OS-LM01M-RGB 2003-02-21 1 opto semiconductors data sheet linearlight colormix OS-LM01M-RGB specification for the minimum sub module (10 leds) operating at 100% brightness type color wavelength ( l d nom.) luminous intensity (cd) luminous flux (lm) supply voltage (v) maximum current (ma) maximum p o wer (w) os-lm01m-rxx red 617 nm 3.5 10.5 24dc 25 0.6 os-lm01m-xgx green 525 nm 3.5 10.5 24dc 41 0.985 os-lm01m-xxb blue 470 nm 1.0 3 24dc 41 0.985 all colors rgb 8.0 24 24dc 107 2.57 specification for a complete module (30 leds) operating at 100% brightness type color luminous intensity (cd) luminous flux ( lm) supply voltage (v dc ) maximum cu r rent (ma) maximum power (w) OS-LM01M-RGB rgb 24 72 24 300 7.7 applications a linear led-module for various applications e.g. coupling led-light into diffused or engraved transparent glass and plastic profile luminaires outline markers backlighting diffusing glass and plastics indirect illumination linearlight for dynamic color applications utilises multi- led incorporating 3 individual led die ( red/ green/ blue) low heat generation complete module contains 30 leds on a 15 mm pitch complete module dimensions 450 mm x 11.5 mm x 3.65 mm (l*w*h) the module can be sub-divided into sub m o - dules containing 10 led or multiples of 10 leds maximum of 10 modules in parallel
OS-LM01M-RGB 2003-02-21 2 opto semiconductors maximum ratings parameter symbol value unit temperature at tc-point t c -30 ... +65 c storage temperature t stg -30 ... +65 c maximum operating voltage v max 25 v dc maxiumum reverse voltage v r 25 v dc assembly information solder connections should only be made at the designated solder pads or connection by connect system rast 2,5 nr. mfmp 7238, manufacturer stocko contact, d- 42327 wuppertal www.stocko.de . each module can be divided into submodules ( 10 led) by cutting carefully at the points indic a ted maximum of 10 modules (30 leds) in parallel the module is not protected against humidity or dust. in applications where excessive humidity or dust is present the construction of any luminaire should ensure that the module is in accordance with european standards. the operating temperature of the module should be measured at the maximum design ambient temp e - rature with it installed in a completed luminaire by using a thermosensor or temperature sticker. these are available from distributors such as rs components ( http://www.rswww.com ) power supplies and control units linearlight colormix should be powered by a 24v dc power supply such as the osram optotronic 24 v range. dimming and color control is effected by pulse width modulation (pwm) of the individual red, green and blue 24v supplies. suitable rgb-controllers include: osram ot rgb 3 ? channel dim . a 3 ? channel dimming/ color controller with industry standard 1-10 v control outputs, used in conjunction with 3 osram ot dim pwm dimming units. ot rgb sequencer dim . as the ot rgb 3 channel dim but incorporating an integrated sequencer further information and wiring diagrams are included in the control unit datasheets ordering code os-lm 01m-rgb packaging unit 10 pcs.
OS-LM01M-RGB 2003-02-21 3 opto semiconductors technical drawing measures in mm tc point 1 2 . 0 1 1 . 4 3 , 8 5 3 , 4 5
|
