cat.8100y pb series miniature sized, high ripple current high reliability high ripple current load life of 5000 / 7000 hours at +105?. suited for ballast application. compliant to the rohs directive (2002/95/ec). aluminum electrolytic capacitors u 1 p 2 b 3 2 4 c 5 2 6 2 7 0 8 m 9 p 10 d 11 configuration capacitance tolerance ( 20%) rated capacitance (22 f) rated voltage (160v) series name type d p d 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 p 0.5 15 min 4 min d + max d pressure relief vent ( 6.3up) radial lead type type numbering system (example : 160v 22 f) 12 size code 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 22 10.0 1.0 25 12.5 1.0 ( d 2 2 ) 2 . 0 ( d 1 8 ) 1 . 5 l + max sleeve ( p. e . t. ) d 5 pb-free leadwire pb-free pet sleeve dd 6.3 ed 8 10 pd 12.5 to 18 hd 22 25 rd configuration (mm) dimension table in next page. please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. specifications category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tangent of loss angle (tan ) stability at low temperature endurance shelf life marking performance characteristics item 40 to +105 c (10 to 50v), 25 to +105 c (160 to 450v) 10 to 450v 0.47 to 3300f 20% at 120hz, 20 c rated voltage (v) 10 to 50v 160 to 450v after 2 minutes' application of rated voltage, leakage current is not more than 0.01cv or 3 (a) , whichever is greater. after 2 minutes' application of rated voltage, leakage current is not more than 0.06cv+10 (a) . printed with white color letter on dark brown sleeve. after storing the capacitors under no load at 105 ? c for 1000 hours and then performing voltage treatment based on jis c 5101-4 clause 4.1 at 20 c, they shall meet the specified values for the endurance characteristics listed above. measurement frequency : 120hz capacitance change leakage current the specifications listed at right shall be met when the capacitors are restored to 20 c after d.c. bias plus rated ripple current is applied for 5000 hours (7000 hours for d=10 and 12.5 (10 to 50v)) at 105 c , the peak voltage shall not exceed the rated voltage. tan within 30% of the initial capacitance value (10 to 50v) within 20% of the initial capacitance value (160 to 450v) less than or equal to the initial specified value 300% or less than the initial specified value (10 to 50v) 200% or less than the initial specified value (160 to 450v) z 25 c / z+20 c rated voltage (v) impedance ratio zt / z20 (max.) 10 3 16 2 25 2 35 2 50 2 160 3 200 3 250 3 350 4 400 6 450 6 measurement frequency : 120hz, temperature : 20 c rated voltage (v) tan (max.) 10 0.30 16 0.25 25 0.22 50 0.15 160 0.15 200 0.15 250 0.15 350 0.20 400 0.24 450 0.24 35 0.18 pb ca long life pt smaller please refer to page 20 about the end seal configulation.
cat.8100y 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 r47 010 2r2 3r3 4r7 100 220 330 470 101 221 331 471 102 222 332 cap.(f) v 1a 10 1c 16 1e 25 1v 35 1h 50 code dimensions 5 c 120hz pb series aluminum electrolytic capacitors frequency coefficient of rated ripple current v 0.47 to 10 0 0.75 00 22 to 470 0 1000 to 3300 0 10 to 820 50hz 0.85 0.95 0.60 1.00 120hz 1.00 1.00 1.00 1.20 300hz 1.10 1.03 1.20 1.40 1khz 1.20 1.05 1.60 1.55 1.65 10k to 50khz 100khz 1.25 1.30 1.10 1.15 1.80 2.00 10 to 50 160 to 450 cap.(f) frequency 12.5 c 120hz : rated ripple current (marms) at 105 c 100khz : in this case, 6 will be put at 12th digit of type numbering system. 250 500 250 500 300 600 375 750 550 1100 650 1300 850 1700 950 1900 1050 2100 1150 2300 1350 2700 1500 3000 100 220 330 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 10 22 33 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 10
|
