View EDSX7-66H_3346949.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

level transmitter the fcx -a iii level transmitter accurately measures liq uid level and transmits a proportional 4 to 20ma signal. the trans- mitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor tech nology to provide exceptional performance and functionality. 1. high accuracy 0.2% accuracy for all calibrated spans is a standard feature for all models covering 0.32kpa {3.2mbar} range to 500kpa {5bar} high differential pressure range. 0.1% accuracy is available as option. fuji?s micro-capacitance silicon sensor assures this accuracy for all elevated or suppressed calibra tion ranges without additional adjust- ment. 2. minimum environmental in uence the ?advanced floating cell? design which protects the pressure sensor against changes in tempera ture, static pressure, and overpressure substantially re duces total measurement error in actual ? eld applications. 3. fuji/hart bilingual communications protocol fcx -a iii series transmitter offers bilingual communica- tions to speak both fuji proprietary protocol and hart ? . any hart ? compatible devices can communicate with fcx -a iii . 4. application exibility various options that render the fcx -a iii suitable for almost any process applications include: ? full range of hazardous area approvals ? built-in rfi ? lter and lightning arrester ? 5-digit lcd meter with engineering unit ? stainless steel electronics housing ? wide selection of materials ? high temperature, high vacuum service. 5. programmable output linearization function output signal can be freely programmable. (up to 14 compensated points at approximation.) 6. burnout current exibility (under scale: 3.2 to 4.0ma, over scale: 20.0 to 22.5ma) burnout signal level is adjustable using model fxw hand held communicator (hhc) to comply with namur ne43. 7. dry calibration without reference pressure thanks to the best combination of unique construction of mechanical parts (sensor unit) and high performance electronics circuit (electronics unit), reliability of dry calibration without reference pressure is at equal level as wet calibration. data sheet fke ... 5 date EDSX7-66H aug. 10, 2011 features specifications functional speci cations service: liquid, gas, or vapour static pressure, span, and range limit: remark: to minimize environmental in? uence, span should be greater than 1 /40 of the max. span in most applications. ? lower limit of static pressure (vacuum limit) ; silicone ? ll sensor: see fig.1 fluorinated ? ll sensor: 66kpa abs (500mmhg abs) at temperature below 60 c. ? the maximum span of each sensor can be converted to different units using factors as below. 1mpa=10 3 kpa=10bar=10.19716kgf/cm 2 =145.0377psi 1kpa=10mbar=101.9716mmh 2 o=4.01463inh 2 o overrange limit: to maximum static pressure limit output signal: 4 to 20ma dc with digital signal superim- posed on the 4 to 20ma signal power supply: transmitter operates on 10.5v to 45v dc at transmitter terminals. 10.5v to 32v dc for the units with optional arrester. range limit [kpa] {m bar} fke 3 fke 5 fke 6 type span limit [kpa] {m bar} +/? 32 { +/? 320} +/? 130 { +/? 1300} +/? 500 { +/? 5000} max. 0.32 {3.2} 1.3 {13} 5 {50} min. static pressure ? ? ? 32 {320} 130 {1300} 500 {5000} up to ? ange rating
2 fke ... 5 process: load limitations: see ? gure below 2000 [] 1500 1000 load resistance 500 250 0 1474 577 operating area 24v 45v 10 16.35 50 e[ v ] 10.5v power voltage (dc) r= e-10.5 (imax+0.9)x10 -3 note: for communication with hhc (1) (model: fxw), min. of 250: required. hazardous locations: see table 2 zero/span adjustment: zero and span are adjustable from the hhc (1) . zero and span are also adjustable externally from the adjustment screw. damping: adjustable from hhc or local con? gurator unit with lcd display. the time constant is adjustable between 0.06 to 32 seconds. zero elevation/suppression: ?100% to + 100% of url normal/reverse action: selectable from hhc (1) indication: analog indicator or 5-digit lcd meter, as speci? ed. burnout direction: selectable from hhc (1) if self-diagnostic detect