bl1-005 thru bl1-10 page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http: //www.frontierusa.com 1a bridge rectifiers bl1-005 thru bl1-10 features z plastic material used carries underwriters laboratory flammability classification 94v-0 z typical ir less than 1 a z ideal for printed circuit board z high temperature soldering guaranteed: 260c/10 s (9.5mm) lead length / 5lbs, (2.3kg) tension z surge overload rating: 30a peak mechanical data z case: void free plastic package, dimensions in millimeters (1mm = 0.0394?) z terminals: axial leads, solderable per mil-std-202 method 208 z mounting position: any z weight: 3.6 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or induc tive load. for capacitive load, derate current by 20% ratings symbol bl1-005 bl1-01 bl1-02 BL1-04 bl1-06 bl1-08 bl1-10 units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current .375 (9.5mm) lead length at ta=55 c i o 1.0 a peak forward surge current, 8.3ms single half sine-wave superimposed on rated load i fsm 30 a storage temperature range t stg - 55 to + 150 c operating temperature range t op - 55 to+ 125 c electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol bl1-005 bl1-01 bl1-02 BL1-04 bl1-06 bl1-08 bl1-10 units maximum forward voltage at i o per leg v f 1.0 v maximum reverse current at 25 c i r 10 a 0.03 (0.8?) 0.100 (2.60) 85 ac 16 s 0.5 9.9 min 10
bl1-005 thru bl1-10 page: 2 ratings and characteristic curves bl1-005 thru bl1-10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 instantaneous forward voltage, volts 20 10 1.0 0.1 .01 instantaneous forward current amperes fig. 4 - derating curve for output rectified current t j =25 1 10 20 number of cycles at 60h z 60 30 0 peak forward surge current amperes fig. 2 - maximum non-repetitive peak forward surge current t l =90 o c 8.3ms single half sine-wave (jedec method) average forward output current amperes fig. 1 - derating curve for output rectified current 1.0 .8 .6 .4 .2 0 0 20 40 60 80 100 120 140 ambient temperature ( ) sing phase wave 60hz inductive or resistive load instantaneous reverse current, microamperes fig. 3 - typical forward characteristics 10 1.0 0.1 .01 t of rated peak reverse volt a t j = 25
|