NDF9196 1saw filter 15 90 mhz features ? low-loss rf filter for mobile systems ? low amplitude ripple ? no matching network required for operation at 50 ? ? ceramic package for s urface m ounted t echnology ( smt ) ? lead-free production and rohs compliant package dimensions ceramic package: dcc6c pin configuration 2 input 5 output 1, 3, 4, 6 ground marking top view, laser marking " nd ?: manufacturer?s mark ? f ?: saw filter ? 9196 ?: part number ? ?: terminal 1 ? ?: lot number (the code shown below varies in a 4-year cycle) code 1 2 3 4 5 6 7 8 9 10 11 12 2009 a b c d e f g h j k l m 2010 n p q r s t u v w x y z 2011 a b c d e f g h i j k m 2012 n p q r s t u v w x y z maximum ratings rating value unit input power level p 10 dbm dc voltage v dc 5 v operating temperature range t a -40 ~ +85 c storage temperature range t stg -40 ~ +85 c http://www.luguang.cn email:lge@luguang.cn
electrical characteristics item minimum typical maximum unit center frequency f c 1591 mhz insertion loss il 1570.00 ?. 1612.00 mhz -- 1.5 2.5 db group delay ripple 1570.00 ?. 1612.00 mhz 10 40 ns absolute attenuation dc ?. 1500.00 mhz 22 25 db 1536 mhz 30 db 1646 mhz 30 db 1700.00 ?. 1800.00 mhz 25 29 db 1800.00 ?. 3000.00 mhz 22 28 db amplitude ripple (p-p) 1570.00 ?. 1612.00 mhz ? 0.5 1.0 db intput vswr 1570.00 ?. 1612.00 mhz 1.8 1 2.0 1 output vswr 1570.00 ?. 1612.00 mhz z 1.8 1 2.0 1 input / output impedance (nominal) 50 ? rohs compliant electrostatic sensitive device typical frequency response http://www.luguang.cn email:lge@luguang.cn n d f 9 1 9 6 1saw filter 15 90 mhz
http://www.luguang.cn email:lge@luguang.cn n d f 9 1 9 6 1saw filter 15 90 mhz
stability characteristics test item condition of test 1 mechanical shock (a) drops: 3 times on concrete floor (b) height: 1.0 m 2 vibration resistance (a) frequency of vibration: 10~55hz (b) amplitude: 1.5 mm (c) directions: x,y and z (d) duration: 2 hours 3 moisture resistance (a) condition: 40c, 90~95% r.h. (b) duration: 96 hours (c) wait 4 hours before measurement 4 climatic sequence (a) 70c for 16 hours (b) +55c for 24 hours, 90~95% r.h. (c) -25c for 2 hours (d) +40c for 24 hours, 90~95% r.h. (e) wait 4 hours before measurement 5 high temperature exposure (a) temperature: 70c (b) duration: 250 hours (c) wait 4 hours before measurement 6 thermal impact (a) +70c for 30 minutes ? -25c for 30 minutes repeated 3 times (b) wait 4 hours before measurement requirements: the saw filer shall remain within the electrical specifications after tests. remarks z saw devices should not be used in any type of fluid such as water, oil, organic solvent, etc. z be certain not to apply voltage exceeding the rated voltage of components. z do not operate outside the recommended operating temperature range of components. z sudden change of temperature shall be avoided, deterioration of the characteristics can occur. z be careful of soldering temperature and duration of components when soldering. z do not place soldering iron on the body of components. z be careful not to subject the terminals or leads of components to excessive force. z saw devices are electrostatic sensitive. please avoid static voltage during operation and storage. z ultrasonic cleaning shall be avoided. ultrasonic vibration may cause destruction of components. test circuit recommended land pattern http://www.luguang.cn email:lge@luguang.cn n d f 9 1 9 6 1saw filter 1 5 90 mhz
packing information carrier tape reel dimensions outer packing type quantity dimension description weight carton box 10000 19019095 0.85 carton box ? 20000 190190190 anti-static plastic bag & carton box 1 reel / bag 5 bags / box (10000 pcs) 10 bags / box (20000 pcs) 1.80 unit: mm unit: kg http://www.luguang.cn email:lge@luguang.cn NDF9196 1saw filter 1 5 90 mhz
recommended soldering profile http://www.luguang.cn email:lge@luguang.cn NDF9196 1saw filter 1 5 90 mh z
|
