1243 dimensions are shown for reference purposes only. dimensions are in inches over (millimeters) unless otherwise specified. specifications and availability subject to change. www.tycoelectronics.com technical support: refer to inside back cover. agastat catalog 1308242 issued 3-03 vtmr1 series on-delay timing module with internal potentiometer, relay output on-delay timing mode 8a spdt relay output. internal potentiometer for timing adjustment. reliable solid state timing circuitry. excellent transient protection. flame retardant, solvent resistant housing. file e60363 file lr33434 timing mode on-delay. timing specifications timing ranges: 15 to 300 sec. timing adjustment: internal potentiometer. accuracy: repeat accuracy: 5% max. (0.25% typ.) overall accuracy: max. time: ?%, +10%. min. time: ?0%, +10%. reset time: 250 ms, max. output contact data arrangement: 1 form c (spdt). rating: 8a, resistive, at nominal operating voltage. expected mechanical life: 10,000,000 operations. expected electrical life: 100,000 operations. outline dimensions and wiring diagram mechanical data mounting: panel mount with one #8 screw. termination: 0.250 in (6.35) quick connect terminals. weight: 4 oz. (112g) approximately. environmental data temperature range: storage: -40 c to +70 c. operating: -40 c to +70 c. users should thoroughly review the technical data before selecting a product part number. it is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. ordering information authorized distributors are likely to stock the following: none at present. initial dielectric strength between terminals and mounting: 3,000vac rms. between input and output: 1,500vac rms. input data @ 25 c voltage: 10% 120vac/vdc. power requirement: 3.5va, max. transient protection: non-repetitive transients of the following magni- tudes will not cause spurious operation of affect function and accuracy. operating voltage <0.1 ms <1 ms 120 vac/vdc 2,580v 2,150v* * min. source impedance of 100 ohms. current drain: 30ma, max. part number time range input voltage VTMR1AEA 15 to 300 sec. 120vac 2.00 (50.8) .250 (6.35) x .032 (.813) quick connects .170 dia (4.32) accepts #8 screw 1.25 (31.8) .885 (22.5) time delay adjust 2.00 (50.8) .286 (7.26) .278 (7.06) input voltage output relay output relay .763 (19.4)
|