9 solder-in style high temp emi filters zs/zr series ?.128 dia. ?circuits available ?c & l the zs series provides effective filtering in the microwave frequency spectrum from 10 mhz through 26 ghz. designed to be soldered into a package, bracket or bulkhead (and maintain hermeticity), it is ideal for high impedance circuits where large capacitance values are not practical. in the ??section version an internal fer- rite bead element provides both induc- tance and series resistance (lossy charac- teristic) which improves insertion loss and provides superior transient performance. alternate lead lengths or special capaci- tance values may be ordered. custom packages or bracket assemblies utilizing this feedthru can be furnished to your specifications. ?meets or exceeds the applicable portions of mil-f-28861/12. see qpl listings. ?high temperature construction with- stands 300? installation temperatures. ?features rugged monolithic discoidal capacitor construction. ?glass hermetic seal on one end with epoxy seal on the opposite end. ?high purity gold plating provides excel- lent solderability or compatibility with thermal and ultrasonic wire bonding. 1. plating: gold standard ? silver and solder coat available 2. material: case: cold rolled steel leads: alloy 52 steel 3. operating temperature range: -55? to +125? 4. insulation resistance: at 25?: 1,000 megohm-microfarad min., or 100,000 megohms min., whichever is less at 125?: 100 megohm-microfarad min., or 10,000 megohms min., whichever is less 5. dielectric withstanding voltage (dwv): r-level designs: 2.0 times rated dc voltage class b, class s designs: 2.5 times rated dc voltage 6. dc resistance (dcr): .01 ohm, maximum 7. dissipation factor (df): 3% maximum 8. rated dc current: 5 amps, maximum 9. maximum installation temperature: 300? 10. supplied with 60/40 solder preform for easy installation 11. insertion loss for the ??and ??circuits are equivalent due to the saturation characteristic of the ferrite bead element at full rated current. at lower currents the ??becomes much more effective. specifications .128 .005 .020 .005 a .25 .03 b glass seal .156 .005 .030 .002 0.05 (.002) 3.25 (.128) 0.13 (.005) 3.96 (.156) 0.51 (.020) 5.08 (.200) 0.76 (.030) 6.4 (.25) 0.8 (.03) 15.88 (.625) 2.79 (.110) 18.16 (.715) notes: 1. outline drawing shows stan- dard zs configuration. also available with glass seal at the opposite end, zr reverse configuration. 2. mil-f-28861/12 style fs70 equivalent to standard zs configuration. style fs71 is reverse zr configuration. 3. for zs2 or zr2 l-section filters inductor always posi- tioned at epoxy-filled end. 4. metric equivalent dimensions given for information only. millimeters (inches) c zs1, zr1 circuit diagrams standard configuration zs2 (see note 3) glass seal end flange end zr2 glass seal end flange end characteristics applications dimensions circuit a b diagram ?005 nom. l .200 .715 c .110 .625 dash no. style 001 through 016, fs70 033 and 034 017 through 032, fs71 035 and 036 mil-f-28861/12 (see note 2) (see note 4)
solder-in style high temp emi filters zs/zr series ?.128 dia. ?circuits available ?c & l 10 insertion loss 2 per mil-std-220, +25? avx current dc cap 1 500 1 10 100 1000 10 p/n amp ckt voltage min. khz mhz mhz mhz mhz ghz zs1c2-501h 5 c 50 500 15 30 50 zs1c2-102h 5 c 50 1000 4 20 31 55 zs1c2-122h 5 c 50 1200 5 20 35 55 zs1c2-272h 5 c 50 2700 10 25 40 60 zs1c2-502h 5 c 50 5000 15 30 45 60 zs1c2-103h 5 c 50 .010 4 20 35 48 60 zs1c2-153h 5 c 50 .015 7 25 40 50 60 zs2c2-501h 5 l 50 500 15 30 50 zs2c2-102h 5 l 50 1000 4 20 33 55 zs2c2-122h 5 l 50 1200 5 20 37 55 zs2c2-272h 5 l 50 2700 10 25 40 60 zs2c2-502h 5 l 50 5000 15 30 45 60 zs2c2-103h 5 l 50 .010 4 20 38 50 60 zs2c2-153h 5 l 50 .015 7 25 42 50 60 zs1a2-101h 5 c 100 100 3 20 30 zs1a2-501h 5 c 100 500 15 30 50 zs1a2-102h 5 c 100 1000 4 20 31 55 zs1a2-122h 5 c 100 1200 5 20 35 55 zs1a2-272h 5 c 100 2700 10 25 40 60 zs1a2-502h 5 c 100 5000 15 30 45 60 zs1a2-103h 5 c 100 .010 4 20 35 48 60 zs1a2-153h 5 c 100 .015 7 25 40 50 60 zs2a2-100h 5 l 100 10 510 zs2a2-250h 5 l 100 25 1015 zs2a2-101h 5 l 100 100 3 20 30 zs2a2-501h 5 l 100 500 15 30 50 zs2a2-102h 5 l 100 1000 4 20 33 55 zs2a2-122h 5 l 100 1200 5 20 37 55 zs2a2-272h 5 l 100 2700 10 25 40 60 zs2a2-502h 5 l 100 5000 15 30 45 60 zs2a2-103h 5 l 100 .010 4 20 38 50 60 zs2a2-153h 5 l 100 .015 7 25 42 50 60 1 decimal point values indicate capacitance in microfarads. non-decimal point values indicate capacitance in picofarads. 2 insertion loss limits are based on theoretical values. actual measurements may vary due to internal capacitor resonances and other design constraints. note: avx filters' standard configurations (e.g. zs, ys, xs, ws) have the hermetic glass seal opposite the flange end. all parts are capable of the reverse configuration with the glass seal at the flange end. all parameters are otherwise identical. the part number changes from ??to ??(e.g., standard = zs 1c2-153h; reverse = zr 1c2-153h). for special multi-unit assemblies see multi-component filter brackets section. specifications continued
51 how to order notes note 1: capacitance code all avx filters part numbers, with exception of certain cylin- drical styles, show total filter capacitance using the 3-digit eia code. the first two digits are significant: the last digit is the multiplier. example: 103=10000 picofarads 125=1200000 picofarads (1.2 microfarads) it is important to note that 1 filters and multisection filters are described using the eia code from the standpoint of total capacitance. capacitance is understood to be specified as ?uaranteed minimum value?(gmv) unless otherwise specified. avx filters can supply ?0% or other specified tolerances at an additional charge. contact avx filters applications engineering for further information. note 2: reliability codes the customer must select the reliability code to be consis- tent with the filter application. as a minimum, all catalog filters are available as r-level designs. options: ??signifies an r-level filter design without the optional r-level high-rel screening ??r-level design with optional r-level high-rel screening also specified ??class b design with group a screening per m28861 for class b filters ??class s design with group a screening per m28861 for class s (space grade) filters please refer to the catalog section on reliability for additional information on how to select reliability codes. note 3: special design code (assigned by avx filters) a special suffix to the standard part number will be added by avx filters applications engineering to describe special designs or designs that are controlled by customer specifi- cations. it is important to note that even in those instances where a customer drawing describes a standard catalog design it is avx filters policy to assign a special part number to the customer drawing for configuration control. note 4: voltage codes and filter voltage ratings important: please contact avx filters applications engineering when considering dc-rated filter designs for possible use in ac applications. as a general rule, dc designs may be derated for ac applications. let us assist you. the voltage code letters must be selected consistent with the capabilities as outlined in the product selection tables for a given filter type. it is important to note that the same code letter may signify a different voltage rating depending upon filter type. for example: the ??code signifies a 200 vdc/125 vac rating for a bolt-style filter, but it describes a 300 vdc/125 vac design when applied to a jd-style filter. note 5: terminal and leadwire codes non-standard terminal configurations including special materials or finishes are available. please indicate a descrip- tion and/or outline drawing when requesting a non-standard terminal (code ??. note 6: special information for cylindrical style filters l-section filter designs must be specified with regard to ?tandard?or ?everse?configuration. the l-section filter is normally utilized with the capacitor on the high impedance side of the circuit and the inductor looking into the low impedance side. compact filter types such as the bk2 or ck2 button filters with ferrite bead inductors are only supplied with the bead assembled into the threaded end. gk2 and jd2 l-section filters are normally supplied with a schematic or other marking to indicate location of the inductor. ac-rated catalog designs incorporate reduced values of capacitance to limit reactive current heating (and subsequent filter temperature rise) to safe levels. do not specify a dc-rated filter with larger capacitance for an ac application without contacting avx filters applications engineering.
52 how to order part number construction basic style zz z y x w glass seal orientation s - standard r - reverse q - hermetic (glass both sides) n - no glass (epoxy both sides) circuit 0 - non-feed thru post 1 - feed thru 2 - l-section voltage a - 100 vdc b - 200 vdc c - 50 vdc e - 400 vdc/ 230 vac f - 500 vdc g - 1000 vdc k - 250 vdc l - 300 vdc or 200 vdc/ 115 vac m - 350 vdc n - 70 vdc reliability code see notes 3-digit capacitor code (in pf) use ?? to specify hi- temperature (300?) rated design y - solder special design (customer dwg. or qpl designation) lead 2 - nickel iron (standard) 3 - special 4 - aluminum compatible with seating flange (std. lead) 5 - aluminum compatible with seating flange (special lead) d - aluminum compatible with centering flange (std. lead) e - aluminum compatible with centering flange (special lead) f - aluminum compatible with special design zs2c 2 103hxx circuit 1 - feedthru (c) 2 - l-section (l) 3 - pi-section ( 1 ) voltage a - 100 vdc b - 200 vdc c - 50 vdc f - 500 vdc g - 1000 vdc h - 150 vdc j - 600 vdc k - 250 vdc l - 200 vdc/ 125 vac m - 350 vdc n - 70 vdc terminal 1 - copper 2 - steel 3 - special lead design 4 - beryllium copper reliability code (-see note 2) 3-digit capacitor code (-see note 1) special design (-see note 3) sb 2 a 1 1 0 3 x x solder-in style bolt style basic style sa-4-40 epoxy sealed sg-6-32 epoxy sealed sb-8-32 epoxy sealed sm-8-32 hermetic sealed sh-10-32 epoxy sealed sj-12-28 epoxy sealed sc-12-32 epoxy sealed (.187 hex) sp-12-32 epoxy sealed (.250 hex) sn-12-32 hermetic sealed sl-1/4-28 epoxy sealed sd-5/16-24 epoxy sealed sf-5/16-32 epoxy sealed
53 how to order part number construction cylindrical style basic style a - button type (.410 dia.) b - button type (.375 dia.) c - extended button g - .375" dia. j - .690" dia. h - .410" dia. f - .250" dia. q - special thread type k - 1/4-28 herm seal l - 1/4-28 epoxy seal m - 8-32 herm seal n - 12-32 herm seal t - 1/4-28 post terminal (both ends) v - 1/4-28 post and flag terminal x - 1/4-28 hex adaptor circuit 0 - feedthru lead (without capacitor) 1 - feedthru capacitor 2 - l-section filter 3 - pi filter 4 - t-section 5 - double l-section 6 - five element cap input 7 - five element ind input 8 - special ckt. design voltage a - 100 vdc b - 200 vdc c - 50 vdc e - 400 vdc/ 230 vac f - 500 vdc g - 1000 vdc h - 150 vdc j - 600 vdc k - 250 vdc l - 200 vdc/ 125 vac (except jd series 300 vdc/ 125 vac) m - 350 vdc n - 70 vdc current rating code current 01 .06 amp 02 .1 03 .15 04 .25 05 .3 06 .45 07 .5 08 1 09 2 10 3 11 5 12 10 16 4 17 6 18 .75 19 1.5 g k 2 a a s07 xx thread length a - .187" b - .312" reliability code (see notes) special design (customer dwg. or qpl designation) feedthru s & bk2, ck2 all other circuit types x x x capacitance in picofarads circuit s - standard l (inductor at thread end) r - reverse l (capacitor at thread end) p - pi-circuit m - multi section t - t circuit please contact the factory for filter plates and other custom product part numbers. notice: specifications are subject to change without notice. contact your nearest avx sales office for the latest specification s. all statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. the user should not assume that all safety measures are indicated or that o ther measures may not be required. specifications are typical and may not apply to all applications.
|
