pb rohs compliance rohs compliance TSS0340U 0.03amp surface mount schottky barrier diode 0603 features ? designed for mounting on small surface ? extremely thin/leadless package ? low capacitance ? low forward voltage drop ? high temperature soldering: 260 o c/10 seconds at terminals ? chip version in 0603 mechanical data ? case: 0603 standard package, molded plastic ? terminals: gold plated, solderable per mil-std-750, method 2026. ? polarity: indicated by cathode band ? mounting position: any ? package code: rz ? weight: 0.003 gram (approximately) item 0603 l 0.071(1.80) 0.063(1.60) w 0.039(1.00) 0.031(0.80) t 0.033(0.85) 0.027(0.70) c 0.018(0.45) typical d 0.028(0.70) typical dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, re sistive or inductive load. for capacitive load, derate current by 20% type number symbol 0603 units repetitive peak reverse voltage v rrm 45 v dc reverse voltage v r 40 v average forward current i o 30 ma peak forward surge current 8.3ms single half sine-wave superimposed on rate load (jedec method) i fsm 500 ma power dissipation pd 150 mw forward voltage @ if=1.0ma v f 0.37 v reverse leakage current vr=30v vr=40v i r 0.5 1.0 ua ua typical capacitance between terminals vr=1v, f =1.0mhz reverse voltage c j 1.5 pf junction temperature t j -40 to + 125 o c storage temperature t stg -40 to + 125 o c version: a07
case temperature. ( c) o fig.3- maximum non-repetitive forward surge current peak forward surge current. (ma) 1 2 5 10 20 50 625 500 375 250 125 0 number of cycles at 60hz 8.3ms single half sine wave jedec method fig.4- typical junction capacitance capacitance.(pf) 0.1 1.0 10 100 1.5 0 4.5 reverse voltage. (v) fig.2- typical reverse characteristics instantaneous reverse current .( a) 0 20 40 60 80 100 120 140 0.01 100 10 1.0 0.1 0.01 0.1 1 10 100 percent of rated peak reverse voltage. (%) tj=75 c 0 tj=125 c 0 tj=25 c 0 version: a07 ratings and characteristic curves (TSS0340U ) fig.5- forward characteristics curve i , instantaneous forward current (ma) f v , instantaneous forward voltage (v) f 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 125 0 fig.1- curve maximum forward current derating average forward current. (%) 125 100 75 50 25 0 25 50 75 100 3.0 125 c 0 75 c 0 -25 c 0 25 c 0
|
