View SKY13364-389LF_3886761.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201270c ? skyworks proprietary information ? products and pr oduct information are subject to change without notice ? sep tember 16, 2010 1 data sheet SKY13364-389LF: 0.4-2.2 ghz gaas sp10t switch applications ? 2g/3g multimode cellular handsets (umts, cdma2000, edge, gsm) ? embedded data cards features ? broadband frequency range: 0.4 to 2.2 ghz ? four cmos/ttl control voltages (0/1.35 to 3.1 v) ? single, positive dc power supply (2.5 to 3.3 v) ? integrated, low-pass harmonic filter for gsm transmit paths ? integrated cmos decoder ? small qfn (26-pin, 3.0 x 3.8 mm) package (msl1, 260 ? c per jedec j-std-020) description the SKY13364-389LF is a gaas phemt single pole, ten-throw (sp10t) antenna switch with an integrated cmos decoder and dual low-pass harmonic filters. the switch has four wcdma transmit/receive ports, four gsm receive ports, and two gsm transmit ports that make the device ideal for cellular handset and data card applications. using advance switching technologies, the SKY13364-389LF maintains low insertion loss and high isolation for both transmit and receive switching paths. the switch exhibits an excellent 2 nd /3 rd order modulation distortion performance. decoder trx1 trx2 trx3 trx4 gs m_rx1 gs m_rx2 gs m_rx3 gs m_rx4 gs m_tx_hb gs m_tx_lb vdd v4 v3 v2 v1 ant s1903a figure 1. SKY13364-389LF block diagram switching is controlled by four cmos/ttl-compatible control voltage inputs (v1, v2, v3, and v4). depending on the logic voltage level applied to the control pins, the antenna pin is connected to one of ten switched rf ports using a low insertion loss path, while the paths between the antenna pin and the other rf pins are in a high isolation state. no external dc blocking capacitors are required on the rf paths the SKY13364-389LF is manufactured in a compact, 3.0 x 3.8 mm, 26-pin quad flat no-lead (qfn) package. a functional block diagram is shown in figure 1. the pin configuration and package are shown in figure 2. signal pin assignments and functional pin descriptions are provided in table 1.
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 2 september 16, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without no tice ? 201270c 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 6 17 18 1 9 20 21 22 23 24 25 2 6 g nd trx2 g nd trx3 trx4/ g nd g nd ant g nd g nd trx1 gs m_rx1 gs m_rx2 gs m_rx3 gs m_rx4 g nd g nd g nd gs m_tx_hb g nd g nd gs m_tx_lb v1 v2 v3 v4 vdd s1951 figure 2. SKY13364-389LF pinout C 26-pin qfn (top view) table 1. SKY13364-389LF signal descriptions pin # n a me description pin # n a me description 1 gnd ground 14 gnd ground 2 trx2 rf input/output port 2 15 gnd ground 3 gnd ground 16 gsm_rx4 gsm rf output port 4 4 trx3 rf input/output port 3 17 gsm_rx3 gsm rf output port 3 5 trx4/gnd rf input/output port 4 for 10-throw switch; connect to ground for 9-throw switch. 18 gsm_rx2 gsm rf output port 2 6 gnd ground 19 gsm_rx1 gsm rf output port 1 7 ant antenna rf port 20 trx1 rf input/output port 1 8 gnd ground 21 gnd ground 9 gnd ground 22 vdd dc power supply 10 gsm_tx_hb gsm high band transmit rf input port with integrated harmonic filter 23 v4 dc input control voltage 4 11 gnd ground 24 v3 dc input control voltage 3 12 gnd ground 25 v2 dc input control voltage 2 13 gsm_tx_lb gsm low band transmit rf input port with integrated harmonic filter 26 v1 dc input control voltage 1 note : bottom ground paddles must be connected to ground.
