View PS2514L-1-F3_4391386.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r08ds0012ej0100 rev.1.00 page 1 of 14 mar 19, 2012 the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. preliminary data sheet ps2514-1,ps2514l-1 high-speed switching/high isolat ion voltage phot ocoupler series description the ps2514-1 and ps2514l-1 are optically coupled isolator s containing a gaas light emitting diode and an npn silicon phototransistor, enabling relatively high switching speed with high load resistor of several k . the ps2514-1 is in a plastic dip (d ual i n-line p ackage) and the ps2514l-1 is lead bending type (gull-wing) for surface mount. features ? high isolation voltage (bv = 5 000 vr.m.s.) ? high collector to emitter voltage (v ceo = 40 v) ? guaranteed maximum switching speed (t off 25 s @ i f = 5 ma, v cc = 5 v, r l = 5 k ) ? high-speed switching (t on = 15 s typ. @ i f = 5 ma, v cc = 5 v, r l = 5 k ) (t off = 15 s typ. @ i f = 5 ma, v cc = 5 v, r l = 5 k ) ? embossed tape product: PS2514L-1-F3: 2 000 pcs/reel ? pb-free product ? safety standards ? ul approved: no. e72422 ? csa approved: no. ca 101391 (ca5a, can/csa-c22.2 60065, 60950) ? cqc approved: cqc11001056759/cqc11001056758 cqc11001056865/cqc11001057073 ? din en60747-5-2 (vde0884 part2) approved: no. 40008862 (option) applications ? power supply ? fa equipment ? electronic electricity meter r08ds0012ej0100 rev.1.00 mar 19, 2012 1. anode 2. cathode 3. emitter 4. collector pin connection (top view) 12 43
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 2 of 14 mar 19, 2012 package dimensions (unit: mm) dip type ps2514-1 3.50.3 4.150.4 3.20.4 2.54 1.250.15 0.500.10 0.25 m 4.60.35 6.5 0 to 15 7.62 0.25 +0.1 ?0.05 1 2 4 3 +0.7 ?0.5 lead bending type ps2514l-1 0.25 m 4.60.35 3.50.3 2.54 1.250.15 0.90.25 9.600.4 0.25 +0.1 ?0.05 0.1 +0.1 ?0.05 1 2 4 3 0.15 6.5 +0.7 ?0.5 photocoupler construction parameter unit (min.) air distance 7 mm outer creepage distance 7 mm inner creepage distance 4 mm isolation thickness 0.3 mm
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 3 of 14 mar 19, 2012 marking example r 2514 nr131 week assembled year assembled (last 1 digit) in-house code ctr rank code remark "ps" and "-1" are omitted from original type number. no. 1 pin mark n 1 31 r package made in japan made in taiwan r new pkg pb-free and halogen free y company initial type number assembly lot
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 4 of 14 mar 19, 2012 ordering information part number order number solder plating specification etc. packing style safety standard approval application part number *1 ps2514-1 ps2514-1y-a pb-free and magazine case 100 pcs ps2514-1 ps2514l-1 ps2514l-1y-a halogen free PS2514L-1-F3 ps2514l-1y-f3-a em bossed tape 2 000 pcs/reel standard products (ul, csa, cqc approved) ps2514l-1 ps2514-1-v ps2514-1y-v-a magazine case 100 pcs din en60747-5-2 ps2514-1 ps2514l-1-v ps2514l-1y-v-a (vde0884 part2) ps2514l-1-v-f3 ps2514l-1y-v-f3-a embossed tape 2 000 pcs/reel approved (option) ps2514l-1 *1 for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode reverse voltage v r 6 v forward current (dc) i f 30 ma power dissipation derating p d / c 1.5 mw/ c power dissipation p d 150 mw peak forward current *1 i fp 0.5 a transistor collector to emitter voltage v ceo 40 v emitter to collector voltage v eco 0.6 v collector current i c 20 ma power dissipation derating p c / c 1.5 mw/ c power dissipation p c 150 mw isolation voltage *2 bv 5 000 vr.m.s. operating ambient temperature t a ? 55 to +100 c storage temperature t stg ? 55 to +150 c *1 pw = 100 s, duty cycle = 1% *2 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-2 shorted together, 3-4 shorted together. recommended operating conditions parameter symbol min. typ. max. unit input current i f 5 6 7 ma
