View 700FS-Y2DA40_2666915.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

electronic high performance timing relays product data (catalog number 700?fs) the bulletin 700?fs electronic high performance timing relays consist of multi?function, single function and special function designs. these products offer the customer optimum space utilization and maximum functionality. in addition, the timing ranges are easily adjusted, and the leds provide visual indication of the coil and timing status. ? 22.5mm (57/64 inch) wide ? dual voltage ? 24?48v dc 24?240v ac ? din rail mounting ? finger safe terminals ? single pull double throw (spdt) contact configuration ? multi?function/multi?range (on?delay, off?delay, on?and?off?delay, one shot, fleeting off?delay, flasher, on?delay pulse generator, pulse convertor, on?function, off?function, with 10 timing ranges) ? single function (on?delay, off? delay, on?and?off?delay, one shot, fleeting off?delay, flasher (pulse), flasher (pause), on?delay pulse generator, on?delay (pulse controlled), one shot/watch dog, pulse converter, with 12 timing ranges) ? special function/multi?range (flasher, true off?delay, star?delta, with 12 timing ranges) ? double pull double throw (dpdt) contact configuration ? multi?function/multi?range (on?delay, off?delay, on?and?off?delay, one shot, fleeting off?delay, flasher, on?delay pulse generator, pulse convertor, on?function, off?function, with 10 timing ranges) ? single function/multi?range (on?delay, off?delay, with 10 timing ranges)
2 700?fs electronic high performance timing relays catalog number explanation fs h u ? 700 u23 3 first position bulletin number second position type of relay third position function sixth position supply voltages fifth position time ranges fourth position assembly of contacts multi?function timing relays 700-fs m 3 u u23 function assembly of contacts time ranges supply voltages m multi-function timing relays 8 single-functions: a, b, c, d, e, f, i, & l. on and off function additional (for installation and maintenance) 3 1 change- over contact 1 c/o (spdt) 4 2 change- over contacts 2 c/o (dpdt) u 0.05 s...60 h z12 12 vdc u23 24...48 vdc 24...240 v 50/60 hz single function timing relays 700-fs a 3 a u23 function assembly of contacts time ranges supply voltages a on-delay b off-delay c on- and off-delay d one shot e fleeting off-delay f flasher (repeat cycle starts w/pulse) g flasher (repeat cycle starts w/pause) i on-delay pulse generator j on-delay (pulse controlled) k one shot / watch dog (pulse controlled) l pulse converter all functions: 3 1 change- over contact 1 c/o (spdt) functions a and b: 4 2 change- over contacts 2 c/o (dpdt) a 0.05...1 s b 0.15...3 s c 0.5...10 s d 1.5...30 s e 0.05...1 min f 0.15...3 min g 0.5...10 min h 1.5...30 min i 0.05...1 h j 0.15...3 h k 0.5...10 h l 3.0...60 h u 0.05 s...60 h z12 12 vdc u23 24...48 vdc 24...240 v 50/60 hz note: only the 700?fsa and 700?fsb are available with the ?u? multi?time setting ranges (0.05s to 60h). special function timing relays 700-fs h 3 u u23 function assembly of contacts time ranges supply voltages h flasher (repeat cycle starting with pulse or pause) 3 1 change- over contact 1 c/o (spdt) u 0.05 s...60 h v 0.05 s ... 60 h (2 ranges) z12 12 vdc u23 24...48 vdc 24...240 v 50/60 hz 700-fs q 3 q u18 function assembly of contacts time ranges supply voltages q off-delay without supply voltages (true off?delay) 3 1 change-over contact 1 c/o (spdt) 4 2 change-over contact 2 c/o (dpdt) q 0.15 s ... 10 min u18 24...240 vdc 24...240 v 50/60 hz 700-fs y 2 c u23 function assembly of contacts time ranges supply voltages y star-delta timing relays 2 2 normally open contacts 2 n.o. c 0.5...10 s d 1.5...30 s e 0.05...1 min f 0.15...3 min g 0.5...10 min u23 24...48 vdc 24...240 v 50/60 hz
