aps character polypropylene film capacitor type aps features suitable for snubbed circuits, small watts resonance circuits. protected against moisture and solvent through our original epoxy resin vacuum impregnation. temperature characteristic of capacitance is negative. tangent of loss angle is very low, with an excellent long stability. specifications temp range 100v -25 to +70c (+85c) * 250v, 400v-40 to +85c voltage 100v, 250v, 400v.d.c capacitance 100v 0.00010 to 0.22microf (e-24) 250v 0.00010 to 0.010micro-f (e- 24) 400v 0.0010 to 0.010microf (e- 12) cap. tolerance 100 +/-1.0%(f), +/-2%(g), +/-5%(j) 250v, 400v+/-5%(j), +/-10%(k) tangent of loss angle c =< 0.10 microf0.0010 or less (at 1 khz) c > 0.10 microf 0.0012 or less insulation resistance 30,000m-ohm or more endurance 85 wv x 14%, 1000hr c/c+/-3% within tan-delta 0.011 or less ir 25,000m-ohm or more damp heat 40c, 90 to 95% rh wv 500hr c/c+/-3% within tan-delta 0.012 or less ir 10,000m-ohm or more style straight lead type single formed lead type cap range 100v.d.c. 101 to 224 123 to 124 134 to 224 101 to 113 250v.d.c. 101 to 103 101 to 103 -- 250v.d.c. 101 to 103 101 to 103 -- style double formed lead type cap range 101 to 363 f1=5.0 134 to 224 f 1 =7.5 393 to 124 f 1 =7.5 - 101 to 103 f 1 =5.0 - 102 to 103 f 1 =5.0 - for a pitch space (f) of the taping specification, refer to taping dimension on p.5. *() marked temperature shows opera table range when voltage derated. dimensions (mm) type amr wv aps 100v.d.c. aps 100v.d.c. aps 100v.d.c. size wh t p f d wh t p f d wh t p f d cap (microf) 101 0.00010 6.0 9.0 4.0 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 121 0.00012 6.0 9.0 4.0 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 151 0.00015 6.0 9.0 4.0 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 181 0.00018 6.0 9.0 4.0 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 221 0.00022 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 271 0.00027 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 331 0.00033 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 391 0.00039 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 471 0.00047 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 561 0.00056 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 681 0.00068 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 821 0.00082 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 102 0.0010 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 7.5 10.0 4.5 5.0 5.0 0.5 122 0.0012 6.0 8.5 3.5 3.5 5.0 0.5 6.5 8.5 4.0 3.5 5.0 0.5 7.5 10.0 4.5 5.0 5.0 0.5 152 0.0015 6.0 8.5 3.5 3.5 5.0 0.5 7.5 8.5 4.0 3.5 5.0 0.5 7.5 10.0 4.5 5.0 5.0 0.5 182 0.0018 6.0 8.5 3.5 3.5 5.0 0.5 6.0 8.5 4.0 3.5 5.0 0.5 8.0 10.5 4.5 5.0 5.0 0.5 222 0.0022 6.0 8.5 3.5 3.5 5.0 0.5 6.3 8.5 4.0 3.5 5.0 0.5 8.0 10.5 4.5 5.0 5.0 0.5 272 0.0027 6.0 8.5 3.5 3.5 5.0 0.5 6.5 8.5 4.0 3.5 5.0 0.5 7.5 13.0 4.5 5.0 5.0 0.5 332 0.0033 6.0 8.5 3.5 3.5 5.0 0.5 7.0 8.5 4.0 3.5 5.0 0.5 7.5 13.0 4.5 5.0 5.0 0.5 392 0.0039 6.0 8.5 3.5 3.5 5.0 0.5 7.0 10.0 4.0 3.5 5.0 0.5 8.0 13.0 5.0 5.0 5.0 0.5 472 0.0047 6.0 8.5 3.5 3.5 5.0 0.5 7.5 10.5 4.0 3.5 5.0 0.5 8.5 13.0 5.0 5.0 5.0 0.5 562 0.0056 6.0 8.5 3.5 3.5 5.0 0.5 8.0 11.0 4.5 3.5 5.0 0.5 8.5 13.5 5.0 5.0 5.0 0.5 682 0.0068 6.0 8.5 3.5 3.5 5.0 0.5 8.0 11.0 5.0 3.5 5.0 0.5 9.0 13.5 5.0 5.0 5.0 0.5 822 0.0082 7.0 9.5 4.0 3.5 5.0 0.5 8.0 11.0 5.5 3.5 5.0 0.5 9.0 13.5 5.0 5.0 5.0 0.5 103 0.010 7.0 9.5 4.0 3.5 5.0 0.5 8.5 11.0 5.5 3.5 5.0 0.5 9.5 13.5 5.0 5.0 5.0 0.5 123 0.012 7.5 10.5 4.0 5.0 5.0 0.5 153 0.015 7.5 10.5 4.5 5.0 5.0 0.5 183 0.018 8.0 11.0 5.0 5.0 5.0 0.5 223 0.022 8.0 11.0 5.0 5.0 5.0 0.5 273 0.027 9.0 12.0 5.5 7.5 5.0/7.5 0.5 333 0.033 9.0 12.0 5.5 7.5 5.0/7.5 0.5 393 0.039 10.0 13.0 6.0 7.5 5.0/7.5 0.5 473 0.047 10.0 13.0 6.0 7.5 5.0/7.5 0.5 563 0.056 11.0 14.0 6.0 7.5 5.0/7.5 0.5 683 0.068 11.0 14.0 6.5 7.5 5.0/7.5 0.5 823 0.082 11.5 14.0 7.0 7.5 5.0/7.5 0.5 104 0.10 12.0 14.0 7.5 7.5 5.0/7.5 0.5 124 0.12 13.0 14.0 8.0 7.5 5.0/7.5 0.5 154 0.15 14.0 19.5 7.5 10.0 5.0/7.5 0.6 184 0.18 15.0 19.5 7.5 10.0 5.0/7.5 0.6 224 0.22 15.0 19.5 8.0 10.0 5.0/7.5 0.6 caution aps is sensitive for heating due to its construction and film material. refer to instructions for soldering handling of page 10. when using our capacitors, please consider the application notes on pages 8-15 and contact nissei for any additional technical specifications relating to the limits of our performance characteristics. / c z 9 / c z 6 / c z * / c z 2 / k p t f r / c z r ( r ( r / c z r ( r / c z r r r r ( r r r r ( r nissei
|
