1 terminal relay g6d-f4b/G3DZ-F4B easy-to-use, space-saving terminal relay with four-point output almost the same size as pyf socket: 31 x 35 x 68 mm (w x h x d) each terminal circuit (with coil or contact) is independent from one another. short bar ensures easy connection of common and adjacent terminals. provided with a terminal cover that prevents electric-shock accidents. relay and mos fet relay models are available. led operation indicator. built-in diode absorbs coil surge. mounts either on din track or screws. tool for easy mounting or removal of relays provided. ordering information model number legend: g6d/g3dz- 12 1. terminal form f: flat type 2. number of relays mounted 4b: 4 output contact configuration terminals rated coil voltage model relay output spst-no 4 phillips head screw til 12 vdc g6d-f4b eayou u ss o s ead sc e terminal 24 vdc g6 power mos fet relay tt 12 vdc G3DZ-F4B o e os e ay output 24 vdc g3 note: when ordering add the rated coil voltage to the model number . example: g6d-f4b 24 vdc rated coil voltage accessories (order separately) replacement relays applicable t erminal relay rated voltage model g6d-f4b 12 vdc g6d-1a (see note) g6 24 vdc g6 (see o e) 12 vdc g6d-1a-ap (see note) 24 vdc g6 (see o e) G3DZ-F4B 12 vdc g3dz-2r6pl g3 24 vdc g3 6 note: error rate (p level) for the g6d-1a is 5 v at 10 ma and that for the g6d-1a-ap is 5 v at 1 ma. short bar applicable t erminal relay model g6d-f4b g6d-4-sb g 6 d - f 4 b g 6 d -4- sb G3DZ-F4B g 3 dz - f 4 b
g6d-f4b/G3DZ-F4B g6d-f4b/G3DZ-F4B 2 specifications ratings coil ratings (per g6d relay) rated voltage rated current coil resistance must operate voltage must release voltage max. voltage power consumption 12 vdc 18.7 ma 720 w 70% max. (t1) 10% min. 130% approx. 200 mw 24 vdc 10.5 ma 2,880 w 0% a (see note 1) 0% 30% o00 note: 1. the must operate voltage is 75% or less of the rated voltage if the relay is mounted upside down. 2. rated current and coil resistance were measured at a coil temperature of 23 c with a tolerance of 10%. 3. operating characteristics were measured at a coil temperature of 23 c. 4. the maximum allowable voltage is the maximum value of the allowable voltage range for the relay coil operating power supply. there is no continuous allowance. 5. the rated current includes the terminal' s led current. contact ratings (per g6d relay) item resistive load (cos f = 1) rated load 3 a at 250 v ac, 3 a at 30 vdc rated carry current 5 a max. switching voltage 250 v ac, 30 vdc max. switching current 5 a max. permissible capacity (reference value) 1,250 v a, 150 w error rate (reference value) (see note) 5 vdc, 1 ma note: this value is for a switching frequency of 120 times per minute. power mos fet relay specifications input (per g3dz power mos fet relay) rated voltage operating voltage must operate voltage level must release voltage level input impedance rated current 12 vdc 9.6 to 14.4 vdc 9.6 vdc max. 1 vdc min. 2 k w 20 % 8.0 ma 20% 24 vdc 19.2 to 28.8 vdc 19.2 vdc max. c 4 k w 20 % 8.2 ma 20% note: the rated current includes the terminal' s led current. output (per g3dz power mos fet relay) load voltage load current inrush current 3 to 264 v ac 3 to 125 vdc 100 m to 0.3 a 6 a (10 ms)
g6d-f4b/G3DZ-F4B g6d-f4b/G3DZ-F4B 3 characteristics item g6d-f4b e relay output contact resistance (see note 2) 100 m w max. must operate time (see note 3) 10 ms max. release time (see note 3) 10 ms max. insulation resistance 1,000 m w min. (at 500 vdc) dielectric strength 2,000 v ac, 50/60 hz for 1 min between coil and contacts. eec cs e g 750 v ac, 50/60 hz for 1 min between contacts of same polarity impulse withstand voltage (between coil and contacts) 4,000 v (1.2 50 m s) v ibration resistance destruction: 10 to 55 hz, 1.5-mm double amplitude malfunction: 10 to 55 hz, 1.5-mm double amplitude shock resistance destruction: 500 m/s 2 soc essace malfunction: 100 m/s 2 life expectancy mechanical: 20,000,000 operations min. (at 18,000 operations/hr) e e pec a cy electrical: 100,000 operations min. (3 a at 250 v ac, resistive load) 100,000 operations min. (3 a at 30 vdc, resistive load) (at 1,800 operations /hr) ambient temperature operating: 25 c to 55 c (with no icing) storage: 25 c to 55 c (with no icing) ambient humidity operating: 45% to 85% weight approx. 65 g note: 1. the above values are initial values. 2. measurement condition: 1 a at 5 vdc 3. ambient temperature condition: 23 c item G3DZ-F4B e power mos fet relay output must operate time 10 ms max. release time 15 ms max. output on-resistance 2.4 w max. leakage current at off state 10 m a max. (at 125 vdc) insulation resistance 100 m w min. (at 500 vdc) dielectric strength 2,000 v ac, 50/60 hz for 1 min between input and output terminals v ibration resistance 10 to 55 hz, 1.5-mm double amplitude shock resistance 500 m/s 2 ambient temperature operating: 25 c to 55 c (with no icing) storage: 25 c to 55 c (with no icing) ambient humidity operating: 45% to 85% weight approx. 65 g
