double balanced mi x er multi-octave band lo (ghz) 4 .0-18.0 4 .0-18.0 7 .0-18.0 4 .0-18.0 4 .0-16.0 4 .0-18.0 4 .0-18.0 4 .0-18.0 4 .0-18.0 4 .0-18.0 rf (ghz) 6.0-18.0 6.0-18.0 7 .0-16.0 6.0-18.0 6.0-18.0 6.0-18.0 6.0-18.0 6.0-18.0 if (mhz) d c -2000 d c -3000 d c -4000 d c -4000 d c -4000 d c -4000 d c -4000 min 25 db 20 db 20 db typical 5.5 db 6.0 db 6.2 db 6.5 db 40 db 38 db 27 db 28 db +2 dbm +5 dbm +8 dbm +12 dbm +11 dbm +14 dbm +18 dbm +23 dbm +7 dbm +10 dbm +14 dbm +19 dbm max 7 .5 db 8.0 db 8.0 db 8.5 db mm93 mm94 mm96 mm97 mm93 mm94 mm96 mm97 mm93 mm94 mm96 mm97 condition s electrical specifications (1) : parameter ssb conversion loss: (2) (3) isolation l o to rf: lo to if: rf to if: input 1 db compression point: input third order intercept point: lo power: (4) model MM9XXG-30 rf 6.0 to 18.0 ghz notes: 1. specifications are guaranteed when tested as a downconverter in a 50 ohm system from -55 ? c to +100 ? c with the nominal lo powe r . specifications indicated as typical are not guaranteed. 2. noise figure is typically within 0.5 db of conversion loss for if frequencies greater than 10 mhz. 3. conversion loss typically degrades less than 0.5 db at +100 ? c and improves less than 0.5 db at -55 ? c. 4. usable lo drives are up to 2 db below and 3 db above nominal. t ypica l p er f o r manc e a t 2 5 ? c drop-in module or w ith sma(f) connectors m = module p = with connectors lo power 3 = +7 dbm 4 = +10 dbm 6 = +14 dbm 7 = +19 dbm all dimensions are in inches and [mm]. outline: g MM9XXG-30 spectru m model MM9XXG-30 specifications spectrum microwave 2144 franklin drive n.e. palm ba y , fl 32905 ph (888) 553-7531 fax (888) 553-753 2 spectrum microwave (europe) 2707 black lake place philadelphia, pa 19154 ph (215) 464-4000 fax (215) 464-4001 ww w .spectrummicrowave.co m rev. 4/26/07
|
