original creation date: 10/20/98 last update date: 11/12/98 last major revision date: 10/20/98 cn54f151a-x rev 0a0 microcircuit data sheet 8-input multiplexer general description the f151a is a high-speed 8-input digital multiplexer. it provides in one package the ability to select one line of data from up to eight sources. the f151a can be used as a universal function generator to generate any logic function of four variables. both assertion and negation outputs are provided. ns part numbers 54F151ADC industry part number 54f151a prime die m151a processing (blank) quality conformance inspection (blank) subgrp description temp ( c) o 1 static tests at +25 2 static tests at +70 3 static tests at 0 4 dynamic tests at +25 5 dynamic tests at +70 6 dynamic tests at 0 7 functional tests at +25 8a functional tests at +70 8b functional tests at 0 9 switching tests at +25 10 switching tests at +70 11 switching tests at 0 1
microcircuit data sheet cn54f151a-x rev 0a0 (absolute maximum ratings) (note 1) storage temperature -65 c to +150 c ambient temperature under bias -55 c to +125 c junction temperature under bias -55 c to +175 c vcc pin potential to ground pin -0.5v to +7.0v input voltage (note 2) -0.5v to +7.0v input current (note 2) -30 ma to +5.0ma voltage applied to output in high state (with vcc=0v) -0.5v to vcc standard output -0.5v to +5.5v tri-state output current applied to output in low state (max) twice the rated iol(ma) note 1: absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. functional operation under these conditions is not implied. note 2: either voltage limit or current limit is sufficient to protect inputs. recommended operating conditions free air ambient temperature 0 c to +70 c supply voltage +4.5v to +5.5v 2
cn54f151a-x rev 0a0 microcircuit data sheet electrical characteristics dc parameter (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp range: 0c to +70c symbol parameter conditions notes pin- name min max unit sub- groups iih input high current vcc=5.5v, vm=2.7v, vinh=5.5v, vinl=0.0v 1, 2 inputs 5.0 ua 1, 2, 3 ibvi input high current vcc=5.5v, vm=7.0v, vinh=5.5v, vinl=0.0v 1, 2 inputs 7.0 ua 1, 2, 3 iil input low current vcc=5.5v, vm=0.5v, vinl=0.0v, vinh=5.5v 1, 2 inputs -0.6 ma 1, 2, 3 vol output low voltage vcc=4.5v, vil=0.8v, vih=2.0v, iol=20ma, vinl=0.0v 1, 2 outputs 0.5 v 1, 2, 3 voh output high voltage vcc=4.5v, vil=0.8v, vinh=5.5v, vih=2.0v, ioh=-1.0ma, vinl=0.0v 1, 2 outputs 2.5 v 1, 2, 3 vcc=4.75v, vil=0.8v, vinh=5.5v, vih=2.0v, ioh=-1.0ma, vinl=0.0v 1, 2 outputs 2.7 v 1, 2, 3 ios short circuit current vcc=5.5v, vinh=5.5v, vinl=0.0v, vm=0.0v 1, 2 outputs -60 -150 ma 1, 2, 3 vcd input clamp diode voltage vcc=4.5v, im=-18ma, vinh=5.5v 1, 2 inputs -1.2 v 1, 2, 3 vid input leakage test vcc=0v, iid=1.9ua, all other pins grounded 1, 2 inputs 4.75 v 1, 2, 3 iod output leakage circuit current vcc=0v, viod=150mv, all other pins grounded 1, 2 outputs 4.75 ua 1, 2, 3 vih input high voltage recognized as a high signal 4 inputs 2.0 v 1, 2, 3 vil input low voltage recognized as a low signal 4 inputs 0.8 v 1, 2, 3 icc supply current vcc=5.5v, vinh=5.5v 1, 2 vcc 21 ma 1, 2, 3 icex output high leakage current vcc=5.5v, vinh=5.5v, vinl=0.0v, vm=5.5v 1, 2 outputs 100 ua 1, 2, 3 3
cn54f151a-x rev 0a0 microcircuit data sheet electrical characteristics ac parameter (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns symbol parameter conditions notes pin- name min max unit sub- groups tplh(1) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 in to z 3.0 6.5 ns 9 1, 2 in to z 2.5 7.5 ns 10, 11 tphl(1) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 in to z 3.7 7.0 ns 9 1, 2 in to z 3.7 7.5 ns 10, 11 tplh(2) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 in to z 3.0 6.5 ns 9 1, 2 in to z 3.0 7.0 ns 10, 11 tphl(2) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 in to z 1.5 4.0 ns 9 1, 2 in to z 1.5 5.0 ns 10, 11 tplh(3) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 sn to z 4.5 10.5 ns 9 1, 2 sn to z 4.5 12.0 ns 10, 11 tphl(3) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 sn to z 4.0 9.0 ns 9 1, 2 sn to z 4.0 9.0 ns 10, 11 tplh(4) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 sn to z 4.0 9.0 ns 9 1, 2 sn to z 3.5 9.5 ns 10, 11 tphl(4) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 sn to z 3.2 7.5 ns 9 1, 2 sn to z 3.2 7.5 ns 10, 11 tplh(5) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 e to z 5.0 9.5 ns 9 1, 2 e to z 4.0 10.5 ns 10, 11 tphl(5) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 e to z 3.5 7.0 ns 9 1, 2 e to z 3.0 7.5 ns 10, 11 tplh(6) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 e to z 3.0 6.1 ns 9 1, 2 e to z 3.0 7.0 ns 10, 11 tphl(6) propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @ 0c/ +70c 1, 2 e to z 3.0 6.0 ns 9 1, 2 e to z 2.5 6.0 ns 10, 11 note 1: screen tested 100% on each device at +75c temperature only, subgroups 2, 8a & 10. note 2: sample tested (method 5005, table 1) on each mfg. lot at +75c temperature only, subgroups 2, 8a & 10. note 3: guaranteed, but not tested. note 4: guaranteed by applying specific input condition and testing vol & voh. 4
microcircuit data sheet cn54f151a-x rev 0a0 revision history rev ecn # rel date originator changes 0a0 m0003055 11/12/98 donald b. miller initial mds release 5
|