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201270c ? skyworks proprietary information ? products and pr oduct information are subject to change without notice ? sep tember 16, 2010 3 table 2. SKY13364-389LF absolute maximum ratings p a r a meter symbol minimum typic a l m a ximum units rf input power p in +36 dbm power supply 5 v control voltage v ctl 3.3 v storage temperature t stg C40 +125 ? c operating temperature t op C30 +90 ? c note: exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. exceeding any of the limits listed here may result in permanent damage to the d evice. caution : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this devi ce must be protected at all times from esd. static charges may eas ily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions should be used at all times. functional description the time from when v dd is applied to when the switch is active is the startup time. once the startup time has passed, the control voltages can be applied. rf power should not be applied during the startup time or damage to the device could result. the recommended startup sequence is: step 1: apply v dd . step 2: apply v1 to v4 voltages. step 3: apply the rf input. recommended startup time is 25 s. the device must be turned off in the reverse order. electrical and mechanical specifications the absolute maximum ratings of the SKY13364-389LF are provided in table 2. electrical specifications are provided in table 3. typical performance characteristics are illustrated in figures 3 to 14. the state of the SKY13364-389LF is determined by the logic provided in table 4. figure 15 illustrates the test setup used to measure data for figure 12. this industry standardized test is used to simulate the wcdma band 1 linearity of the antenna switch. a +20 dbm continuous wave (cw) signal, p fund , is sequentially applied to the trx1 through trx4 ports, while a C15 dbm cw blocker signal, p blk , is applied to the ant port. the resulting 3 rd order intermodulation distortion (imd3), f rx , is measured over all phases of p fund the SKY13364-389LF exhibits exceptional performance for all trx ports.
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 4 september 16, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without no tice ? 201270c table 3. SKY13364-389LF electrical specifications (note 1) (1 of 2) (v dd = 2.65 v, v1 = v2 = v3 = v4 = 0/1.8 v, t op = +25 ? c, p in = 0 dbm, characteristic impedance [z o ] = 50 , unless otherwise noted) p a r a meter symbol test condition min typic a l m a x units rf specifications insertion loss (trx1) il ant to trx1 824 to 960 mhz 1710 to 2170 mhz 0.50 0.70 0.60 0.80 db db insertion loss (trx2, trx3, trx4) il ant to trx2, trx3, trx4 824 to 960 mhz 1710 to 2170 mhz 0.60 0.75 0.70 0.85 db db insertion loss (gsm transmit low band) ant to gsm_tx_lb, 824 to 915 mhz 1.0 1.2 db insertion loss (gsm transmit high band) ant to gsm_tx_hb, 1710 to 1910 mhz 1.1 1.3 db insertion loss (gsm_rx1, gsm_rx2, gsm_rx3, gsm_rx4) ant to rx ports 869 to 960 mhz 1805 to 1990 mhz 0.8 1.0 1.0 1.2 db db isolation iso 0.4 to 2.2 ghz, trx1 to trx2, trx3, and trx4 ports 824 to 915 mhz, gsm_tx_lb to trx/gsm receive ports 1710 to 1910 mhz, gsm_tx_hb to trx/gsm receive ports 824 to 1910 mhz, trx2/trx3 to trx3/trx4 ports 30 35 32 20 db db db db harmonics umts, p in = +27 dbm gsm_tx_lb port, p in = +35 dbm gsm_tx_hb port, p in = +32 dbm C45 C45 C36 C36 C36 dbm dbm dbm gsm transmit attenuation (low band) gsm850 egsm900 attn 2f 3f 4f 2f 3f 4f 22 25 17 25 25 17 25 28 20 28 28 20 db db db db db db gsm transmit attenuation (high band): dcs1800 pcs1900 attn 2f 3f 2f 3f 22 25 25 25 25 28 28 28 db db db db return loss |s 11 | 0.4 to 2.2 ghz 14 18 db 2 nd order input intercept point iip2 aws, pcs, imt to cdma2000 modes +95.5 dbm 3 rd order intermodulation distortion imd3 umts mode C105 C97 dbm
