View 6351XG15_2566094.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

the designers? guide visualux ltd po box 30, ilfracombe, north devon ex34 8yt united kingdom tel: +44(0)1271 865865 fax: +44(0)1271 865830 email: sales@visualux.com
visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales @ visualux. com 18 ccf l inverters - v a c ----------------------- ---------------------------------- 17 ccf l inverters - vdc ----------------------- ---------------------------------- 16 ccf l inverters (general) --------------------- ---------------------------------- 15 cold cathode fluorescent lamps (ccfl) ---------- ---------------------------------- 14 vt 600 anti-reflective surface treatment proce ss ------- ---------------------------------- 13 fixing methods for visualite contrast filters ---------- ---------------------------------- 12 application guide for visualite contrast filters --------- ---------------------------------- 11 specification fo r edge lit backlight leds ------------ ---------------------------------- 10 mel - led lighting panels -------------------- ---------------------------------- 9 mel - led lighting panels -------------------- ----------------------------------- 8 standar d (edge lit) backlights ------------------- ----------------------------------- 7 standard (edge lit) backlights ------------------- ----------------------------------- 6 specification for backlight (edge lit) light guide --------- ----------------------------------- 5 backlight information and typical customer drawing ----- ----------------------------------- 4 s , e , sa series and pcb (edge lit) backlights -------- ----------------------------------- 3 lcd types ----------------------------- ----------------------------------- 2 introduction ------------------------------ ----------------------------------- 1 contents ------------------------------- ----------------------------------- page subject visualux designers guide
introd uction thank you for request i ng the latest version of the visualux designers guide, we hope that you find it both helpful and informative. the sta ff of visualux has been involved with the design and manufact ure of products for the opto electronics and associated industr ies since the early 1980?s and during this time have been respo n sible for designing and supplying products to many of the major electronics companies throughout the world. we operate a policy of continuous development and we are con stantly evaluati ng new materials, so that our products can continue to stay at the forefront of our industry. our major product lines, led backlights and contrast filters, are det a i le d in this catalogue. curre ntly we are developing a range of ccfl (cold cathode f l uorescent light ing ) devices which include the lamps, driv e inverters and acrylic light guides - these are also shown in the visualux designers guide . we wer e als o i nv o l v ed fo r many ye ars with th e cl a r e/ p e nda r ra nge of hig h qu al i t y sw i t c h and i nd i c a t o r asse m b l i e s, wh i c h wer e ren o w ne d fo r th ei r qu al i t y and rel i a b i l i t y, and hav e mai nt a i ne d a sou rc e of su pp l y fo r th es e produ c ts dir ec tl y fr o m eu r o p e. if you are unable to find the information that you require in this catalogue then please contact us and we will try our best to supply th e data that you require. we would be very pleased to hear from you if you feel that the information in this catalogue is not exten sive enough or could be presented in a more ?user friendly? way. thank you again for the interest that you have shown in our products. rachel goldsworthy sales & marketing director catalogue issue no: 22- 11/99 (web) visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales @ visualux. com page 2
visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales @ visualux. com page 3 a standard transflective lcd a transflective lcd with a visualux led backlight a negative transmissive lcd with a visualux led backli ght there are three main types of lcd display: v ref lective - this type of display relies completely on reflected light (daylight or artificial light) to be viewable - you cannot see it in the dark and it cannot be backlit . v transflective - this type of display can use reflected light or be backlit . v transmissive - this type of display can usually be viewed using reflected light or be backlit. styles of lcd (liquid crystal display)
isualux backlights were primarily designed for use with transflective and transmi ssive lcd s but are being used in a number of other areas that include status warning indicators and low power, long life, lighting systems. all visualux backlights are supplied, unl ess otherwise requested, as an s-series style backlight . below are descriptions of the standard options that are available. s-series the ultimate backlight , designed for a pplications where maximum light output efficiency is the primary concern. visualux backlights use custom designed led emitters (fig.1 ) to ?fire? light into a cast acrylic light guide. the s-series uses ultra white secondary reflectors, located on the vertical edges, to reflect light down to the primary reflector that is located below the viewing area (fig.2 ) . we use ultra white spray coatings for our primary and secondary reflectors, unlike our competitors who use a white adhesive tape which can easily delaminate . th e s-series has been designed to utilise all available emitted light and this results in a very low light loss factor. e-series the e-series visualux backlight is manufactured to the same high standards as the s-series but has been designed for applications where cost effectiveness is of more importance than light output effi cienc y. instead of ultra white secondary reflectors, the e-series use s the reflective properties of a precision machined edge . sa -series this series of visualux backlights has been designed for applications that require all the benefits of the visualux technology but at the lowest possible price. sa-series backlights are supplied as two separate unassembled components , e.g. led emitter and light guide. the led emitter is the same type as used in the s and e series visualux backlights and the cast acr yli c light guide is of the same design as the e-series which utilised the reflective properties o f the light guides precision machined edge but without the machined ledge for the led emitters. pcb modules the pcb modules are either s, e or sa series backlights mounted on to a single sided or pth circuit board. apart from the backlight we are able to mount resistors and other devices that may be required. the major advantage of this system is that only two leads are needed to be terminated. visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@ visualux.com page 4 visualux (edge lit) backlights v
hen the visualux backlights are used with transflective lcds a brilliant white reflector is usually sufficien t . however, a transmissive (transparent) lcd will benefit from using a backlight that has a brightly coloured primary reflector, because the lcd ch aracters or gra phics will have a contrasting background even if the backlight is not illuminated. one of the major benefits of using a visualux backlight is the exceptionally long life span of the device, which can be up to 100,000 hours - this is equivalent, in most cases, to the life of a typical lcd . visualux backlights are available in a large range of standard sizes with a brilliant white or brightly coloured primary reflector. the secon dary refl ectors of the s-series are always brilliant white. customised sizes are available and the cost for the origination of s and e-series backlights is usually less than 200. for this sum you will receive an engineering drawing, which is allocated its own uni que data reference number and a quantity of backlights dependent on the complexity of the part. delivery is usually 3 - 4 weeks from receipt of order. for large volume usage we can also supply led emitters made to your custom design. visualux operate a policy of constan t development, so if you do not find the type or style of backlight that you require in this designers catalogue, please contact your local visualux sales office to discuss your requirements. visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@ visualux.com page 5 a typical visualux backlight custom drawing visualux (edge lit) backlights w
175 n/ mm 2 din 53456 indentation hardness 4 % din 53455 elongation at break 3,000 n/mm 2 din 53457 modules of elasticity 12 kj/ m 2 din 53453 impact strength 120 n/mm 2 din 53452 flexural strength 125 n/mm 2 din 53454 compressive strength 65-68 n/ mm 2 din 53455 tensile strength values unit test mechanical properties : 0.19 w/ m o c . thermal conductivity 1.46 kj/kg o c . specific heat 0.08 mm/m o c . vde 0304/1 coef f icient of linear thermal expansion 150-170 o c formi ng temperature 105 o c din 53460 heat stability - vicat b thermal properties : 0.06 din 53483 dis sipation factor, 50 hx. 3.4 din 53483 dielectric constant, 10 3 hz. 10 15 ohm x cm. din 53482 volume resistively 40 kv/mm. din 53481 dielectric strength electrical properties : 92 % 4500 a light transmission 0.17 % at 20 o c . in 24 hrs . water absorption 1.2 g/ cm 2 din 53472 specific gravity other properties : visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@ visualux.com page 6 specification for the visualux backlight body (light guide) visualux (edge lit) backlights
visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@ visualux.com page 7 48.70 x 20.80 4 23.30 48.70 a vlx158 47.50 x 14.50 4 17.00 47.50 a vlx156 67.00 x 26.00 6 28.50 67.00 a vlx154 134.00 x 32.50 13 35.00 134.00 a vlx152 108.00 x 32.50 10 35.00 108.00 a vlx150 88.00 x 32.50 8 35.00 88.00 a vlx148 98.00 x 22.00 9 24.50 98.00 a vlx146 90.00 x 19.50 8 22.00 90.00 a vlx144 90.00 x 25.50 8 28.00 90.00 a vlx142 76.50 x 25.50 7 28.00 76.50 a vlx140 47.00 x 13.00 1 13.00 49.50 b vlx138 54.50 x 20.00 1 20.00 57.00 b vlx136 48.00 x 20.00 1 20.00 50.50 b vlx134 39.50 x 20.00 1 20.00 42.00 b vlx132 49.00 x 12.50 1 12.50 51.50 b vlx130 50.00 x 17.00 1 17.00 52.50 b vlx128 48.00 x 15.50 1 15.50 50.50 b vlx126 27.50 x 15.50 1 15.50 30.00 b vlx124 23.50 x 18.00 1 18.00 26.00 b vlx122 41.00 x 10.50 1 10.50 43.50 b vlx120 36.00 x 14.50 1 14.50 38.50 b vlx118 28.50 x 10.50 1 10.50 31.00 b vlx116 23.50 x 9.50 1 9.50 26.00 b vlx114 23.50 x 10.50 1 10.50 26.00 b vlx112 66.00 x 19.50 6 22.00 66.00 a vlx110 66.00 x 19.50 6 18.00 66.00 a vlx108 47.00 x 20.50 4 23.00 47.00 a vlx106 47.00 x 18.00 4 20.50 47.00 a vlx104 47.00 x 27.00 4 29.50 47.00 a vlx102 66.50 x 27.00 6 29.50 66.50 a vlx100 illuminated area (mm) no. of leds h l style reference a range of visualux backlight designs visualux (edge lit) backlights
visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@ visualux.com page 8 a range of visualux backlight designs 43.00 x 72.00 14 48.00 72.00 d vlx254 67.50 x 48.00 12 53.00 67.50 d vlx252 93.50 x 71.00 18 76.00 93.50 d vlx250 166.00 x 60.00 32 65.00 166.00 d vlx248 77.00 x 26.00 4 26.00 82.00 c vlx246 66.00 x 16.50 2 16.50 71.00 c vlx244 56.00 x 13.00 2 13.00 61.00 c vlx242 47.00 x 13.00 2 13.00 52.00 c vlx240 62.00 x 17.00 2 17.00 67.00 c vlx238 68.00 x 14.50 2 14.50 73.00 c vlx236 60.00 x 14.50 2 14.50 65.00 c vlx234 54.50 x 20.00 2 20.00 59.50 c vlx232 48.00 x 20.00 2 20.00 53.00 c vlx230 39.50 x 20.00 2 20.00 44.50 c vlx228 49.00 x 12.50 2 12.50 54.00 c vlx226 50.50 x 17.00 2 17.00 55.50 c vlx224 48.00 x 15.50 2 15.50 53.00 c vlx222 27.50 x 15.50 2 15.50 32.50 c vlx220 23.50 x 18.00 2 18.00 28.50 c vlx218 41.00 x 10.50 2 10.50 46.00 c vlx216 36.00 x 14.50 2 14.50 41.00 c vlx214 28.50 x 10.50 2 10.50 33.50 c vlx212 23.50 x 9.50 2 9.50 28.50 c vlx210 23.50 x 10.50 2 10.50 28.50 c vlx208 66.00 x 15.50 2 15.50 71.00 c vlx206 63.50 x 18.80 2 18.80 68.50 c vlx204 48.00 x 23.00 4 23.00 53.00 c vlx202 63.50 x 28.50 4 28.50 68.50 c vlx 200 illuminated area (mm) no. of leds h l style reference visualux (edge lit) backlights
for term ination and colour details please contact visua l ux (all dimesions in mm) visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@ visualux.com page 9 360 4.2 72 5.00 24.50 100.00 28.50 104.00 vlx-mel 6010 120 4.2 24 5.00 19.00 61.50 22.00 65.50 vlx-mel6009 360 4.1 72 5.00 39.80 71.70 43.50 73.30 vlx-mel6008 210 4.2 42 5.00 20.00 85.00 24.00 89.00 vlx-mel 6007-2 130 4.2 26 5.00 20.00 85.00 24.00 89.00 vlx-mel 6007 -1 210 4.2 42 5.00 20.00 85.00 24.00 89.00 vlx-mel6007 150 4.2 30 4.00 18.40 58.70 20.80 60.70 vlx-mel 6006-1 180 4.2 36 4.00 18.40 58.70 20.80 60.70 vlx-mel 6006 130 4.2 26 4.00 16.60 65.60 18.60 68.00 vlx-mel6005 390 4.2 78 5.00 39.50 74.00 43.50 78.00 vlx-mel6004-1 390 4.2 78 5.00 39.50 74.00 43.50 78.00 vlx-mel6004 280 4.2 56 5.00 16.70 155.60 21.20 159.20 vlx-mel 6003-3 280 4.2 56 5.00 16.70 155.60 21.20 159.20 vlx-mel6003 - 2 280 4.2 56 5.00 16.70 155.60 21.20 159.20 vlx-mel 6003-1 280 4.2 56 5.00 16.70 155.60 21.20 159.20 vlx-mel 6003 240 4.2 48 5.00 26.50 78.30 29.50 82.30 vlx-mel 6002-1 260 4.2 52 5.00 26.50 78.30 29.50 82.30 vlx-mel 6002 110 8 44 5.00 26.50 68.00 29.50 72.00 vlx-mel 6001- 1 220 4.2 44 5.00 26.50 68.00 29.50 72.00 vlx-mel 6001 ma typ . v no. of leds overall thicknes s d (lit width) c (lit length) b (width) a (length) part no. mel - led lighting panels mel (maximum even luminance ) panels - these lighting panels are manufactured for visualux and offer a totally even illumination due to the leds being placed in a 'lattice' directly beneath the viewing area. visualux (bottom lit) backlights
for term ination and colour details please contact visua l ux (all dimesions in mm) visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@ visualux.com page 10 120 4.2 24 4.70 16.50 66.00 21.50 70.00 vlx -mel 601 6 130 4.2 26 6.50 17.80 66.00 20.30 68.00 vlx -mel 6015 210 4.2 42 6.00 20.80 85.80 24.00 89.00 vlx -mel 6014 440 4.2 88 5.20 31.60 150.00 34.60 155.00 vlx -mel 6013 225 4.2 18 5.00 17.00 61.00 19.00 64.00 vlx- mel 6012 375 4.2 30 5.20 17.60 95.00 20.40 99.50 vlx- mel6011 ma typ . v no. of leds overall thicknes s d (lit width) c (lit length) b (width) a (length) part no. we are constantly adding to the list of standard size mel panels - please contact visualux for further details. visualux (bottom lit) backlights mel - led lighting panels mel (maximum even luminance ) panels - these lighting panels are manufactured for visualux and offer a totally even illumination due to the leds being placed in a 'lattice' directly beneath the viewing area.
