CPH5522 no. a0326-1/5 applications relay drivers, lamp drivers, motor drivers, flash, mosfet gate drive. features composite type with a pnp transistor and an npn transistor contained in one package, facilitating high-density mounting. the CPH5522 consists of two chips encapsulated in a package which are equivalent to the cph3114 and the cph3214, respectively. ultrasmall package facilitate miniaturization in end products (0.9mm mounting height). ( ) : pnp specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo (- -)15 v collector-to-emitter voltage v ceo (- -)15 v emitter-to-base voltage v ebo (- -)5 v collector current i c (- -)2 a collector current (pulse) i cp (- -)5 a base current i b (- -)300 ma collector dissipation p c mounted on a ceramic board (600mm 2 ? 0.8mm) 1unit 0.9 w t otal dissipation p t mounted on a ceramic board (600mm 2 ? 0.8mm) 1.2 w junction temperature tj 150 c storage temperature tstg - -55 to +150 c marking : ey ordering number : ena0326 22807ea ti im tc-00000536 sanyo semiconductors d ata sheet CPH5522 tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. pnp / npn epitaxial planar silicon transistors high-current switching applications
CPH5522 no. a0326-2/5 electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)12v, i e =0a (--)0.1 a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)0.1 a dc current gain h fe v ce =(--)2v, i c =(--)100ma 200 560 gain-bandwideth product f t v ce =(--)2v, i c =(--)300ma (350)450 mhz output capacitance cob v cb =(--)10v, f=1mhz (17)9 pf i c =(--)750ma, i b =(--)15ma (- -100) (--160) mv collector-to-emitter saturation voltage v ce (sat) 120 190 mv i c =(--)1.5a, i b =(--)30ma (- -180) (--290) mv 215 340 mv base-to-emitter saturation voltage v be (sat) i c =(--)750ma, i b =(--)15ma (--)0.85 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 a, i e =0a (--)15 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (- -)15 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 a, i c =0a (--)5 v t urn-on time t on see specified test circuit. (50)40 ns storage time t stg see specified test circuit. (90)180 ns fall time t f see specified test circuit. (15)20 ns package dimensions electlical connection unit : mm (typ) 7017a-009 switching time test circuit 1 : collector (npn tr) 2 : collector (pnp tr) 3 : base (pnp tr) 4 : emitter common 5 : base (npn tr) sanyo : cph5 2 1 4 53 2.9 0.05 0.4 2.8 1.6 0.2 0.6 0.6 0.9 0.2 0.15 0.95 + + 50 ? input output v r r b r l v cc =5v 220 f 470 f v be = --5v pw=20 s i b1 i b2 dc 1% 20i b1 = --20i b2 =i c =750ma (for pnp, the polarity is reversed.) 54 3 12 1 : collector (npn tr) 2 : collector (pnp tr) 3 : base (pnp tr) 4 : emitter common 5 : base (npn tr) t op view
