advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 MA4EX580L-1225T silicon double balanced hmic mixer 4.7 - 6.0 ghz m/a-com products rev. v1 features ? 7.6 db typical conversion loss ? +3 to +7 dbm lo drive ? hmic ? patented process ? silicon low barrier schottky diodes ? dc - 1050 mhz if bandwidth ? low cost miniature plastic package description and applications m/a-com?s MA4EX580L-1225T is a silicon mono- lithic 4.7 to 6.0 ghz double balanced mixer in a low cost miniature surface mount sot-25 package. the die uses m/a-com?s unique hmic tm silicon/glass process to achieve low loss passive elements while retaining the advantages of low barrier silicon schottky diodes. these mixers are well suited for high volume wireless and cellular applications where small size and repeatability are required. typical applications include frequency conversion, modulation, and demodulation in wireless receivers and transmitters. package outline (topview) 3 2 1 4 5 pin configuration pin function pin function 1 rf 4 gnd 2 gnd 5 if 3 lo schematic lo if rf ordering information standard part number package MA4EX580L-1225T tape and reel absolute maximum ratings 1 parameter maximum ratings operating temperature -40 c to +85 c storage temperature -65 c to +150 c incident lo power +20 dbm incident rf power +20 dbm 1. exceeding these limits may cause permanent damage. 2. refer to application note m538 for surface mounting instructions.
advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 MA4EX580L-1225T silicon double balanced hmic mixer 4.7 - 6.0 ghz m/a-com products rev. v1 * specifications subject to change without notice. parameter frequency range test conditions units typ. max. conversion loss 4700 mhz 4.7?6.0 ghz lo drive = +3 -> +7 dbm rf = -10 dbm, if = 60 mhz db db 7.6 8.5 8.0 9.5 l - r isolation 4700 mhz 4.7?6.0 ghz lo drive = +5 dbm rf level = -10 dbm db db 23.0 20.0 l - i isolation 4700 mhz 4.7?6.0 ghz lo drive = +5 dbm rf level = -10 dbm db db 22.0 20.0 r - i isolation 4700 mhz 4.7?6.0 ghz lo drive = +5 dbm rf level = -10 dbm db db 9.4 7.5 lo vswr 4700 mhz 4.7?6.0 ghz lo drive = +5 dbm rf level = -10 dbm 2.7 2.8 - - rf vswr 4700 mhz 4.7?6.0 ghz lo drive = +5 dbm rf level = -10 dbm 2.3 3.1 - - if vswr dc - 1050 mhz lo drive = +5 dbm rf level = -10 dbm 1.1 - input ip3 4700 mhz 4.7?6.0 ghz lo drive = +3 -> +7 dbm rf = -10 dbm, if = 60 mhz dbm dbm 7.5 8.1 input 1 db compression 4700 mhz 4.7?6.0 ghz lo drive = +3 -> +7 dbm rf = -10 dbm, if = 60 mhz dbm dbm +1.6 +1.5 - - if 1 db bandwidth dc - 1050 mhz lo = 4650 mhz @+5dbm mhz 1050 - electrical specificat ions @ +25 c typical performance curves
advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 MA4EX580L-1225T silicon double balanced hmic mixer 4.7 - 6.0 ghz m/a-com products rev. v1 sot-25 dimensions case style - sot-25 dim inches millimeters min. max. min. max. a .106 .122 2.70 3.10 b .100 .118 2.54 3.00 c ? .051 ? 1.30 d .063 ref. 1.60 ref. e .032 .043 .80 1.10 f .014 .020 .35 .50 g .003 ? .08 ? h .000 .006 .00 .15 j .018 ref. .45 ref. 2. leads coplanarity should be 0.003 (0.08) max.
|
