no-epoxy/no-polish or other consumables required 100 percent factory tested for insertion loss factory-polished end face reliable, proven mechanical splice technology no need for electrical power for ovens or lights quick and easy installa - tion, less than one minute per connector on average typical insertion loss of 0.2 db for upc and 0.4 db for apc connectors low insertion loss and high-performance return loss over 40 million connec - tors deployed in various applications reduces complexity features and benefts | telcordia gr-1209 and gr-1221 standards | specification sheet evo-734-en | page 1 optisnap ? sc apc, lc compatible single-mode field-installable connector an evolant ? solutions product an evolant ? solutions product | preterminated systems | cables | connectors | cable assemblies | hardware | copper connectivity | splice and test equipment | training | optisnap sc connector | photo lan808 optisnap connectors | photo cca204 with proven feld-installable connector technology, fber terminations using the optisnap ? connector system are fast, easy and reliable. the corning cable systems high-precision mechanical splice technology enables fber optic networks to be installed quickly and cost effectively. the corning cable systems go/no-go feedback signal allows the installer to verify that the installation is per - formed right the frst time, every time. insert the fber, activate the cam and watch the pass/fail light illuminate, instilling confdence in every connector installed. the factory-polished ceramic ferrule provides superior quality for end-face geometry. the single-mode optisnap connector is available in an ultra physical contact (upc) polish or an angled physical contact (apc) polish (sc only), offering you a higher grade of performance for your feld terminations. with fast installation time and low insertion loss, the optisnap connector system provides a good alternative to fusion splicing. installation is as easy as strip, clean, cleave, cam and crimp.
specification sheet evo-734-en | page 2 optisnap ? sc apc, lc compatible single-mode field-installable connector an evolant ? solutions product specifcations | intermateability qualifcation durability tensile strength operating temperature nominal fiber od note: upc return loss (-db) -55 typical at 25 degrees c +5 degrees. note: all insertion loss values are given for installation with the optisnap ? connector installation tool, mated to a master reference jumper, terminated on corning fber and tested to corning cable systems recommended procedures. individual optisnap connector installation tools are available for ordering. please contact corning cable systems customer service for additional information. refer to evo-960-en for optisnap tool kit information. connectors are focis compliant with tia/eia 604-3 (sc), focis 10 (lc) passed tia/eia 568-b.3 <0.2 db change, 500 rematings, fotp-21 11.24 lb < 0.2 db change on jacketed cable 1.1 lb < 0.2 db change on 900 m cable 0.5 lb < 0.2 db change on 250 m cable see tables below for connector-specifc operating temperatures 125 m cable part refectance housing connector style polish compatibility number ferrule (db) color sc upc 900 m osnp-scu-900 ceramic -55 typical blue st ? compatible upc 900 m OSNP-STU-900 ceramic -55 typical amber lc upc 900 m osnp-lcu-900 ceramic -55 typical blue sc upc 250 m osnp-scu-250 ceramic -55 typical blue upc connector style cleaver temperature cable refectance connector style type range type (db) upc fbc-014 (angle) -40o to +75oc 250 m -40 max rl upc fbc-015 (flat) -40o to +75oc 250 m -32 max rl upc fbc-015 (flat) 0o to +60oc 900 m -32 max rl upc fbc-016 (angle) 0o to +60oc 900 m clearcurve ? -40 max rl upc operating temperature upc insertion loss (db) typical 0.2 max 0.5
specification sheet evo-734-en | page 3 | preterminated systems | cables | connectors | cable assemblies | hardware | copper connectivity | splice and test equipment | training | optisnap ? sc apc, lc compatible single-mode field-installable connector an evolant ? solutions product note: apc return loss (-db) -60 typical at 25 degrees c +/- 5 degrees. cable part refectance housing connector style polish compatibility number ferrule (db) color sc apc 900 m osnp-sca-900 ceramic -60 typical green sc apc 250 m osnp-sca-250 ceramic -60 typical green apc connector style specifcations | continued cleaver temperature cable refectance connector style type range type (db) apc fbc-014 (angle) -40o to +75oc 250 m -50 max rl apc fbc-015 (flat) -40o to +75oc 250 m -40 max rl apc fbc-015 (flat) 0o to +60oc 900 m -40 max rl apc fbc-016 (angle) 0o to +60oc 900 m clearcurve ? -50 max rl apc operating temperature apc insertion loss (db) typical 0.4 max 0.75 note: all insertion loss values are given for installation with the optisnap ? connector installation tool, mated to a master reference jumper, terminated on corning fber and tested to corning cable systems recommended procedures. individual optisnap connector installation tools are available for ordering. please contact corning cable systems customer service for additional information. refer to evo-960-en for optisnap tool kit information.
optisnap ? sc apc, lc compatible single-mode field-installable connector an evolant ? solutions product specification sheet evo-734-en | page 4 corning cable systems llc ? po box 489 ? hickory, nc 28603-0489 usa 800-743-2675 ? fax: 828-325-5060 ? international: +1-828-901-5000 ? www.corning.com/cablesystems corning cable systems reserves the right to improve, enhance and modify the features and specifcations of corning cable systems products without prior notifcation. evolant and optisnap are registered trademarks of corning cable systems brands, inc. clearcurve is a registered trademark of corning incorporated. st is a registered trademark of lucent technologies. all other trademarks are the properties of their respective owners. corning cable systems is iso 9001 certifed. ? 2007, 2010 corning cable systems. all rights reserved. published in the usa. evo-734-en / october 2010 description optisnap ? st ? compatible connector, single-mode, upc polish, ceramic ferrule, single pack, amber housing, blue 900 m and 2.9 mm boots optisnap sc connector, single-mode, upc polish, ceramic ferrule, single pack, blue housing, blue 900 m and 2.9 mm boots optisnap lc connector, single-mode, upc polish, ceramic ferrule, single pack, blue housing, blue 900 m and 2.9 mm boots optisnap sc connector, single-mode, upc polish, ceramic ferrule, single pack, blue housing, blue 900 m boot, only compatible with 250 m cable optisnap sc connector, single-mode, apc polish, ceramic ferrule, single pack, green housing, green 900 m and 2.9 mm boots optisnap sc connector, single-mode, apc polish, ceramic ferrule, single pack, green housing, green 900 m boot, only compatible with 250 m cable optisnap st compatible connector, single-mode, upc polish, ceramic ferrule, 25-piece box, amber housing, blue 900 m and 2.9 mm boots optisnap sc connector, single-mode, upc polish, ceramic ferrule, 25-piece box, blue housing, blue 900 m and 2.9 mm boots optisnap lc connector, single-mode, upc polish, ceramic ferrule, 25-piece box, blue housing, blue 900 m and 2.9 mm boots optisnap sc connector, single-mode, upc polish, ceramic ferrule, 25-piece box, blue housing, blue 900 m boot, only compatible with 250 m cable optisnap sc connector, single-mode, apc polish, ceramic ferrule, 25-piece box, green housing, green 900 m and 2.9 mm boots optisnap sc connector, single-mode, apc polish, ceramic ferrule, 25-piece box, green housing, green 900 m boot, only compatible with 250 m cable part number single packs OSNP-STU-900 osnp-scu-900 osnp-lcu-900 osnp-scu-250 osnp-sca-900 osnp-sca-250 organizer packs OSNP-STU-900-z osnp-scu-900-z osnp-lcu-900-z osnp-scu-250-z osnp-sca-900-z osnp-sca-250-z ordering information | note: all insertion loss values are given for installation with the optisnap connector installation tool, mated to a master reference jumper, terminated on corning fber and tested to corning cable systems recommended procedures. individual optisnap connector installation tools are available for ordering. please contact corning cable systems customer service for additional information. refer to evo-960-en for optisnap tool kit information.
|