transmitter failure, the analog signal will be driven to either ?output hold?, ?output overscale? or ?output underscale? modes. ?output hold?: output signal is hold as the value just before failure happens. ?output overscale?: adjustable within the range 20.0ma to 22.5ma from hhc (1) ?output underscale?: adjustable within the range 3.2ma to 4.0ma from hhc (1) 3.2 4 20 22.5 [ma] over scale burnout probable over range probable under range normal operating range under scale burnout output limits comforming the namur ne43 by order. loop-check output: transmitter can be con? gured to provide constant signal 3.2ma through 22.5ma by hhc (1) . temperature limit: ambient: ?40 to + 85c (?20 to + 80c for lcd indicator) (?40 to + 60c for arrester option) (?10 to + 60c for ? uorinated oil ? ll transmitter) for explosionproof units (? ameproof or intrinsic safety), ambient temperature must be within the limits speci- ? ed in each standard. storage: ?40 to + 90c humidity limit: 0 to 100% rh communication: with hhc (1) (model fxw, consult data sheet no. eds8-47), following items can be remotely displayed or con? gured. note: hhc?s version must be higher than 7.0 (or fxw 1? 4), for fcx -a iii . local con gurator with lcd display (option): local con? gurator with 3 push button and lcd display can support following items. items by communication with fxw by local con? gurator (with 3 push button) display set display set tag no. vvvv model no. vvvv serial no. & software version v ? v ? engineering unit vvvv range limit v ? v ? measuring range vvvv damping vvvv output mode v ? v ? burnout direction vvvv calibration vvvv output adjust ? v ? v data v ? v ? self diagnoses v ? v ? printer (in case of fxw with printer option) v ??? external switch lock vvvv transmitter display vvvv linearize vv ?? rerange vvvv saturate current vvvv write protect vvvv history ? calibration history ? ambient temperature history v v v ? v v v ? programmable output linearization function: output signal can be characterized with ?14 points linear approximation function? from hhc (1) . emc conformity: en61326-1: 2006 atmospheric pressure 2.7kpa abs {20.3mmhg abs} 0.13kpa abs {0.98mmhg abs} w, a and d h j y and g s t k fluorinated oil silicone oil ?20 to 120c ?15 to 250c 20 to 300c ?40 to 120c ?15 to 250c 20 to 300c ?15 to 150c low pressure side contact liquid temperature on transmitter of code h, j, s, t is 120c or lower. low pressure side contact liquid temperature of code k is 85c or lower code in the 13th digit of ?code symbols? process temperature lower limit of static press (note) (1) hhc: hand held communicator
3 mounting position effect: zero shift, less than 0.3kpa {3m bar} for a 10 tilt in any plane. (no extension) no effect on span. this error can be corrected by adjusting zero. dielectric strength: 500v ac, 50/60hz 1 min., between cir cuit and earth. insulation resistance: more than 100m ? at 500v dc. internal resistance for external eld indicator: 12 ? or less 0.1 x url span () 0.1 + 0.1 % of span performance speci cations reference conditions, silicone oil ? ll, 316ss isolating diaphragms, 4-20 ma analog output in linear mode. accuracy rating: (including linearity, hysteresis, and re- peatability) (standard) for spans greater than 1 /10 of url: 0.2% of span for spans below 1 /10 of url: (option) (code: 21th digit h, k) for span greater than 1 /10 of url: 0.1% of span for span below 1 /10 of url: stability: 0.2% of upper range limit (url) for 10 years. temperature effect: effects per 28c change between the limits of ?40c and +85c time constant (at 23c) 0.55 s 0.3 s range code ?3? ?5? and ?6? dead time 0.12 s static pressure effect: zero shift: 0.2% of url / 1mpa span shift: ?0.2% of calibrated span / 1mpa overrange effect: zero shift; 0.1% of url for ? ange rating pressure supply voltage effect: less than 0.005% of calibrated span per 1v update rate: 60 msec step response: (without electrical damping) (standard) zero shift: total effect: (option) (code: 21th digit j, k) zero shift: 0.3% (x>1/4url) total effect: 0.4% (x>1/4url) 0.1 x url span () 0.05 + 0.05 % of span url x () 0.35 % url x () 0.5 % 