g6d-f4b/G3DZ-F4B g6d-f4b/G3DZ-F4B 4 engineering data g6d-f4b max. switching capacity life expectancy switching current (a) life expectance (x10 operations) switching voltage (v) switching current (a) dc resistive load ac resistive load 250 vac/30 vdc resistive load 4 G3DZ-F4B load current vs. ambient temperature characteristics inrush current resistivity non-repetitive (keep the inrush current to half the rated value if it occurs repetitively.) load current (a) inrush current (a. peak) ambient temperature ( c) energizing time (ms)
g6d-f4b/G3DZ-F4B g6d-f4b/G3DZ-F4B 5 dimensions note: all units are in millimeters unless otherwise indicated. g6d-f4b G3DZ-F4B 16, m3 phillips head screws mounting dimensions two, 4 dia. or m3.5 holes terminal arrangement/ internal connections (t op v iew) input side note: make sure that the polarity of the coil is correct. 68 max. 31 max. 35 max. output side accessories g6d-4-sb short bar applicable model model g6d-f4b g6d-4-sb G3DZ-F4B g6 s
g6d-f4b/G3DZ-F4B g6d-f4b/G3DZ-F4B 6 precautions wiring be sure to turn off the power when wiring the unit and do not touch the charged terminals of the unit. otherwise, an electric shock may result. do not apply overvoltage to the input terminals. otherwise, the unit may malfunction or burn. relay models do not connect the unit to loads exceeding the rated switching ca - pacity (switching voltage or current). otherwise, faulty insulation, contact weld, or faulty contact of relays, or damage to relays may result, or the relays may malfunction or burn. the life of relays varies with the switching condition. test the relays under the actual operating conditions before using the relays within the permissible switching frequency . the use of dete - riorated relays may result in the faulty insulation of the relays or cause the relays to burn. do not use the unit in locations with inflammable gas. otherwise, a fire or explosion due to the heat of the relays or sparks from the relays may result when they are switched. ssr output (power mos fet relay model) do not connect the unit to loads consuming a total current exceed - ing the rated output current of the unit. otherwise, the output ele- ment of the unit may be damaged and a short or open-circuit mal - function may result. if the unit is connected to a dc inductive load, connect a diode to the unit to protect the unit from counter-electromotive voltage, other- wise the counter-electromotive voltage may damage the output ele - ment and a short or open-circuit malfunction may result. correct use mounting when mounting two or more units, reduce the current and on duty and provide an appropriate distance between the units so that the ambient temperature will not exceed 55 c. relay replacement use the relay removal tool provided with the unit to dismount a relay. be sure to turn off the power to the unit before replacing a relay . when mounting a relay , insert the relay vertically so that the relay terminals will come in contact with the socket contact pins properly . do not mount relays that are dif ferent to one another in voltage. wiring pay utmost attention not to make mistakes with the polarity of the input terminals. coil v oltage make sure not to impose voltage exceeding the permissible voltage on the coil continuously . do not connect any inductive load in parallel to the coil input as shown in the following example or power supply with a surge volt - age. otherwise, the surge absorption diode will be damaged. do not use the following circuit inductive load g6d coil coil surge absorption diode handling do not drop, shock, or vibrate the unit excessively . otherwise, dam - age to the unit may result or the unit may malfunction. make sure that all the relays are properly mounted before use. screw tightening torque tighten each terminal screw to a torque of 0.78 to 1.18n m. t ighten each mounting screw to a torque of 0.59 to 0.98 n m. installation environment do not install the unit in the following locations. otherwise, damage to the unit may result or the unit may malfunction. locations with direct sunlight. locations with an ambient temperature range not within 25 c to 55 c. locations with rapid temperature changes resulting in condensa- tion or locations with relative humidity ranges not within 45% to 85%. locations with corrosive or inflammable gas. locations with excessive dust, salinity , or metal powder . locations with vibration or shock af fecting the unit. locations with water , oil, or chemical sprayed on the unit. disassembly, repair, and modification do not disassemble, repair , or modify the unit. otherwise, an elec - tric shock may result or the unit may malfunction.
g6d-f4b/G3DZ-F4B g6d-f4b/G3DZ-F4B 7
g6d-f4b/G3DZ-F4B g6d-f4b/G3DZ-F4B 8 omron corporation industrial automation company industrial control components division 28th fl., crystal t ower bldg., 1-2-27, shiromi, chuo-ku, osaka 540-6028 japan phone: (81)6-6949-6025 fax: (81)6-6949-6029 all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.03937. t o convert grams into ounces, multiply by 0.03527. cat. no. j115-e1-1 in the interest of product improvement, specifications are subject to change without notice. printed in japan 0799-1m (0799) a
|