3 700 ? fs electronic high performance timing relays technical data 700 ? fsm multi ? function high performance timing relays description spdt dpdt multi-function timing relays 700-fsm3u includes 10 setting functions: (a) - on-delay (b) - off-delay (c) - on- and off-delay (d) - one shot (e) - fleeting off-delay (f) - flasher (repeat cycle starts w/pulse) (i) - on-delay pulse generator (l) - pulse converter (on) - on-function * (off) - off-function * * (for installation and maintenance) up down ? ? 700 ? fs single function high performance timing relays description spdt dpdt supply voltages (a1/a2) z12 12 vdc u23 24...48 vdc 24...240 vac, 50/60 hz 0 0.2 0.4 0.6 0.8 1.0 22.5 mm timing relays available mono-time ranges complete the cat. no. with the cor- responding identification from the table on the next page. note: only the 700 ? fsa and 700 ? fsb are available with the ? u ? multi ? time setting ranges (0.05s to 60h). multi-time setting ranges 0.05 s...60 h (1s) 0.05...1 s (3s) 0.15...3 s (10s) 0.5...10 s (1mn) 0.05...1 min (3mn) 0.15...3 min (10mn) 0.5...10 min (1h) 0.05...1 h (3h) 0.15...3 h (10h) 0.5...10 h (60h) 3...60 h 10h see 700 ? fs timing charts cat. no. cat. no. (a) on-delay 700 ? fsa3cu23 the output contact changes state after the time delay is completed. 700 ? fsa3fu23 700 ? fsa3uu23 700-fsa4uu23 700-fsa4uz12 700 ? fsa3 z12 700 ? fsa3 u23 700-fsa4uz12 (b) off-delay 700-fsb3cu23 (b) off-delay input power must be supplied to terminal (a1/a2) continuously. the output contact changes state when switch ? s ? is closed. when switch ? s ? is opened, the time delay 700-fsb3fu23 700-fsb3uu23 700-fsb4uu23 700-fsb4uz12 changes state when switch ? s ? is closed. when switch ? s ? is opened, the time delay begins. after the time delay is completed, the contact returns to shelf state. 700-fsb3 z12 700-fsb3 u23 700-fsb4uz12 (c) on- and off-delay input power must be supplied to terminal (a1/a2) continuously. the output contact 700-fsc3ku23 700-fsc3lu23 changes state when switch ? s ? is closed and the time delay complete. when switch ? s ? is opened, the time delay begins again. after the time delay is completed, the contact returns to shelf state. 700-fsc3lu23 700-fsc3 z12 700-fsc3 u23 ? (d) one shot 700-fsd3ku23 700-fsd3lu23 the output contact changes state when the relay is energized. the output contact returns to shelf state when the time delay is completed. 700-fsd3lu23 700-fsd3 z12 700-fsd3 u23 ? (e) fleeting off-delay (min. pulse ac 50ms ? dc 30ms) input power must be supplied to terminal (a1/a2) continuously. the output contact changes state after closing and opening switch ? s ? . after the time delay is completed, the contact returns to shelf state. 700-fse3ku23 700-fse3lu23 700-fse3 z12 700-fse3 u23 ? (f) flasher (repeat cycle starting with pulse) the output contact changes state when power is applied. at the end of the time delay, the output contact returns to shelf state. this cycle continues until the power is removed. 700-fsf3ku23 700-fsf3lu23 700-fsf3 z12 700-fsf3 u23 ?
4 700 ? fs electronic high performance timing relays technical data, continued see 700 ? fs tining charts spdt dpdt see 700 ? fs tining charts cat. no. cat. no. (g) flasher (repeat cycle starting with pause) the output contact remains in the shelf state until the time delay is completed. when the time delay is completed, the contact changes state. this cycle continues until the power is removed. 700-fsg3ku23 700-fsg3lu23 700-fsg3 z12 700-fsg3 u23 ? (i) on-delay pulse generator the output contact changes state when the time delay is completed. after 0.5s the contact opens. 700-fsi3ku23 700-fsi3lu23 700-fsi3 z12 700-fsi3 u23 ? (j) on-delay (pulse controlled) (min. pulse ac 50ms ? dc 30ms) input power must be supplied to terminal (a1/a2) continuously. when switch ? s ? is closed, the time delay begins. the output contact changes state at the end of the time delay. the output contact returns to shelf state when the power to (a1/a2) is removed. 700-fsj3ku23 700-fsj3lu23 700-fsj3 z12 700-fsj3 u23 ? (k) one shot / watch dog (pulse controlled) (min. pulse ac 50ms ? dc 30ms) input power must be supplied to terminal (a1/a2) continuously. when switch ? s ? is closed, the output contact changes state. the output contact will open when switch ? s ? is open for longer than the time setting. 700-fsk3ku23 700-fsk3lu23 700-fsk3 z12 700-fsk3 u23 ? (l) pulse converter (min. pulse ac 50ms ? dc 30ms) input power must be supplied to terminal (a1/a2) continuously. when switch ? s ? is closed, the output contact changes state. when the time delay is completed, the output contact returns to shelf state. the time ? t ? is not influenced by the duration of the control pulse. 