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201270c ? skyworks proprietary information ? products and pr oduct information are subject to change without notice ? sep tember 16, 2010 5 table 3. SKY13364-389LF electrical specifications (note 1) (2 of 2) (v dd = 2.65 v, v1 = v2 = v3 = v4 = 0/1.8 v, t op = +25 ? c, p in = 0 dbm, characteristic impedance [z o ] = 50 , unless otherwise noted) p a r a meter symbol test condition min typic a l m a x units rf specifications (continued) gsm transmit low band 1 db input compression point ip1db 824 to 915 mhz +40 dbm gsm transmit high band 1 db input compression point ip1db 1710 to 1910 mhz +39 dbm switching speed 10/90% rf 3 5 s dc specifications supply voltage v dd 2.50 2.65 3.30 v supply current i dd 0.3 0.5 ma control voltage: high low v1, v2, v3, v4 1.35 0 1.80 3.10 0.3 v v control current: high low 1 1 10 10 a a note 1: performance is guaranteed only under the conditions listed in this table. typical performance characteristics (v dd = 2.65 v, v1 = v2 = v3 = v4 = 0/1.8 v, t op = +25 ? c, p in = 0 dbm, characteristic impedance [z o ] = 50 , unless otherwise noted) 0 C0.2 C0.4 C0. 6 C0.8 C1.0 C1.2 C1.4 C1. 6 C1.8 C2.0 0.8 1.0 1.2 1.4 1. 6 1.8 2.0 2.2 frequency ( g hz) in s ertion lo ss (db) trx1 trx2 trx3 trx4 figure 3. insertion loss vs frequency (ant to trx ports) 0 C0.2 C0.4 C0. 6 C0.8 C1.0 C1.2 C1.4 C1. 6 C1.8 C2.0 0.8 1.0 1.2 1.4 1. 6 1.8 2.0 2.2 frequency ( g hz) in s ertion lo ss (db) gs m_rx1 gs m_rx2 gs m_rx3 gs m_rx4 figure 4. insertion loss vs frequency (ant to gsm_rx ports
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 6 september 16, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without no tice ? 201270c 0 C0.2 C0.4 C0. 6 C0.8 C1.0 C1.2 C1.4 C1. 6 C1.8 C2.0 0.78 0.80 0.82 0.84 0.8 6 0.88 0. 9 00. 9 20. 9 40. 96 frequency ( g hz) in s ertion lo ss (db) figure 5. insertion loss vs frequency (ant to gsm_tx_lb port) 0 C5 C10 C15 C20 C25 C30 C35 C40 C45 attenuation (db) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6 .0 frequency ( g hz) gs m_tx_lb gs m_tx_hb figure 7. attenuation vs frequency (ant to gsm_tx_hb/lb ports) 0 0.2 0.4 0. 6 0.8 1.0 1.2 1.4 1. 6 1.8 2.0 in s ertion lo ss (db) 1. 6 5 1.70 1.75 1.80 1.85 1. 9 01. 9 5 frequency ( g hz) figure 6. insertion loss vs frequency (ant to gsm_tx_hb port) 0 C10 C20 C30 C40 C50 C 6 0 0.80 0.82 0.84 0.8 6 0.88 0. 9 00. 9 20. 9 40. 96 0. 9 8 1.00 frequency ( g hz) i s olation (db) gs m_tx_lb-trx1 gs m_tx_lb-trx2 gs m_tx_lb-trx3 gs m_tx_lb-trx4 figure 8. isolation vs frequency (gsm_tx_lb to trx ports)
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201270c ? skyworks proprietary information ? products and pr oduct information are subject to change without notice ? sep tember 16, 2010 7 0 C10 C20 C30 C40 C50 C 6 0 1.70 1.72 1.74 1.7 6 1.78 1.80 1.82 1.84 1.8 6 1.88 1. 9 21. 9 41. 96 1. 9 0 frequency ( g hz) i s olation (db) gs m_tx_hb-trx1 gs m_tx_hb-trx2 gs m_tx_hb-trx3 gs m_tx_hb-trx4 figure 9. isolation vs frequency (gsm_tx_hb to trx ports) 0 C10 C20 C30 C40 C50 C 6 0 0.8 1.0 1.2 1.4 1. 6 1.8 2.0 2.2 frequency ( g hz) i s olation (db) trx1 (on) C trx2 trx1 (on) C trx4 trx2 (on) C trx4 trx1 (on) C trx3 trx2 (on) C trx3 trx3 (on) C trx2 figure 11. isolation vs frequency (trx to trx ports) C25 C30 C35 C40 C45 C50 C55 C 6 0 C 6 5 C70 03045 15 6 075 9 0 105 135 1 6 5 120 150 180 pha s e (deg) harmonic level s (dbm) 2fo C 824 mhz 3fo C 824 mhz 2fo C 9 15 mhz 3fo C 9 15 mhz figure 13. harmonics vs phase (ant to gsm_tx_lb, p in = +35 dbm, 5:1 vswr mismatch) 0 C10 C20 C30 C40 C50 C 6 0 0.8 1.0 1.2 1.4 1. 6 1.8 2.0 2.2 frequency ( g hz) i s olation (db) trx1 (on)-trx2 trx1 (on)-trx3 trx1 (on)-trx4 figure 10. isolation vs frequency (trx to trx ports) C100 C105 C110 C115 C120 C125 0153045 6 075 9 0 105 120 135 150 1 6 5 180 pha s e (deg) imd3 (dbm) trx1 trx2 trx3 trx4 figure 12. 3 rd order intermodulation di stortion vs phase, trx ports (p fund = 1.95 ghz, f blk = 1.76 ghz, f rx = 2.14 ghz) C25 C30 C35 C40 C45 C50 C55 C 6 0 C 6 5 C70 0 30 45 75 105 135 1 6 5 15 6 0 9 0 120 150 180 pha s e (deg) harmonic level s (dbm) 2fo C 1710 mhz 3fo C 1710 mhz 2fo C 1 9 10 mhz 3fo C 1 9 10 mhz figure 14. harmonics vs phase (p in = +33 dbm, 5:1 vswr mismatch)
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com september 16, 2010 ? skyworks proprietary information ? products a nd product information are subj ect to change without not ice ? 201270c 8 table 4. SKY13364-389LF truth table insertion loss st a te v1 (pin 26) v2 (pin 25) v3 (pin 24) v4 (pin 23) ant to gsm_tx_lb 1 1 0 0 ant to gsm_tx_hb 1 0 0 0 ant to gsm_rx1 0 0 0 0 ant to gsm_rx2 0 0 1 0 ant to gsm_rx3 0 1 1 0 ant to gsm_rx4 0 1 0 0 ant to trx1 1 0 1 0 ant to trx2 1 1 1 0 ant to trx3 1 0 1 1 ant to trx4 1 1 1 1 note : 1 = +1.35 v to +3.10 v (1.8 v typical). 0 = 0 v to +0.3 v. any state other than described in this table places the switch into an undefined state. an undefined state will not damage the device. s ignal g enerator f fund = 1 9 50 mhz, +20 dbm s pectrum analyzer f rx = 2140 mhz s ignal g enerator f blk = 17 6 0 mhz, C15 dbm c oupler to monitor input power c irculator f blk 17 6 0 mhz, C15 dbm f fund 1 9 50 mhz, +20 dbm f rx 2140 mhz, mea s ure tone 1 9 50 mhz bandpa ss filter 17 6 0 mhz bandpa ss filter duplexer pha s e s hifter sky133 6 4-3 8 9lf p fund = +20 dbm p blk = C15 dbm s1909b c irculator figure 15. 3 rd order intermodulation test setup
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201270c ? skyworks proprietary information ? products and pr oduct information are subject to change without notice ? sep tember 16, 2010 9 evaluation board description the SKY13364-389LF evaluation board is used to test the performance of the SKY13364-389LF sp10t switch. an evaluation board schematic diagram is provided in figure 16. an assembly drawing for the evaluation board is shown in figure 17. package dimensions the pcb layout footprint for the SKY13364-389LF is provided in figure 18. typical case markings are shown in figure 19. package dimensions for the 26-pin qfn are shown in figure 20, and tape and reel dimensions are provided in figure 21. package and handling information instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. the SKY13364-389LF is rated to moisture sensitivity level 1 (msl1) at 260 ? c. it can be used for lead or lead-free soldering. care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. production quantities of this product are shipped in a standard tape and reel format. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 6 17 18 1 9 20 21 22 23 24 25 2 6 g nd trx3 tran s mit/receive rf port 3 d c c ontrol voltage 2 trx4 trx5 g nd g nd ant g nd g nd trx2 trx1 gs m_rx1 gs m_rx2 g nd gs m_rx3 g nd g nd gs m_tx_hb g nd g nd gs m_tx_lb v1 v2 v3 v4 vdd s190 6 tran s mit/receive rf port 4 tran s mit/receive rf port 5 antenna gs m rf port, high band gs m rf port, low band gs m rf output port 3 gs m rf output port 2 gs m rf output port 1 tran s mit/receive rf port 2 tran s mit/receive rf port 1 d c c ontrol voltage 1 d c c ontrol voltage 3 d c c ontrol voltage 4 d c power s upply c 1 10 nf figure 16. SKY13364-389LF evaluation board schematic
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 10 september 16, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without n otice ? 201270c s1959 d c h1 c 1 trx1 rx1 rx2 rx3 rx4 tx1 tx2 ant trx4 trx3 trx2 gnd figure 17. SKY13364-389LF evaluation board assembly diagram
