errata sheet, sae 81c90/91, e13, rev. 1.0 - 1 of 3 C microcontroller division errata sheet date / release 07.06.99 / 1.0 device: sae 81c90/91 stepping code / marking: e13 package: plcc-44/plcc-28 this errata sheet describes the deviations from the current user documentation. the classification and numbering system is module oriented in a continual ascending sequence over several derivatives, as well already solved deviations are included. so gaps inside this enumeration could occur. the current documentation is: data sheet: 01.97 preliminary note: devices marked with ees- or es are engineering samples which may not be completely tested in all functional and electrical characteristics, therefore they should be used for evaluation only. the specific test conditions for ees and es are documented in a separate status sheet. change summary to last errata sheet step d13 rel. 1.5: all known functional problems fixed new feature(s) for this step, up to now mentioned in the user's manual: none
errata sheet, sae 81c90/91, e13, rev. 1.0 - 2 of 3 C functional problems: none deviation from electrical- and timing specification: none history list (since last step d13) functional problems functional problem short description fixed sfcan.1 message object priority problem step e13 sfcan.2 bus-off problem step e13 sfcan.3 tcec problem step e13 sfcan.4 v2.0b compatibility problem step e13 sfcan.5 bsp instability problem step e13 sfcan.6 stuff error problem step e13 sfcan.7 crc error problem step e13 sfcan.8 acknowledge error counting problem step e13 sfcan.9 crc calculation problem step e13 sfcan.10 serial interface problem step e13 sfcan.11 error delimiter length problem step e13 sfcan.12 hard synchronization problem step e13 sfcan.13 bit stuffing calculation problem step e13 sfcan.14 monitor mode problem step e13 sfcan.15 extended frame problem step e13 sfcan.16 hard / soft software reset problem step e13 ac/dc deviations none application support group, munich
errata sheet, sae 81c90/91, e13, rev. 1.0 - 3 of 3 C
|
