e l e c t r o n i c s i n c . 10base-t interface module tel: (818) 892-0761 fax: (818) 894-5791 http://www.pca.com pca electronics, inc. 16799 schoenborn st. north hills, ca 91343 ? general purpose 10base-t filter module ? complies with or exceeds ieee 802.3, 10base-t standards ? add ?rc?after part number for rohs compliant ? available in smd and dip packages epa2013d & epa2013d-rc product performance is limited to specified parameters. data is subject to change without prior notice. electrical parameters @ 25?c unless otherwise specified dimensions are in inches /mm ?.010 /.25 csa2013d & -rc rev. g4 6/26/07 jdg ? isolation : meets or exceeds 802.3 ieee requirements ? characteristic filter impedance : 100 w ? referenced to the output level fundamental frequency @ 5 mhz ? cmc is common to both channels common mode rejection (db min.) insertion loss (db max.) 1-10 mhz -1/-1 xmit/rcv return loss (db min.) 5-10 mhz -15/-15 xmit/rcv @ 25 mhz -19/-14 xmit/rcv @ 100 mhz xmit -25 @ 30 mhz -30/-20 xmit/rcv cut-off frequency (mhz) ?1.0 mhz 17/17 xmit/rcv @ 50 mhz xmit -30 crosstalk (db min.) -30/-30 1-10 mhz xmit/rcv attenuation (db min.) @ 20 mhz -7/-6 xmit/rcv @ 40 mhz -35/-31 xmit/rcv schematic transmit channel 14 15 16 3 1 lpf 2 1:1 receive channel 9 10 11 8 6 lpf 7 1:1 notes : 1. lead finish 2. peak temperature rating (wave solder process only) (per jesd22a111) 3. weight 4. packaging information (tube) epa2013d-rc 260? 10 (+2/-0) seconds 2.8 grams 19 pieces/tube epa2013d 225? 2.8 grams 19 pieces/tube snpb hot tin dip (sn) ? ? lead material : matte tin with ni barrier package .310 (7.87) pin 1 i.d. .125/.150 (3.18/3.81) .100 (2.54) .008/.012 (.203/.305) pca epa2013d(-rc) date code .145 (3.68) .300 (7.62) .990 (25.15) .020/.030 (.508/.762) .300 (7.62) .018/.022 (.457/.599) .700 (17.78) .270 (6.86) .300 (7.62) .700 (17.78) component outline .390 x .990 (10.13 x 25.15) suggested pcb layout .300 (7.62) .034 (.864) drill .060 (1.52) solder pad
|