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201270c ? skyworks proprietary information ? products and pr oduct information are subject to change without notice ? sep tember 16, 2010 11 2 6 x expo s ed s oldering area ( s ee detail a) 8x r0.10 2x 1. 9 55 0.520 0. 99 0 10x 1. 6 30 1.040 0. 6 20 1 6 x 1.230 0.20 0.42 detail a 2 6 x s cale = 6 0x 0.400 pitch pin 2 6 expo s ed s olderable area 2x ( g round pad) all dimensions are in millimeters s2140 pin 1 c omponent outline c l c l s olderable area figure 18. SKY13364-389LF pcb layout footprint (top view) pin 1 indicator s kywork s part # lot # date c ode: y = c alendar year ww = week s364 xxxx yyww figure 19. typical part markings (top view)
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 12 september 16, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without n otice ? 201270c top view s ide view bottom view 0.10 c pin 1 indicator 2x 0.10 c 2x 0.08 c 2 6 x 3 5 c 0.10 3.00 3.80 a b c s eating plane detail a 0.02 + 0.03/C0.02 1. 99 5 +0.10/C0.15 1. 99 5 +0.10/C0.15 0.20 min., 2 6 x 0.40 pitch 0.27 0.10 0.52 +0.10/C0.15 1.040 0. 99 0 0. 6 2 +0.10/C0.15 0.2 0.05 0.75 0.05 0.10 m c a b detail a s cale: 80x 2 6 place s a ll measurements are in millimeters. dimensioning and tolerancing according to asme y14.5m-1994. coplanarity applies to the exposed bottom surface metalization, as well as the terminals.. plating requirement per source control drawing (scd) 2504. s1904 figure 20. SKY13364-389LF 26-pin qfn package dimensions
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 201270c ? skyworks proprietary information ? products and pr oduct information are subject to change without notice ? sep tember 16, 2010 13 s2141 direction of feed notes: 1. carrier tape: black conductive polystyrene. 2. cover tape material: transparent conductive psa. 3. esd-surface resistivity is 1 x 10 10 ohms/square per eia, jedec tnr speci?cation. 4. ten sprocket hole pitch cumulative tolerance: 0.20 mm. 5. ao and bo measured on plane 0.30 mm above the bottom of the pocket. 6. all measurements are in millimeters. a b 0.30 0.05 4.10 0.10 (bo) 1.75 0.10 ? 1.50 +0.10/C0 ? 1.50 min. 5.50 0.05 a b b a 1.10 0.10 12.00 0.30 3.30 0.10 (ao) 4.00 0.10 2.00 0.05 8.00 0.10 pin #1 indicator figure 21. SKY13364-389LF tape and reel dimensions
data sheet ? sky13364-38 9 lf sp10t switch skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 14 september 16, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without n otice ? 201270c ordering information model n a me m a nuf a cturing p a rt number ev a lu a tion kit p a rt number SKY13364-389LF 0.4-2.2 ghz sp10t sw itch SKY13364-389LF SKY13364-389LF-evb copyright ? 2010 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. sk yworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any ki nd, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, qualit y or non-infringement of any intellectual property right; all su ch warranties are hereby expressly disclaimed. skyworks does not warrant the accura cy or completeness of the information, text, graphics or other items contained within these ma terials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequentia l damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such damage. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products , which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks, the skyworks symbol, a nd breakthrough simplicity are trademarks or registered tradem arks of skyworks solutions, inc ., in the united states and othe r countries. third-party brands and names are for identification purposes only, and are the proper ty of their respective owners. additional information, includ ing relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.

▲Up To Search▲

Price & Availability of SKY13364-389LF

	To Download SKY13364-389LF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .