? coilcraft, inc. 2009 specifications subject to change without notice. please check our website for latest information. gate drive transformer document 519 document 519 revised 09/01/09 1. when ordering, please specify packaging code: DA2099-AL d packaging: d =13 machine ready reel. eia-481 embossed plastic tape (500 per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter d instead. 2. inductance measured at 100 khz, 0.3 vrms, 0 adc 3. leakage inductance measured at 100 khz, 0.3 vrms with secondary pins shorted. 4. based on bsat of the core at 25c and number of turns of the primary. 5. capacitance measured at 100 khz, 0.3 vrms. 6. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering. primary leakage primary secondary volt-time capacitance part turns inductance 2 inductance 3 dcr max dcr max product 4 pri to sec 5 number 1 ratio 20 % (mh) max (h) (ohms) (ohms) (v-sec) max (pf) DA2099-AL_ 1 : 1 3.79 13.0 2.30 2.85 221 13.0 for on semiconductor ncp1652 and ncp4302 6 pri sec 1 10 5 10 6 5 1 1 5 DA2099-AL ccixxxx recommended land pattern 0.453 11,50 0.512 13,00 0.256 6,50 0.394 10,00 0.063 1,60 0.079 2,00 0.063 1,60 0.028 0,70 0.079 2,00 max dot indicates pin 1 max max 0.004 / 0,10 10 6 dimensions are in inches mm core material ferrite terminations rohs compliant tin-silver over tin over nickel over phos bronze. other terminations available at additional cost. weight 1.35 g ambient temperature ?40c to +125c storage temperature component: ?40c to +125c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 500/13 reel; plastic tape: 24 mm wide, 0.36 mm thick, 20 mm pocket spacing, 6.13 mm pocket depth pcb washing only pure water or alcohol recommended ? designed for on semiconductor for use with the ncp1652 pfc controller and the ncp4302 flyback controller. ? requires only 1.5 cm 2 of board space ? 1500 vrms primary to secondary isolation ? can be used from 20 khz to 250 khz.
|
