axx-52 www.axtal.com wasemweg 5 page 1(2) fon: +49 (6261) 939834 d-74821 mosbach fax: +49 (6261) 929836 germany e-mail: info@axtal.com gmbh & co. kg specification AXX52 issue: 01 date: 2005-01-15 oscillator type : quartz crystal unit hc-52/u / um-1 parameter min. typ. max. unit condition frequency range 6 160 mhz crystal cut at mode 1 3 5 6 ~ 50 30 ~ 120 75 ~ 160 mhz mhz mhz fundamental mode 3 rd overtone 5 th overtone load capacitance c l 5 ~ 100 pf or series pf see ordering code adjustment tolerance 5 ~ 50 ppm see ordering code frequency stability frequency stability over temperature range 3 ~ 50 ppm see table 1 operating temperature range (steady st ate) -40 +105 c see table 1 long term (aging) 2 ppm per year resonance resistance r r max ? see table 2 motional capacitance c 1 ff static capacitance c 0 5 pf drive level 0,01 100 1000 w insulation resistance 500 m ? 100 v dc storage temperature range -45 +105 c enclosure (see drawing) hc-52/u (um-1) iec 60122-3, type eb, ek, and ss-l3 (smd) can height max. 8,0 mm flange width max. 3,2 mm. smd configuration optional see ordering code marking frequency (mhz) AXX52 wwaxyy side 1 date code & mfg code packing bulk / tape & reel t&r on request notes: 1. terminology and test conditions are according to iec standard iec60122-1, unless otherwise stated 2. measurement technique according to iec 60444-5 or equivalent 3. table 1: frequency stability over temperature ppm 3 5 7 10 15 20 30 50 c code 1 2 3 4 5 6 7 8 -10 ~ + 60 a -20 ~ + 60 b 0 ~ + 70 c -10 ~ + 70 d -20 ~ + 70 e -30 ~ + 60 f -20 ~ + 85 g -30 ~ + 70 h 0 ~ + 85 i -40 ~ + 85 j -40 ~ + 90 k -40 ~ + 105 l table 2: resistance rr frequency [mhz] mode rrmax [ ?] 6 ~ 9.999 1 40 10 ~ 50 1 25 30 ~ 120 3 rd 40 75 ~160 5 th 60
axx-52 www.axtal.com wasemweg 5 page 2(2) fon: +49 (6261) 939834 d-74821 mosbach fax: +49 (6261) 929836 germany e-mail: info@axtal.com gmbh & co. kg test iec 60068 part ... iec 61178-1 clause ... test conditions visual inspection, dimensions 4.5 4.6 enclosure styles as in iec 60122-3, if applicable sealing tests 2-17 4.8.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 4.8.3 test ta (235 5)c method 1 test tb method 1a, 5s shock 2-27 4.8.8 test ea, 3 x per axes 100g, 6 ms half-sine pulse bump 2-29 4.8.6 test eb, 4000 bumps per axes, 40g, 6 ms free fall 2-32 4.8.9 test ed procedure 1, 2 drops from 1m height vibration, sinusoidal 2-6 4.8.7 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 1 khz, 10g rapid change of temperature 2-14 4.8.5 test na, 10 cycles at extremes of operating temperature range dry heat 2-2 4.8.11 test ba, 16 h at upper temperature indicated by climatic category damp heat, cyclic 2-30 4.8.12 test db variant 1 severity b), 55c/95% r.h., 6 cycles cold 2-1 4.8.13 test aa, 2 h at lower temperature indicated by climatic category climatic sequence 1-7 4.8.14 sequence of 4.8.11, 4.8.12 (1 st cycle), 4.8.13, 4.8.12 (5 cycles) damp heat, steady state 2-3 4.8.15 test ca, 56 days endurance tests - ageing - extended aging 4.9.1 4.9.2 30 days @ 85c 1000h, 2000h, 8000h @85c ordering code: type frequency load capacitance mode adjustment tolerance freq. stability over temperature package option packing [mhz] sr: series 18: 18 pf 1:fund 3, 5: ot [ppm] code :table 1 j: jacket/clip 3: 3 rd lead b: bulk t&r: tape& reel AXX52 35.328 18 1 10 a3 j t&r enclosure drawings hc-52/u (um-1) um-1 3 rd lead um-1 jacket/clip environmental conditions
|