700-fsl3ku23 700-fsl3lu23 700-fsl3 z12 700-fsl3 u23 ? mono-time ranges complete the cat. no. with mono-time range identification time ranges 0.05...1 s 0.15...3 s 0.5...10 s 1.5...30 s 0.05...1 min 0.15...3 min a b c d e f time ranges 0.5...10 min 1.5...30 min 0.05...1 h 0.15...3 h 0.5...10 h 3.0...60 h 0.05 s...60 h g h i j k l u 700 ? fsh special function flasher (repeat cycle starting with pulse or pause) timing relays description spdt up down switch ? fsh3u t 2 setting t 1 setting separate range settings 1 range setting 700 ? fsh3u 700 ? fsh3v supply voltages (a1/a2) z12 12 vdc u23 24...48 vdc 24...240 vac, 50/60 hz multi-time setting ranges u 0.05s...60 h (1 range setting) v 0.05s...60 h (2 range settings) (1s) 0.05...1 s (3s) 0.15...3 s (10s) 0.5...10 s (1mn) 0.05...1 min (3mn) 0.15...3 min (10mn) 0.5...10 min (1h) 0.05...1 h (3h) 0.15...3 h (10h) 0.5...10 h (60h) 3...60 h 10h see 700 ? fs timing charts cat. no. (h) flasher (repeat cycle starting with pulse or pause) the repeat cycle timer permits different settings for on and off times. the following operating modes are possible: ? oscillating mode; repeat cycle starts with voltage applied at a1 and b1, and continues to repeat until voltage is off. ? one cycle mode; started by energizing b1 with voltage on a1 and a2. ? output starts with pulse or pause (switch ? ? ? ? ? note: if b1 is pulsed, a one full time cycle consisting of t 1 and t 2 is completed.
5 700 ? fs electronic high performance timing relays technical data, continued 700 ? fsq special function off ? delay without supply voltage timing relays description spdt dpdt supply voltages (a1/a2) u18 24...240 v ac 50/60 hz 24...240 v dc multi ? time setting range , q 0.15 s...10 min (2.5s) 0.15...2.5 s (10s) 0.5...10 s (80s) 4...80 s (10mn) 0.5...10 min see 700 ? fs timing charts cat. no. cat. no. (q) off-delay without supply voltage (true off ? delay) when the input power is turned on, the output contact changes state. when the power is removed, the time delay begins. the output contact returns to shelf state at the end of the time delay. 700 ? fsq3qu18 700 ? fsq4qu18 700 ? fsy special function star delta timing relays description 2 no supply voltages (a1/a2) u23 24...48 vdc 24...240 vac, 50/60 hz available mono-time ranges complete the cat. no. with the cor- responding identification from the table below. cat. no. (y) star-delta timing relay when power is applied, the output contact 17/18(y) changes state. after the time setting, the output contact 17/18(y) returns to shelf state. after the fixed time (50 to 60 ms), the output contact 17/28 changes state. both output contacts return to shelf state whenever the power is removed. 700-fsy2du23 700-fsy2 u23 mono-time ranges complete the cat. no. with mono-time range identification. for 700 ? fsy relays only. time ranges 0.5...10 s 1.5...30 s 0.05...1 min 0.15...3 min 0.5...10 min c d e f g specifications time characteristics (according to vde 0435, part 2021) setting accuracy 5% of full scale repeatability 0.2% of the setting values tolerance voltage: 0.001%/% u temperature: 0.025%/ supply supply voltages 24...48 vdc and 24...240vac, 50/60 hz (dual voltage) voltage tolerance ? 20% to +20% (dc), ? 15% to +10% (ac) power consumption 0.5 w at 24 vdc, 5 va at 240 vac time energized 100% reset time 50 ms voltage isolation 20 ms without reset (supply voltage) cable length ? (supply voltage control) max. 250 m (800 ft) pulse control (b1) pulse duration 50 ms (ac), 30 ms (dc) input voltage supply voltage range input current 1 ma cable length max. 250 m (800 ft) without parallel load between b1 and a2 max. 50 m (160 ft) with load ( 3 k ) between b1 and a2