CPH5522 no. a0326-3/5 23 57 23 2 57 0.01 1.0 0.1 3 10 1000 5 7 100 3 2 5 7 3 2 collector current, i c -- a h fe -- i c dc current gain, h fe collector current, i c -- a f t -- i c gain-bandwidth product, f t -- mhz 23 57 23 2 57 - -0.01 --1.0 - -0.1 3 10 1000 5 7 100 3 2 5 7 3 2 collector current, i c -- a h fe -- i c dc current gain, h fe collector current, i c -- a f t -- i c gain-bandwidth product, f t -- mhz v ce = --2v v ce =2v it01697 it01698 base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a [pnp] [npn] [pnp] [npn] base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a [pnp] [npn] - -0.2 - -0.4 - -0.6 - -0.8 - -1.0 - -1.2 - -1.4 - -1.6 - -1.8 - -2.0 0 0- -0.2 - -0.1 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2.0 1.0 0 0 1.8 1.6 1.4 1.2 0.8 0.6 0.4 0.2 it11442 it11443 [pnp] [npn] - -50m a - -10ma - -20ma - -2ma - -4ma - -6ma - -8ma i b =0ma 50ma 30ma 20ma 10ma 8ma 6ma 4ma 2ma i b =0ma - -30ma - -40ma 40ma 7 5 3 2 23 57 - -0.01 --1.0 - -0.1 23 57 23 100 1000 10 7 5 3 2 7 5 3 2 100 1000 10 7 5 3 2 v ce = --2v - -25 c t a=75 c 23 57 0.01 1.0 0.1 23 57 23 v ce =2v - -25 c 25 c t a=75 c it11469 it11470 25 c - -2.0 - -1.0 - -1.8 - -1.6 - -1.4 - -1.2 - -0.8 - -0.6 - -0.4 - -0.2 0 2.0 1.0 1.8 1.6 1.4 1.2 0.8 0.6 0.4 0.2 0 0- -0.1 --0.3 --0.5 --0.7 --0.9 - -0.2 --0.4 --0.6 --0.8 --1.0 v ce = --2v - -25 c 25 c t a=75 c 0 0.2 0.4 0.6 0.8 0.1 0.3 0.5 0.7 1.0 0.9 - -25 c v ce =2v t a=75 c 25 c it11467 it11468
CPH5522 no. a0326-4/5 collector current, i c -- a v ce (sat) -- i c collector current, i c -- a v be (sat) -- i c collector current, i c -- a v ce (sat) -- i c collector current, i c -- a v be (sat) -- i c collector current, i c -- a v ce (sat) -- i c collector current, i c -- a v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v [pnp] [npn] 1.0 100 5 7 10 3 2 5 7 3 2 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 23 57 - -1.0 --10 23 23 57 1.0 10 23 1.0 100 5 7 10 3 2 5 7 3 2 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf f=1mhz it01699 it01700 f=1mhz [pnp] [npn] 23 57 - -0.01 --1.0 - -0.1 23 57 23 5 3 2 - -0.1 7 5 3 2 - -0.01 23 57 0.01 1.0 0.1 23 57 23 5 3 2 0.1 7 5 3 2 0.01 i c / i b =50 - -25 c ta=75 c i c / i b =50 -- 2 5 c 25 c t a=75 c it11407 it11408 25 c 23 57 0.01 1.0 0.1 23 57 23 5 3 2 0.1 7 5 3 2 0.01 7 23 57 - -0.01 --1.0 - -0.1 23 57 23 7 5 3 2 - -0.01 7 3 2 - -0.1 5 i c / i b =20 - -25 c t a=75 c it11405 it11406 i c / i b =20 - -25 c t a=75 c 25 c [pnp] [npn] [pnp] [npn] 25 c 10 1.0 0.1 - -10 - -1.0 - -0.1 7 5 3 2 23 57 0.01 1.0 0.1 23 57 23 7 5 3 2 i c / i b =50 t a= --25 c 25 c 75 c 7 5 3 2 23 57 - -0.01 --1.0 - -0.1 23 57 23 7 5 3 2 i c / i b =50 t a= --25 c 75 c it11471 it11472 25 c
CPH5522 no. a0326-5/5 ps it11409 0.1 1.0 23 23 57 2 10 357 0.1 0.01 2 3 5 7 2 10 2 3 5 7 1.0 3 5 7 100ms dc operation 10ms i cp =5a i c =2a 100 s 500 s [pnp / npn] 1ms a s o collector-to-emitter voltage, v ce -- v collector current, i c -- a p c -- ta ambient temperature, ta -- c collector dissipation, p c -- w [pnp / npn] it11410 0 020406 080 100 120 140 160 0.6 1.2 0.4 0.2 0.9 0.8 1.0 1.4 t otal dissipation 1unit t a=25 c single pulse for pnp minus sign is omitted mounted on a ceramic board (600mm 2 ? 0.8mm) mounted on a ceramic board (600mm 2 ? 0.8mm) sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. this catalog provides information as of february, 2007. specifications and information herein are subject to change without notice.
|
