1/97 n/al. 8.240. 300.01 b64g our policy is one of continuous research and development. we reserve the right to amend, without notice, the specifications given in this document. ordering information see ordering information on the following pages. iso symbols automatic drain relieving manual drain relieving olympian plus filter/regulator 1/4 " , 3/8 ", 1/2 " , 3/4 " port sizes l olympian plus plug in design l high efficiency water and particle removal l quick release bayonet bowl l high visibility prismatic sight glass* l push to lock adjusting knob with tamper resistant option * uk and other patents pending technical data fluid: compressed air maximum pressure: guarded transparent bowl: 10 bar (145 psig) metal bowl: 17 bar (250 psig) operating temperature*: guarded transparent bowl: -20 to +50? (0 to +125?) metal bowl: -20 to +80? (0 to +175?) * air supply must be dry enough to avoid ice formation at temperatures below 2? (35?). partical removal: 5, 25 or 40 ?. within iso 8573-1, class 3 and class 5 typical flow at 6,3 bar (90 psig) inlet pressure?: 110 dm 3 /s (233 scfm) automatic drain connection: iso g1/8 automatic drain operating conditions: drain closes when bowl pressure exceeds 0,7 bar (10 psig) and opens when bowl pressure drops below 0,07 bar (1 psig). gauge ports: iso rc 1/8 nominal bowl size: 0,2 litre (7 ounce) materials: body: zinc bonnet: aluminium valve: brass yoke: zinc metal bowl: aluminium standard metal bowl prismatic liquid level indicator lens: grilamid optional metal bowl sight glass: pyrex optional transparent bowl: polycarbonate element: sintered plastic elastomers: synthetic rubber automatic drain non-relieving manual drain non-relieving
n/al. 8.240. 300.0 2 1/97 t ypical p erf ormance characteristics b64g our policy is one of continuous research and development. we reserve the right to amend, without notice, the specifications given in this document. flow characteristics 0 20 40 60 80 100 dm 3 /s air flow 0 40 80 120 160 200 240 scfm 8 6 4 2 0 outlet pressure bar g 100 80 60 40 20 0 psig port size: 1/2 " 40 m element inlet pressure: 10 bar (145 psig) range: 0,3 to 10 bar (5 to 145 psig) or dering inf ormation. models listed include iso g threads, knob adjustment, automatic drain, metal bowl, 40 m element, relieving diaphragm and 0,3 to 10 bar (5 to 145 psig) outlet pressure adjustment range* without gauge. ? typical flow with 10 bar (145 psig) inlet pressure, 6,3 bar (90 psig) set pressure and a 1 bar (15 psig) droop from set. port size model flow ? dm 3 /s (scfm) weight kg (lb) g1/4 b64g-2gk-ad3-rmn 30 (64) 1,71 (3.80) g3/8 b64g-3gk-ad3-rmn 76 (161) 1,69 (3.76) g1/2 b64g-4gk-ad3-rmn 106 (225) 1,66 (3.69) g3/4 b64g-6gk-ad3-rmn n.a. 2,02 (4.49) alternative models b 6 4 - g h h - h h h h port size substitute 1/4" 2 3/8" 3 1/2" 4 3/4" 6 threads substitute ptf a iso rc taper b iso g parallel g diaphragm substitute relieving r non relieving n element substitute 5 m 1 25 m 2 40 m 3 adjustment substitute knob k t-bar t bowl substitute metal with liquid level indicator d guarded transparent p - h h h drain substitute 1/4 turn manual m automatic a gauge substitute with g without n outlet pressure adjustment range* substitute 0,3 to 4 bar (5 to 60 psig) f 0,3 to 10 bar (5 to 145 psig) m 2 to 17 bar (29 to 250 psig) s** * outlet pressure can be adjusted to pressures in excess of, and less than, those specified. do not use these units to control pressures outside of the specified ranges. ** units with 17 bar (250 psig) adjustment range are available only with the t-bar adjustment; therefore substitute t at the 7th digit and s at the 12th position.
* reduces by 4 mm (0.16 " ) with knob in locked position. add 37 mm (1.46 ) for unit with ??handle ? minimum clearance required to remove bowl. ** 157 mm (6.18 ) for g3/4 models 1/97 n/al. 8.240. 300.0 3 b64g our policy is one of continuous research and development. we reserve the right to amend, without notice, the specifications given in this document. 105 (4.13)** 37 (1.46) 74 (2.91) 287 (11.3)* 303 (11.9)? 294 (11.6)* 310 (12.2)? 125 (2.92)* 125 (2.92)* accessories wall mounting bracket tamper resistant kit 50 mm pressure gauge r1/8 connection 1/8 ptf connection 74504-50 4355-50 6 bar (60 psig): 18-013-012 seal wire: 2117-01 10 bar (150 psig): 18-013-013 18-013-209 25 bar (360 psig): 18-013-014 18-013-210 b64g (automatic drain) b64g (manual drain) dimensions mm (inc hes) panel mounting hole diameter: 52 mm (2.06") panel thickness: 0 to 6 mm (0" to 0.25")
n/al. 8.240. 300.0 4 1/97 b64g our policy is one of continuous research and development. we reserve the right to amend, without notice, the specifications given in this document. w arning these products are intended for use in industrial compressed air systems only. do not use these products where pressures and temperatures can exceed those listed under ?echnical data . before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult norgren. through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. the system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. system designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. system designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. water vapor will pass through these units and will condense into liquid if air temperature drops in the downstream system. install an air dryer if water condensation could have a detrimental effect on the application. ser vice kits item type part number service kit relieving 4383-200 non relieving 4383-201 5 m 4338-01 replacement elements 25 m 4338-99 40 m 4338-02 replacement sight glass prismatic (standard) 4380-040 pyrex 4380-041 replacement drains automatic 3000-97 manual 684-84 service kit includes diaphragm assembly, valve assembly, valve spring, louvre o-ring, bowl o-ring, drain seal. 143 (5.63) 114 (4.49) 8,2 (0.32) 85 (3.35) 11 (0.43) 14,5 (0.57) 93 (3.66) 30,5 (1.20) 48 (1.89) 110 (4.33) brac ket mounting use 8 mm (5/16") screws to mount bracket to wall. brac ket kit ref erence item part number wall bracket 7 4504-50
|