6 700 ? fs electronic high performance timing relays specifications, continued outputs contact type relay as changeover switch switching capacity voltage: 440 vac current i th : 8 a power: 2000 va according to iec 947-5-1: 3 a/440 vac (inductive load, ac 14) 3 a/250 vac (inductive load, ac 15) 1 a/24 vdc (inductive load, dc 13) according to ul 508: 1.5 a/250 vac (b300) 3 a/120 vac (b300) short-circuit protection 10 a gl (fast blow fuse) life mechanical: 30 mil. of operations electrical operations: 4 mil. at 1 a/250 vac, cos = 1 0.2 mil. at 6 a/250 vac, cos = 1 1.5 mil. at 1 a/250 vac, cos = 0.3 0.3 mil. at 3 a/250 vac, cos = 0.3 0.5 mil. at 6 a/24 vdc, resistive 2 mil. at 4 a/24 vdc, resistive 2 mil. at 0.2 a/230 vdc, resistive 1 mil. at 0.4 a/24 vdc, l/r = 20 ms 1 mil. at 0.2 a/110 vdc, l/r = 20 ms 1 mil. at 0.1 a/230 vdc, l/r = 20 ms state indicator 1 led, combination signal setting accuracy 5% of full scale general data insulation characteristics 2 kvac/50 hz test voltage according to vde 0435 and 6 kv 1.2/50 s surge voltage according to iec 947-1 between all inputs and outputs emc/interference immunity performance of following requirements: surge capacity of the supply voltage according to iec 1000-4-5: 4 kv 1.2/50 s burst according to iec 1000-4-4: 6 kv 6/50 ns esd discharge according to iec 1000-4-2: contact 8 kv, air 8 kv electromagnetical hf field according to iec 801-3 and conducted electromagnetical hf signal according to iec 801-6: level 3 emc/emission electromagnetical fields according to en 55 022: class b safe isolation according to vde 106, part 101 climatic withstand 56 cycles (24 h) at 25...40
7 700 ? fs electronic high performance timing relays approximate dimensions (1 ? 3/8) (9/32) (9/32) (1 ? 3/8) (1 ? 3/8) (9/32) 700-fs (1 c/o) 700-fs (2 c/o) 700-fsh3v... (3 ? 3/32) (57/64) (3 ? 25/32) (3 ? 63/64) (4 ? 5/16) (57/64) (3 ? 25/32) (3 ? 3/32) (3 ? 63/64) (4 ? 5/16) (3 ? 3/32) (57/64) (3 ? 25/32) (3 ? 63/64) (4 ? 5/16) dimensions are shown in millimeters (inches). dimensions are not intended to be used for manufacturing purposes. 199-fsa for panel mounting, use the 199?fsa panel mounting adapter.
8 700 ? fs electronic high performance timing relays timing charts, single function (a) on-delay (b) off-delay (d) one shot (f) flasher (repeat cycle starting with pulse) (e) fleeting off?delay (min. pulse ac 50ms ? dc 30ms) (l) pulse converter (c) on?and?off-delay (i) on-delay pulse generator (g) flasher (repeat cycle starting with pause) (j) on-delay (pulse controlled) (min. pulse ac 50ms ? dc 30ms) (k) one shot/watch dog (pulse controlled) (min. pulse ac 50ms ? dc 30ms) output output 1 output 2 output 2 output output 1 output 2 output 2 output output output output output output output output output (off) off-function (on) on-function cleverly designed function display led (green) output in rest position, no timing output in rest position, time running output in operation position, no timing output in operation position, time running a voltage other than the supply voltage can also be used at b1. output 2, selectable as instantaneous contact with sliding switch ( ? bridge or potentiometer 10 k , min. 0.25 w (low voltage) for external time setting. set timer dial to 0.0. output 1 output 2 output 1 output 2
9 700 ? fs electronic high performance timing relays timing charts, special function (y) star ? delta wiring connections 17 common 18 y 28 2 no with common (h) flasher repeat cycle timer ? switch ? x ? is up supply voltage connected to a1 and b1. oscillating mode starting with pause. (h) flasher repeat cycle timer ? switch ? x ? is down supply voltage connected to a1 and b1. oscillating mode starting with pulse. (h) flasher repeat cycle timer ? switch ? x ? is up pulse controlled, output starts with pause (min. pulse ac 50ms ? dc 30ms) one cycle mode (h) flasher repeat cycle timer ? switch ? x ? is down pulse controlled, output starts with pulse (min. pulse ac 50ms ? dc 30ms) one cycle mode output output output output led operation chart ? green led output at shelf state, no timing ? led off output at shelf state, time is running ? led flashing output no contact is closed, no timing ? led on output no contact is closed, time is running ? led long flashing (q) off ? delay without supply voltage (true off ? delay) output output 1 output 2 led 25 28 26 15 18 16 a1/a2 applications sequence description wiring diagram on ? delay (a) switch (x) down, (contact 21 ? 24/22) is instantaneous 700 ? fsm dpdt only delayed motor starting pushing the start button energizes a1. after the time delay, motor 1m will start stop tr 21 24 a1 a2 18 15 start 22 tr tr o.l.
10 700 ? fs electronic high performance timing relays applications, continued sequence description wiring diagram off ? delay (b) switch (x) down, (21 ? 24/22) is instantaneous 700 ? fsm dpdt only delayed motor stopping a1 and a2 must be energized continuously. pushing the start button will energize motor 1m. pushing the stop button will de ? energize b1 and motor 1m will be de ? energized after the time delay is completed. l1 stop tr b1 a1 a2 18 15 tr start l2 21 24 22 tr o.l. on ? and ? off delay (c) motor starting and stopping in a sequence input power must be applied to a1 and a2 continuously. pushing the start button will energize b1 to start the on ? delay, and energize motor 1m after the time delay is complete. when b1 is de ? energized by pushing the stop button, the off ? delay will begin, and motor 2m will turn off after the time delay is completed. stop b1 a1 a2 18 15 start tr tr o.l. o.l. one shot (d) motor on for a predetermined time each time the float switch is closed, motor 1m will run for the predetermined time that is set on the one shot timer. a1 a2 15 18 float sw o.l. fleeting off ? delay (e) motor on for a predetermined time after a stop pushing the start button and then the stop button to energize and de ? energize motor 1m, will cause motor 2m to be energized for a set time delay. stop start b1 tr a1 a2 15 18 tr 1m o.l. o.l. flasher (repeat cycle starting with pulse) (f) when limit switch (1ls) closes, the timer (tr) will close and open the contact, causing the forward fm and reverse rm motor starters to go on and off. 1ls tr 15 flasher a1 18 a2 tr fm rm o.l.
11 700 ? fs electronic high performance timing relays applications, continued sequence description wiring diagram flasher (repeat cycle starting with pause) (g) turning on an alarm horn after a time delay when limit switch (1ls) closes, the timer tr will be energized. the horn will not sound until the time setting is completed. 15 18 1ls tr tr a1 a2 horn flasher on ? delay pulse generator (i) turning on or off a latching contactor for lighting the selector switch will energize the daylight sensor. the contact (1dl) closes due to darkness and the timer (1tr) will time out, and then close contact 1tr to send a pulse (0.5s) to the latching contactor to turn on the lights. when daylight comes, the switch 1dl will switch back and energize 2tr after a time delay. the 2tr contact will pulse closed (0.5s) to reset the lighting contactor. if the signals to 1dl are short, the 1tr and 2tr contacts will not pulse. on off 1dl 1tr 2tr tr1 daylight sensor 1dl 2tr 1c latch reset a1 a2 a1 a2 1c 15 18 15 18 timers 1tr and 2tr are set to eliminate short sensor signals. on ? delay (pulse controlled) (j) pulse starts the on ? delay that turns on a motor a1 and a2 must be energized continuously. a pulse or input from the ? on ? pressure switch starts the on ? delay. after the delay is complete, the motor 1m will start. a signal from the ? reset ? pressure switch turns the motor 1m off. the delay prevents short off times. on sw reset sw low pressure hi pressure 1tr 15 b1 a1 a2 18 1tr o.l. one shot/watch dog (pulse controlled) (k) conveyor keeps running only as long as a package is sensed every time setting (5 min) a1 and a2 must be energized continuously. a pulse must be received every time setting (or sooner) to maintain the motor 1m running. this could be an energy saver, because the motor 1m will turn off if the photo sw is open for a period of time. 1tr 15 18 b1 a1 a2 1tr photo sw o.l.
12 700?fs electronic high performance timing relays publication 700?2.17 april 1998 copyright 1998 rockwell international corporation printed in usa applications, continued sequence description wiring diagram pulse converter (l) pulses are turned into a set or predetermined output when the photo switch closes the first time, the contact tr closes to energize motor 1m for the predetermined time setting. the timer will not be reset by the opening or pulsing of the photo sw until the time delay is completed. time setting is 0.05s to 10h. 15 18 photo sw b1 a1 a2 1tr 1tr o.l. off?delay without supply voltage (q) (true off?delay) a1 and a2 do not require continuous power for the off?delay time setting to be completed. turning the switch to on will energize motor 1m. when the switch is turned to off, or the power is removed, motor 1m will remain on for the time delay setting a1 a2 on off tr tr o.l. star?delta (y) starting a star?delta motor pushing the start button energizes the relay cr and the timer tr. both will hold in through cr. contact 17?18 will close energizing the star contact (y), and starting the motor for the predetermined time. then contact 17?18 will open and 50ms to 65ms later contact 17?28 will close to energize the delta contact ( ). stop start l1 cr a1 17 l2 a2 18 28 tr

▲Up To Search▲

Price & Availability of 700FS-Y2DA40

	To Download 700FS-Y2DA40 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .