document number 34034 revision 02-nov-01 www.vishay.com 15 im-6-rfcs-40 vishay dale for technical questions, contact magnetics@vishay .com inductors commercial, molded features classification is grade 1, class b. inductance range is .10 h to 1000 h. proven reliability molded inductors. *model electricals and tolerances shown. standard electrical specifications model* ind. ( h) tol. q min . test freq. (mhz) srf min. (mhz) dcr max. (ohms) rated dc current (ma) phenolic core iron core IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 IM-6RFCS-40 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 75 75 75 75 75 70 70 65 60 55 55 50 50 45 45 45 45 55 55 60 70 65 65 60 60 65 80 75 75 75 85 80 80 75 75 75 75 65 65 65 65 65 65 65 65 65 65 65 65 65 60 60 60 60 60 60 50 50 50 50 50 45 40 40 25 25 25 25 20 20 15 15 15 10 10 10 7.9 7.9 7.9 7.9 5 5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 400 400 400 400 400 376 352 320 288 264 240 220 200 176 160 144 132 88 80 76 72 64 56 52 48 42 38 34 32 29 26 21 18 15 13 10 8 5.7 5.4 5.0 4.7 4.5 4.2 4.0 3.8 3.6 3.4 3.2 3.0 2.9 2.8 2.7 2.6 2.5 2.4 2.2 0.02 0.025 0.03 0.03 0.03 0.04 0.05 0.08 0.08 0.10 0.12 0.18 0.24 0.35 0.43 0.65 0.80 0.12 0.15 0.23 0.30 0.45 0.55 0.65 0.73 1.1 1.4 1.6 1.8 2.7 3.5 3.8 4.0 4.4 4.7 5.3 6.0 5.0 5.8 6.6 7.4 8.0 8.6 8.9 9.6 9.9 10.4 10.9 11.6 11.8 12.5 13.5 14.0 15.0 15.5 16.5 4000 3500 3000 3000 3000 2700 2500 2000 2000 1700 1500 1300 1100 1000 850 720 610 1600 1400 1200 1000 900 800 720 650 590 500 460 430 360 300 290 275 265 250 235 220 170 164 158 155 150 145 142 137 135 131 128 124 123 120 115 113 110 107 104 electrical specifications inductance tolerance: 10% on q-meter for 0.10 h to 22 h. 5% 1000 cps bridge for 27 h to 100 h. 5% on q-meter for 120 h to 1000 h. note: l and q are not always tested at the same frequency. inductance values that are tested on q-meter, are tested at standard test frequencies. dielectric strength: 700v rms at sea level. operating temperature: - 55 c to + 125 c. self-resonant frequency: minimum srf measured with full length leads on grid-dip meter. q: measured on q-meter. mechanical specifications terminal strength: meets 5 pound pull test per mil-c-15305 (latest revision). density specifications weight: .9 gram maximum. environmental specifications moisture and shock resistance: meets requirements of mil-c-15305, grade 1, class b. vibration: high frequency, 10hz to 2000hz @ 20 g 10% maximum for 12 logarithmic swings, each of 20 minute duration repeated for each of three mutually perpendicular planes. dimensions in inches [millimeters] 1.30 [33.02] typ. min. #22 .025 .002 [.635 .051] tcw .178 .010 [4.52 .254] .430 .010 [10.92 .254] marking color coded per mil-c-15305 (latest revision) IM-6RFCS-40 model 10% inductance tolerance 10 h inductance value ordering information
|
