8 80368 1280 mhz baw filter data sheet: rev a 12 /2011 - 1 of 6 - disclaimer: subject to change without notice e ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ? applications ? l - band ? for high - selectivity applications product features functional block diagram ? usable bandwidth 19 mhz ? low loss ? high selectivity ? single - ended operation ? ceramic chip - scale package (csp) ? small size ? hermetic rohs compliant, p b - free pin configuration pin # se - balanced description i/o input/output gnd ground ordering info rmation part no. description 8 8036 8 packaged part 880368 eval board evaluation board overall width, length, an d thickness are the only critical dimensions. all other dimensions are for reference only. dimensions shown are nominal in millimeters all tolerances are ? 0.13mm except overall length and width ? 0.25mm body: sapphire package: alumina terminations: au plating 0.5 - 2.5 ? m, over a 2.0 C 6.0 ? m ni plating i/o i/o gnd 0.84 nom. 0.89 max. 3.71 2.57 0.51 0.51 0.98 0.58 0.50 0.45 0.075 typ. 0.075 typ. www.datasheet.net/ datasheet pdf - http://www..co.kr/
8 80368 1280 mhz baw filter data sheet: rev a 12 /2011 - 2 of 6 - disclaimer: subject to change without notice e ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ? specifications electrical specifica tions (1) specified temperature range: (2 ) - 40 to + 85 oc parameter (3) conditions min typical (4) max units center frequency - 1280 - mhz maximum insertion loss @ 1280 mhz - 4.0 4.5 db 3db bandwidth reference loss at 1280 mhz 19 23 - mhz 40db lower frequency edge 12 49 1260 - mhz 40db upper frequency edge - 1300 1311 mhz vswr @ 1280 mhz - 1. 5 2.0 - source impedance (single - ended) ( 5 ) - 50 - ? ? load impedance (single - ended) ( 5 ) - 50 - ? ? notes: 1. all specifications are based on the triquint schematic for the main reference design shown on page 3 2. in production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tol erances 4. typical values are based on average measurements at room temperature 5. this is the opt imum impedance in order to achieve the performance shown www.datasheet.net/ datasheet pdf - http://www..co.kr/
8 80368 1280 mhz baw filter data sheet: rev a 12 /2011 - 3 of 6 - disclaimer: subject to change without notice e ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ? reference design schematic 50 ? single - ended input 50 ? single - ended input pc board mounting configuration refer to pcb layout for more information. notes: 1. all di mensions are in millimeters. 2. this footprint represents a recommendation only. i/o 50 50 ? ? i/o gnd 3.76 2.62 1.18 0.31 0.70 0.25 0.71 0.78 www.datasheet.net/ datasheet pdf - http://www..co.kr/
8 80368 1280 mhz baw filter data sheet: rev a 12 /2011 - 4 of 6 - disclaimer: subject to change without notice e ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ? typical performance (at room temperature) 1240.000 1260.000 1280.000 1300.000 1320.000 -70.0 -60.0 -50.0 -40.0 -30.0 -20.0 -10.0 0.0 frequency (mhz) d b s21 amplitude response 1260.000 1270.000 1280.000 1290.000 1300.000 -10.0 -5.0 0.0 frequency (mhz) d b s21 amplitude response 1275.000 1280.000 1285.000 0.0200 0.0400 0.0600 0.0800 frequency (mhz) s e c s21 group delay response 1260.000 1270.000 1280.000 1290.000 1300.000 1.0 1.5 2.0 2.5 3.0 frequency (mhz) l i n e a r m a g s11 vswr s11 smith chart www.datasheet.net/ datasheet pdf - http://www..co.kr/
8 80368 1280 mhz baw filter data sheet: rev a 12 /2011 - 5 of 6 - disclaimer: subject to change without notice e ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ? mechanical information marking the date code consists of: yy = last digit of year, ww = 2 di git week tape and reel information tape and reel available upon request eia - 481 tinning available per j - std - 001 absolute maximum ratings parameter rating operating temperature - 40 to + 85 o c storage temperature - 55 to +100 o c maximum input power +23 dbm operation of this device outside the parameter ranges given above may cause permanent damage. 880368 tfr logo date code yyww 880098 part no. www.datasheet.net/ datasheet pdf - http://www..co.kr/
8 80368 1280 mhz baw filter data sheet: rev a 12 /2011 - 6 of 6 - disclaimer: subject to change without notice e ? 2011 triquint semiconductor, inc. connecting the digital world to the global network ? product compliance information esd information value: passes ? 8 000 v min. test: human body model (hbm) standard: jedec standard jesd22 - a114 value: passes ? 16 00 v min. test: machine model ( mm ) standard: jedec standard jesd22 - a115 refer to esd sensitivity fo r data solderability compatible with th e latest version of j - std - 020, l ead free solder, 26 0 c refer to soldering profile fo r recommended guidelines. this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? halogen free (chlorine, bromine) ? antimony free ? tbbp - a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free contact information for the latest specifications, additional product information, worldwide sales and distribution locations, and information ab out triquint: web: www.triquint.com tel: +1. 407 . 886 . 8860 email: info - sales@tqs.com fax: +1. 407 . 886 . 7061 for technical questions and application information: email: info - defense@tqs.com important notice the information contained herein is believed to be reliable . triquint makes no warranties regarding the information contain herein . triquint assumes no responsibility or liability whatsoever for any of the information contained her ein. triquint assumes no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk assoc iated with such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual pro perty rights, whether with regard to such information itself or anything described by such info rmation. triquint products are not warranted or authorized for use as critical components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or deat h. www.datasheet.net/ datasheet pdf - http://www..co.kr/
|