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 5 of 14 mar 19, 2012 electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 5 ma 1.1 1.3 v reverse current i r v r = 5 v 5 a terminal capacitance c t v = 0 v, f = 1.0 mhz 10 pf transistor collector to emitter dark current i ceo v ce = 40 v, i f = 0 ma 100 na coupled current transfer ratio ctr i f = 5 ma, v ce = 5 v 50 125 200 % collector saturation voltage v ce (sat) i f = 5 ma, i c = 1 ma 0.35 v isolation resistance r i-o v i-o = 1.0 kv dc 10 11 isolation capacitance c i-o v = 0 v, f = 1.0 mhz 0.5 pf turn-on time *1 t on v cc = 5 v, i f = 5 ma, r l = 5 k 15 25 s turn-off time *1 t off 15 25 *1 test circuit for switching time pw = 100 s duty cycle = 1/10 pulse input v cc v out r l = 5 k 50 i f input output 90% 10% t r t d t f t s t on t off
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 6 of 14 mar 19, 2012 typical characteristics (t a = 25 c, unless otherwise specified) diode power dissipation p d (mw) transistor power dissipation p c (mw) ambient temperature t a ( c) collector to emitter dark current i ceo (na) ambient temperature t a ( c) ambient temperature t a ( c) diode power dissipation vs. ambient temperature transistor power dissipation vs. ambient temperature collector to emitter dark current vs. ambient temperature 150 100 125 75 25 50 0 25 0 50 75 100 125 150 1.5 mw/ c 150 25 50 75 100 125 150 100 100 10 1 0.1 0.01 75 50 25 0 ? 25 ? 50 v ce = 10 v 1.5 mw/ c 20 v 40 v collector current i c (ma) collector to emitter voltage v ce (v) 16 6 8 12 14 0 2 0 46 8 10 2 4 10 collector saturation voltage v ce (sat) (v) collector current vs. collector saturation voltage collector current i c (ma) 0.1 10 1 100 0 0.2 0.4 0.6 0.8 1 100 125 75 25 50 0 0 collector current vs. collector to emitter voltage 3 ma 3 ma 5 ma 5 ma 10 ma 10 ma i f = 2 ma i f = 2 ma forward current i f (ma) forward voltage v f (v) forward current vs. forward voltage 100 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 50 10 5 1 0.5 0.1 0 c ?25 c ?55 c +60 c +25 c t a = +100 c remark the graphs indicate nominal characteristics.
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 7 of 14 mar 19, 2012 normalized to 1.0 at t a = 25 c, i f = 5 ma, v ce = 5 v ambient temperature t a ( c) normalized current transfer ratio ctr 0.2 0.0 0.4 0.6 0.8 1.0 1.2 ? 50 ? 25 0 25 50 75 100 ambient temperature t a ( c) switching time t ( s) 1 10 100 load resistance r l ( ) switching time t ( s) 0.1 1 10 100 100 10 000 1 000 100 000 i f = 5 ma, v cc = 5 v, r l = 5 k ctr = 100% i f = 5 ma, v cc = 5 v, ctr = 100% forward current i f (ma) current transfer ratio ctr (%) 0 50 150 100 200 250 1 10 100 v ce = 5 v sample a normalized current transfer ratio vs. ambient temperature b c current transfer ratio vs. forward current ? 50 ? 25 0 25 50 75 100 t off t on switching time vs. load resistance ambient temperature t a ( c) turn-on time t on ( s) 1 10 100 i f = 5 ma, v cc = 5 v, r l = 5 k ? 50 ? 25 0 25 50 75 100 turn-on time vs. ambient temperature switching time vs. load resistance ctr = 70% 170% 100% ambient temperature t a ( c) turn-off time t off ( s) 1 10 100 i f = 5 ma, v cc = 5 v, r l = 5 k ? 50 ? 25 0 25 50 75 100 turn-off time vs. ambient temperature ctr = 70% 170% 100% t f t r t d t s remark the graphs indicate nominal characteristics.
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 8 of 14 mar 19, 2012 v cc = 5 v, i f = 5 ma, ctr = 170% frequency f (khz) normalized gain g v (db) frequency response 300 5 0 ? 5 ? 10 ? 15 ? 20 ? 25 0.1 1 10 1 000 100 10 000 r l = 100 remark the graphs indicate nominal characteristics.
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 9 of 14 mar 19, 2012 taping specifications (unit: mm) tape direction outline and dimensions (tape) outline and dimensions (reel) packing: 2 000 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 PS2514L-1-F3 1.550.1 2.00.1 4.00.1 1.750.1 4.5 max. 4.0 0.1 0.4 5.30.1 8.00.1 7.50.1 16.00.3 10.30.1 1.5 +0.1 ?0 3302.0 1001.0 2.00.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 10 of 14 mar 19, 2012 recommended mount pad dimensions (unit: mm) d c b a part number ps2514l lead bending a lead bending type (gull-wing) for surface mount 9.2 b 2.54 c 1.7 d 2.2
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 11 of 14 mar 19, 2012 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 12030 s (preheating) 220 c 180 c package surface temperature t ( c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260 c max. 120 c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead. (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 12 of 14 mar 19, 2012 2. cautions regarding noise be aware that when voltage is applied suddenly between t he photocoupler?s input and output or between corrector- emitters at startup, the out put transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. measurement conditions of current transfer ratios (ctr), which differ according to photocoupler check the setting values before use, since the forward cu rrent conditions at ctr measurement differ according to product. when using products other than at the s pecified forward current, the characteristics curves may differ from the standard curves due to ctr value variations or the like. therefore, check the charac teristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high temperature and high humidity.
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 13 of 14 mar 19, 2012 specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068-1/din en 60068-1) 55/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, pr ocedure a for type test and random test) u pr = 1.5 u iorm , p d < 5 pc u iorm u pr 890 1 335 v peak v peak test voltage (partial discharge te st, procedure b for all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 1 669 v peak highest permissible overvoltage u tr 8 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (iec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664-1 vde0110 part 1) iii a storage temperature range t stg ?55 to +150 c operating temperature range t a ?55 to +100 c isolation resistance, minimum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum permiss ible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 175 400 700 10 9 c ma mw
ps2514-1,ps2514l-1 e r08ds0012ej0100 rev.1.00 page 14 of 14 mar 19, 2012 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, tran sport and dispose of materials that contain arsenic and ot her such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth.
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history ps2514-1, ps2514l-1 data sheet description rev. date page summary 0.01 may 28, 2010 ? first edition issued 1.00 mar 19, 2012 throughout prelimi nary data sheet -> data sheet throughout safety standards approved p.1 addition of pb-free product p.3 modification of marking example p.4 modification of ordering information pp.6 to 8 addition of typical characteristics p.10 modification of recommended mount pad dimensions pp.11 to 12 addition of notes on handling p.13 addition of specification of vde marks license document
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is s ubject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control l aws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology described in this document for any purpose rela ting to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporate d into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 7. renesas electronics products are classified according to the following three quality grades: "standard", "high quality", an d "specific". the recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. you must check the quality grade of each renesas electronics produ ct before using it in a particular application. you may not use any renesas electronics product for any application categorized as "specific" without the prior written consent of renesas electronics. fu rther, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for an application categorized as "specific" or for which the product is not intended wh ere you have failed to obtain the prior written consent of renesas electronics. the quality grade of each renesas electronics product is "standard" unless otherwise expressly specified in a renesas electroni cs data sheets or data books, etc. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment ; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "specific": aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or syst ems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct thr eat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas el ectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design . please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compati bility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. renesas electronics america inc. 2880 scott boulevard santa clara, ca 95050-2554, u.s.a. tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-585-100, fax: +44-1628-585-900 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 204, 205, azia center, no.1233 lujiazui ring rd., pudong district, shanghai 200120, china tel: +86-21-5877-1818, fax: +86-21-6887-7858 / -7898 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 1 harbourfront avenue, #06-10, keppel bay tower, singapore 098632 tel: +65-6213-0200, fax: +65-6278-8001 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co., ltd. 11f., samik lavied' or bldg., 720-2 yeoksam-dong, kangnam-ku, seoul 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2012 renesas electronics corporation. all rights reserved. colophon 1.1

▲Up To Search▲

Price & Availability of PS2514L-1-F3

	To Download PS2514L-1-F3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .