spec no: dsab8714 rev no: v.4 date: mar/20/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.cheng package dimension s 3.0x2.2mm single color surface mount led lam p ka - 3022syc - 4.5sf super bright yellow features 3.0mm x 2.2mm smt led,1.5mm thickness. ultra - compact type assures space saving. high efficiency & low power consumption. package: 1500pcs / reel. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice. description the super bright yellow device is made with dh ingaalp (on gaas substrate) light emitting diode chip.
spec no: dsab8714 rev no: v.4 date: mar/20/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.cheng electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20 ma viewing angle min. typ. 2 ? 1/2 ka - 3022syc - 4.5sf super bright yellow (ingaaip) water clear 50 120 90 symbol parameter device typ. max. test conditions units peak peak wavelength super bright yellow 590 nm i f =20ma d dominant wavelength super bright yellow 588 nm i f =20ma ? 1/2 spectral line half - width super bright yellow 28 nm i f =20ma c capacitance super bright yellow 25 pf v f =0v;f=1mhz v f forward voltage super bright yellow 2.0 2.5 v i f =20ma i r reverse current super bright yellow 10 ua v r = 5v parameter super bright yellow units power dissipation 125 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating / storage temperature - 40c to +85c
spec no: dsab8714 rev no: v.4 date: mar/20/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.cheng super bright yellow ka - 3022syc - 4.5sf
spec no: dsab8714 rev no: v.4 date: mar/20/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.cheng recommended soldering pattern (units : mm ) tape specifications (units : mm ) ka - 3022syc - 4.5sf remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