0.25 x url x () 0.1 + 0.2 %(x<1/4url) 0.25 x url x () 0.2 + 0.2 %(x<1/4url) physical speci cations electrical connections: g 1 /2 , 1 /2 -14 npt, pg13.5, or m20 x 1.5 conduit, as speci? ed. process connections: lp side: 1 /4 -18 npt or rc 1 /4 . hp side: ansi, din, or jis raised face flange. see outline diagram for detailed dimensions. refer to ?code symbols? process-wetted parts material: non-wetted parts material: electronics housing: low copper die-cast aluminum alloy ? nished with polyester coat ing (standard), or 316 stainless steel (astm cf8m), as speci? ed. bolts and nuts: cr-mo alloy (standard) or 304 stainless steel fill ? uid: silicone oil (standard) or ? uori- nated oil mounting ? ange: 304 stainless steel or carbon steel, as speci? ed environmental protection: iec ip67 and nema 6 / 6p flange mounting: see drawings mass {weight}: transmitter approximately 10.2 to 19.2kg without options. add; 0.5kg for mounting bracket 4.5kg for stainless steel housing option 1.0kg per 50mm extension of diaphragm v j c d e h m t p r process cover 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) 316 stainless (* 1 ) diaphragm 316l stainless 316l stainless 316l stainless 316l stainless 316l stainless hastelloy-c monel tantalum 316l stainless 316l stainless material code (7th digit in ?code symbols?) lp side wetted sensor body 316 stainless 316 stainless 316 stainless 316 stainless 316 stainless hastelloy-c lining monel lining tantalum lining 316 stainless 316 stainless hp side diaphragm & ? ange face 316l stainless 316l stainless steel +au coating hastelloy-c monel tantalum hastelloy-c monel tantalum tantalum zirconium note: (* 1 ) scs14a per jis g 5121 (equivalent cf8m per astm a351/a351m) remark: sensor o-rings: viton o-ring and te? on gasket select- able.
4 fke ... 5 optional features indicator: a plug-in analog indicator (2.5% accu- racy). an optional 5-digit lcd meter with engi- neering unit is also available. local con gurator with lcd display: an optional 5 digits lcd meter with 3 push buttons can support items as using communication with fxw. arrester: a built-in arrester protects the electronics from lightning surges. lightning surge immunity: 4kv (1.2 50s) oxygen service: special cleaning procedures are followed throughout the process to maintain all process wetted parts oil-free. the ? ll ? uid is ? uorinated oil. chlorine service: oil-free procedures as above. includes ? uorinated oil for ? ll. degreasing: process-wetted parts are cleaned, but the ? ll ? uid is standard silicone oil. not for use on oxygen or chlorine measure- ment. vacuum service: special silicone oil and ? lling procedure are applied. see fig.1 and fig.2 optional tag plate: an extra stainless steel tag with customer tag data is wired to the transmitter. coating of cell: cell?s surface is ? nished with epoxy/poly- urethane double coating. specify if environment is extremely cor- rosive. fig. 1 r elation between process temperature and operating pressure fig. 2 relation between process temperature and operating pressure silicone (code y,g) silicone (code s) operating area silicone (code t) 101 {1010} 53.3 {533} 13.3 {133} 2.7 {27} [kpa abs] {mbar abs} operating pressure C40 C15 60 20 85 120 200 230 250 300 process temperature[c ] operating area non-operating area 101 {1010} 0.13 {1.3} [kpa abs] {mbar abs} operating pressure C15 150 process temperature[c ] sealing liquid:silicone (code k)
5 accessories oval anges: (model ffp, refer to data sheet no. eds6- 128) converts process connection to 1 /2 -14 npt or to rc 1 /2 ; in carbon steel or in 316 stainless steel. hand held communicator: (model fxw, refer to data sheet no. eds 8-47) ordering information when ordering this instrument, specify: 1. code symbols 2. measuring range 3. output orientation (burnout direction) when abnormality is occurred in the transmitter. hold / overscale / underscale. unless otherwise speci? ed, output hold function is sup- plied. 4. indication method (indicated value and unit) in case of the actual scale (code d, h, p, s, 2, 5 on 9th digit). 5. tag no. (up to 14 alphanumerical characters), if re- quired.
6 fke ... 5 5 6 7 8 9 s t v w x hp side lp side 0 1 2 3 4 5 6 7 8 9 m r a b c d e f g h j k s t u v w x 3 5 6 v c d e j h m t p r diaphragm 316l stainless steel 316l stainless steel 316l stainless steel 316l stainless steel 316l stainless steel hastelloy-c monel tantalum 316l stainless steel 316l stainless steel diaphragm and flange face 316l stainless steel hastelloy-c monel tantalum diaphram: 316l stainless steel +au coating flange face: 316 stainless steel hastelloy-c monel tantalum titanium zirconium wetted sensor body 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel hastelloy-c lining monel lining tantalum lining 316 stainless steel 316 stainless steel rc1/4 7/16-20unf g1/2 t type 1/4-18npt 7/16-20unf 1/2-14npt t type 1/4-18npt m10 pg 13.5 t type 1/4-18npt m10 m201.5 t type 1/4-18npt 7/16-20unf pg 13.5 t type rc1/4 7/16-20unf g1/2 l type 1/4-18npt 7/16-20unf 1/2-14npt l type 1/4-18npt m10 pg 13.5 l type 1/4-18npt m10 m201.5 l type 1/4-18npt 7/16-20unf pg 13.5 l type material size and rating 304 stainless jis 10k 80a steel jis 10k 100a jis 30k 80a jis 30k 100a ansi/jpi 150lb 3" ansi/jpi 150lb 4" ansi/jpi 300lb 3" ansi/jpi 300lb 4" din pn40 dn80 din pn16 dn100 jis 20k 80a ansi/jpi 600lb 3b carbon steel jis 10k 80a jis 10k 100a jis 30k 80a jis 30k 100a ansi/jpi 150lb 3" ansi/jpi 150lb 4" ansi/jpi 300lb 3" ansi/jpi 300lb 4" din pn40 dn80 din pn16 dn100 316 stainless jis 10k 80a steel ansi/jpi 150lb 3b ansi/jpi 150lb 4b ansi/jpi 300lb 3b ansi/jpi 300lb 4b ansi/jpi 600lb 3b 0.32 32 {3.2 320} 1.3 130 {13 1300} 5 500 {50 5000} (*2) process cover 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel 316 stainless steel description note 1 note 2 note 3 note 3 digit 4 5 6 7 4567 123 f5 ke 89 10 11 12 13 14 15 21 digit no. of code note note 1: (*1) 100: 1 turn down is possible, but should be used at a span greater than 1 /40 of the maximum span for better performance. note 2: (*2) not available for 7th digit code "r". note 3: (*3) 5th digit code "0, 2, 4, 6, 8, a, c, e, g, j" are available. code symbols
7 none (for ordinary locations) tiis, flameproof (cable gland seal) (*8) tiis, intrinsic safety fm, flameproof (or explosionproof) (*11) fm, intrinsic safety and nonincentive fm combined of flameproof and intrinsic safety (*11) atex flameproof (*10) atex intrinsic safety atex type n atex combined of flameproof and intrinsic safety (*10) iecex scheme, flameproof (*10) iecex scheme, intrinsic safety csa, flameproof (or explosionproof) (*11) csa, intrinsic safety and nonincentive nepsi, flameproof (or exprosionproof) nepsi, intrinsic safety nepsi, combined of flameproof and intrinsic safety extension [mm] applicable material code 0 any 50 100 150 200 extra ss tag plate stainless steel elec. housing coating of cell none none none yes none none none (*4) none yes yes none yes none yes yes yes yes yes treatment fill fluid standard silicone oil standard fluorinated oil degreasing silicone oil oxygen service fluorinated oil (7th digit code "v","j" only) chlorine service fluorinated oil (7th digit code "h", "t", "b", "u", "c" and "e") high temp. 250c high temp. 300c high temp. and vacuum (250c) high temp. and vacuum (300c) high temp. and high vacuum silicone oil teflon (gasket) teflon (gasket) and teflon membrance 5th digit code "0", "2", "4", "6", "8", "a", "c", "e", "g", "j", "m", "r", "s", "t", "v", "x" and 11th digit code "y" are available. 13th digit code "h", "j", "s", "t", "k" are not available. 7th digit code "v", "j" are available. description note note 8 note 11 note 11 note 10 note 10 note 10 note 11 note 4 note 7 note 7 note 5 digit 10 11 12 13 14 4567 123 f5 ke 89 10 11 12 13 14 15 21 digit no. of code a c g d h v x k p m r t e j f s u y b m n p q y a b c d y w g a d h j s t k b d (7th digit code "v" only) 7th digit code "v" 7th digit code "v", "c", "h", "b" (* 5) note 4: (*4) customer tag number can be engraved on standard stainless steel name plate. if extra tag plate is required, select "yes" note 5: (*5) treatment; standard note 7: (*7) not avilable for 10th digit code "c". indicator arrester none none analog, 0 to 100% linear scale none analog, custom scale none none yes analog, 0 to 100% linear scale yes analog, custom scale yes digital, 0 to 100% linear scale none digital, custom scale none digital, 0 to 100% linear scale yes digital, custom scale yes digital, 0 to 100% linear scale (local configurator unit with lcd display) none digital, custom scale (local configurator unit with lcd display) none digital, 0 to 100% linear scale (local configurator unit with lcd display) yes digital, custom scale (local configurator unit with lcd display) yes 9 a b d e f h l p q s 1 2 4 5 (*7) note 8: (*8) available for 4th digit code "s". note 10: (*10) available for 4th digit code "6", "8", "t", "w". note 11: (*11) available for 4th digit code "6", "t".
8 fke ... 5 (* 12) cr-mo alloy hexagon socket head cap screw/carbon steel nut cr-mo alloy hexagon bolt/carbon steel nut 304 stainless steel bolt /304 stainless steel nut 316 stainless steel bolt /316 stainless steel nut (* 6) high accuracy type instruction manual attached low temperature effect type instruction manual attached h+j instruction manual attached opposite vent/drain plug position instruction manual attached instruction manual unattached high accuracy type instruction manual unattached low temperature effect type instruction manual unattached t+u instruction manual unattached opposite vent/drain plug position instruction manual unattached description note note 12 note 6 digit 15 21 4567 123 f5 ke 89 10 11 12 13 14 15 21 digit no. of code a b e u note 6: (*6) if other option is not necessary, 21st digit code is blank. in case of 21st digit code is blank, instruction manual attached. note 12: (*12) if case of tropical use, select stainless bolts and nuts. h j k c l t u v p
9 dpoevjudpoo 1sftt$poo ( 0wbmqbohftdsfx 6/' 4$3&8%&15) 4 ) %& ' uiejhjupguif dpeftzncpmt : ? uiejhjupguif dpeftzncpmt ."44"11309 lh
-? - - 3d /15 6/' 4$3&8%&15) 5 /15 1h . 4$3&8%&15) 7 /15 . . 4$3&8%&15) 8 /15 1h 6/' 4$3&8%&15) 9 /15 " & ? - - - /05&
# ' ? $ ( ? % ) ? - +*4," +*4," +*4," "/4*-## "/4*-## +*4," +*4," "/4*-## "/4*-## % & u /i '-"/(& " 4 . $ # % & 5 ( 7 3 9 ' 6 ) 8 %*/1/%/ %*/1/%/ + , "/4*-## 1 uiejhjupguif dpeftzncpmt 4uboebse nbufsjbmt tqfdjgjdbujpo /05&
$pssptjpo sftjtubou nbufsjbmt tqfdjgjdbujpo /05&
( )? 5"#-& ' /05&
5)&13&4463&$0//&$503*4-0$"5&%0/5)&%08/4*%& 463'"$&0'5)&%&5&$503 8)&/5)&7&/5%3"*/1-6(*4 "55"$)&%0/5)&611&34*%&0'5)&%&5&$503 8)&/5)&45%*(*50'5)&$0%&4:.#0-4$ 1
/05&
8)&/5)&5)%*(*50'5)&$0%&4:.#0-4) . 5 /05&
*/$"4&0'5)$0%&?$? $"#-&*446*5#-& 07"-'-"/(&4$3&8 4&&5"#-& &"35)5&3.*/"- 4&&5"#-& 4&&5"#-& ) %&5"*-l"z 13&44$0//
% %&5"*-l#z $0/%6*5$0//
& ' )? ( ' & % -? u

'-"/(&'03)1 7&/5%3"*/1-6( 8*5)"/"-0(*/% 8*5)%*(*5"-*/% l#z$0/%6*5$0// ;&30"%+4$3&8 l"z13&44$0// */$"4&0'5)%*(*5$0%&l5z */$"4&0'5)%*(*5$0%&l4 7 8 9z #&/5%3"*/1-6( 8)&/5)&7&/5%3"*/1-6( "55"$)&%0/5)&611&34*%& 0'5)&%&5&$503
/05&
/)0-&4i%*" - -
- - -
-
( %&5"*-l$z *//&3%*"0' ("4,&5 /05&
*odbtfpguifuiejhjupguzqfdpefjt7 + /05&
*odbtfpguifuiejhjupguzqfdpefjt$ % & ) . 5 1 3 ( 015*0/1"354'03'-".&1300'0'5**4 +"1"/
uiejhjudpef$ $bcmfhmboeuzqf
/05&
$"#-&(-"/% $$0/%6*5$0// 445"(1-"5& $0//&$5*0/%*"(3". $, $, outline diagram (unit:mm)
10 fke ... 5 : ? uiejhjupguif dpeftzncpmt ."44"11309 lh
-? - - " & ? - - - /05&
# ' ? $ ( ? % ) ? - +*4," +*4," +*4," "/4*-## "/4*-## +*4," +*4," "/4*-## "/4*-## % & u /i '-"/(& " 4 . $ # % & 5 ( 7 3 9 ' 6 ) 8 %*/1/%/ %*/1/%/ + , "/4*-## 1 uiejhjupguif dpeftzncpmt ' ( )? dpoevjudpoo 1sftt$poo ( 0wbmqbohftdsfx 6/' 4$3&8%&15) ) %& ' uiejhjupguif dpeftzncpmt 3d /15 6/' 4$3&8%&15) /15 1h . 4$3&8%&15) /15 . . 4$3&8%&15) /15 1h 6/' 4$3&8%&15) /15 07"-'-"/(&4$3&8 4&&5"#-& &"35)5&3.*/"- 4&&5"#-& 4&&5"#-& ) %&5"*-l"z 13&44$0//
% %&5"*-l#z $0/%6*5$0//
& )? ( ' & % -? u '-"/(&'03)1 7&/5%3"*/1-6( l#z$0/%6*5$0// ;&30"%+4$3&8 l"z13&44$0// */$"4&0'5)%*(*5$0%&lz */$"4&0'5)%*(*5$0%&l z #&/5%3"*/1-6( 8)&/5)&7&/5%3"*/1-6( "55"$)&%0/5)&611&34*%& 0'5)&%&5&$503
y/05&
/)0-&4i%*" - -
- - -
-
/05&
5)&13&4463&$0//&$503*4-0$"5&%0/5)&%08/4*%& 463'"$&0'5)&%&5&$503 8)&/5)&7&/5%3"*/1-6(*4 "55"$)&%0/5)&611&34*%&0'5)&%&5&$503 8)&/5)&45%*(*50'5)&$0%&4:.#0-4$ 1
/05&
8)&/5)&5)%*(*50'5)&$0%&4:.#0-4) . 5 *//&3%*"0' ("4,&5

8*5)"/"-0(*/% 8*5)%*(*5"-*/% ' 4uboebse nbufsjbmt tqfdjgjdbujpo /05&
$pssptjpo sftjtubou nbufsjbmt tqfdjgjdbujpo /05&
/05&
*odbtfpguifuiejhjupguzqfdpefjt7 + /05&
*odbtfpguifuiejhjupguzqfdpefjt$ % & ) . 5 1 3 5"#-& 445"(1-"5& $0//&$5*0/%*"(3". $, $,
11 atex ex ii 1 g ex ia iic t5 tamb = C40c to +50c ex ia iic t4 tamb = C40c to +70c entity parameters: ui=28v, ii=94.3ma, pi=0.66w, ci=26nf (without arrester), li=0.6mh (without analog indicator), ci=36nf (with arrester), li=0.7mh (with analog indicator) factory mutual class i ii iii div.1 groups a, b, c, d, e, f, g t4 entity type 4x entity parameters: vmax=28v, imax=94.3ma, pi=0.66w, ci=35.98nf, li=0.694mh csa class i div.1 groups a, b, c, d class ii div.1 groups e, f, g class iii div.1 temp code t5 tamb max = +50c temp code t4 tamb max = +70c entity parameters: vmax=28v, imax=94.3ma, ci=25nf (without arrester), ci=36nf (with arrester), li=0.6mh (without analog meter), li=0.7mh (with analog meter) tiis ex ia iic t4 tamb max = +60c entity parameters: ui=28v, ii=94.3ma, pi=0.66w, ci=38.4nf, li=0.694mh iecex scheme ex ia iic t4 tamb = C40c to +70c ex ia iic t5 tamb = C40c to +50c entity parameters: ui=28v, ii=94.3ma, pi=0.66w, ci=26nf (without arrester), li=0.6mh (without analog indicator), ci=36nf (with arrester), li=0.7mh (with analog indicator) authorities intrinsic safety model code 9th digit 13th digit a,b,d y,g,h,j,s,t,k ?40c to +85c l,p,1,2 y,g,h,j,s,t,k ?20c to +80c q,s,4,5 y,g,h,j,s,t,k ?20c to +60c e,f,h y,g,h,j,s,t,k ?40c to +60c C w,a,d ?10c to +60c tamb model code 9th digit 13th digit a,b,d y,g,h,j,s,t,k ?40c to +85c l,p,1,2 y,g,h,j,s,t,k ?20c to +80c q,s,4,5 y,g,h,j,s,t,k ?20c to +60c e,f,h y,g,h,j,s,t,k ?40c to +60c ? w,a,d ?10c to +60c tamb nepsi ex ia iic t4 ex d iib+h 2 t6 / ex ia iic t4 entity parameters: ui=42.4v, ii=113ma, pi=1w, ci=35.98nf, li=0.694mh atex ex ii 3 gd eex nl iic t5 tamb = ?40c to +50c eex nl iic t4 tamb = ?40c to +70c specific parameters: model without arrester: ui=42.4v, ii=113ma, pi=1w, ci=25.18nf, li=0.694mh model with arrester: ui=32v, ii=113ma, pi=1w, ci=35.98nf, li=0.694mh eex nal iic t5 tamb = ?40c to +50c eex nal iic t4 tamb = ?40c to +70c specific parameters: model without arrester: umax=42.4v, imax=113ma, pmax=1w model with arrester: umax=32v, imax=113ma, pmax=1w factory mutual (pending) class i ii iii div.2 groups a, b, c, d, f, g t4 entity type 4x csa class i div.2 groups a, b, c, d class ii div.2 groups e, f, g class iii div.2 temp code t5 tamb max = +50c temp code t4 tamb max = +70c entity parameters: vmax=28v, ci=25.18nf (without arrester), ci=35.98nf (with arrester), li=0.694mh authorities type n nonincendive model code 9th digit 13th digit a,b,d y,g,h,j,s,t,k ?40c to +85c l,p,1,2 y,g,h,j,s,t,k ?20c to +80c q,s,4,5 y,g,h,j,s,t,k ?20c to +60c e,f,h y,g,h,j,s,t,k ?40c to +60c ? w,a,d ?10c to +60c tamb atex ex ii 2 gd ex d iic t6 ip66/67 t85c tamb = ?40c to +65c ex d iic t5 ip66/67 t100c tamb = ?40c to +85c factory mutual class i div.1 groups b, c, d t6 type 4x class ii iii div.1 groups e, f, g t6 type 4x tamb max = +60c csa class i div.1 groups c, d class ii div.1 groups e, f, g class iii div.1 note) seal not required enclosure is allowed. tiis ex do iib+h 2 t4 tamb max = +60c maximum process temp. = +120c iecex scheme ex d iic t5 ip66/67 tamb = ?40c to +85c ex d iic t6 ip66/67 tamb = ?40c to +65c authorities flameproof nepsi ex d iib+h 2 t6 tamb = ?40c to +60c table 2
printed in japan caution on safety *before using this product, be sure to read its instruction manual in advance. international sales div sales group gate city ohsaki, east tower, 11-2, osaki 1-chome, shinagawa-ku, tokyo 141-0032, japan http://www.fujielectric.com phone: 81-3-5435-7280, 7281 fax: 81-3-5435-7425 http://www.fjielectric.com/products/instruments/ information in this catalog is subject to change without notice. fke ... 5

▲Up To Search▲

Price & Availability of EDSX7-66H

	To Download EDSX7-66H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .