c storage temperature -30 c to +85 c humidity 0 to 95% non-condensing operating voltage 5 v dc (2a) vibration up to 5 g's shock up to 12 g's diagnostics status monitoring led indicator accessories rj-45 interface cables rj-45 to db sample configuratio n optiva ? configurable communication platform network management sdi & hd-sdi composite video, audio & data rgb/vga/dvi audio/fsk/intercom data (ethernet/serial/usb) catv/rf & l-band optical switching, routing & redundancy passive multiplexing solutions enclosures, racks & frames power supplies & accessories
|
