spec no: dsaf1357 rev no: v.1 date: mar/28/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.cheng erp: 120 3003465 - 01 package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .2(0.008") unless otherwise noted. 3. specifications are subject to change without notice. 3.5 x2.8mm smd chip led lamp aped3528syck - f01 super bright yellow description the super bright yellow source color devices are made with dh ingaalp on gaas substrate light emitting diode. features single color. suitable for all smt assembly and solder process. ideal for backlighting. available on tape and reel. package: 500pcs / reel. rohs compliant.
spec no: dsaf1357 rev no: v.1 date: mar/28/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.cheng erp: 120 3003465 - 01 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 aped3528syck - f01 super bright yellow (ingaaip) water clear 70 200 40 symbol parameter device typ. max. test conditions units peak peak wavelength super bright yellow 590 nm i f =20ma d dominant wavelength super bright yellow 590 nm i f =20ma ? 1/2 spectral line half - width super bright yellow 20 nm i f =20ma c capacitance super bright yellow 20 pf v f =0v;f=1mhz v f forward voltage super bright yellow 2.0 2.5 v i f =20ma i r reverse current super bright yellow 10 ua v r = 5v parameter super bright yellow units power dissipation 125 mw dc forward current 30 ma peak forward current [1] 175 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaf1357 rev no: v.1 date: mar/28/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.cheng erp: 120 3003465 - 01 super bright yellow aped3528syck - f01
spec no: dsaf1357 rev no: v.1 date: mar/28/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.cheng erp: 120 3003465 - 01 recommended soldering pattern (units : mm) tape specifications (units : mm) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. aped3528syck - f01
|