special note v low melting point solder should be used. v maximum soldering tip temperature should not exceed 255 o c . v maximum soldering time should not exceed 3-4 seconds from the reflector edge. visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@ visualux.com page 11 specification for visualux backli ght leds 25ma average forward current - 55 o c + 100 o c storage temperature -30 o c + 85 o c operating temperature 1.0 amp peak forward current 10 seconds pulse 0.3 duty cycle ratings characteristics 660nm 585nm 610nm 570nm 630nm peak wavelength (p) typ. 80mcd typ. 35mcd typ. 30mcd typ. 40mcd typ. 15mcd lumin ous intensity (iv) if= 10ma 0.1ma max 0.1ma max. 0.1ma max. 0.1ma max. 0. 1ma max. reverse current (ir ) vr= 10v 3.6v typ. 4.0v max . 4.2v ty p. 4.6v max . 3.6vty p . 4.0v max . 4.2v ty p. 4.6v max. 4.2v ty p. 4.6v max. forw ard voltage (vf) if= 20ma ll-1-2-her ll-1-2-y ll-1-2-a ll-1-2-g ll-1-2-r reference no: high efficiency red yellow amber green red colour: visualux (edge lit) backlights
application guide for visualite contrast fil ters he visualite contrast filters that are available from visualux ltd are manufactured from the highest quality pol ymers currently available world-wide . the standard thi ckness for these filters is 1. 5mm but custom thicknesses are available, to sp ecial order, and are available in in cre ments of 0. 1mm starting from 0.5mm . * deno t es non st a n da r d co l o u rs - mi nimu m pu rc h a s e qu an t it i e s ap pl y q manufactured from high grade optical a c rylic q standard thickness 1.5mm - other thicknesses available to order q standard thickness toler a nce an un r ivalled +/- 10% q available with our vt600 anti glare treatment yo ur visu a li t e co nt r ast fi l t e r i s av a i la b l e as a cus t o m cut to siz e part or can be pu rc h a s ed as a co m pl e t e sh ee t fo r yo ur ow n fa b r i cat i o n. machi n i n g opti o ns ar e als o av a i la b l e fo r cus t o mi s i n g yo ur parts - a ful l des i g n and dev e l o pm e n t te am i s av a i lab l e to hel p with any des i g n prob l e ms th a t mi g ht be enc o u n t e re d. visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@visua lux .com page 12 visualite contrast filters l.c.d . or any display clear 0000 blue led or vacuum fluorescent blue 3214 plasma * amber 5423 electroluminescent * yello w 5425 any single or multi coloured display * grey 7210 any single or multi coloured display * grey 2064-2 any single or multi coloured display grey 2711 l.e.d . (green) * green 4748 vacuum fluorescent green 4720 high brightness or matched l.e. d s red 6531 l.e.d. or plasma * red 6400 l.e.d . * red 2424 suggested use ( disp lay type) colour t
above are shown two preferred methods of fixing a visualite contrast filter method a this is the most cost effective way of fixing. the visualite contrast filter is supplied as a square or rectan gle and is bonde d to the underside of the front panel by using a suitable sealant or double sided gasket. method b this method, although more expensive than method a, gives a more prof essional and aesthetically pleasing look to the front panel. the visualite contrast fil ter is supplied with a mac hined ledge around the perimeter of the filter. the ledge is usually between 5-10 mm wide, depending on the size of the filter, and the depth of the ledge is usually the same as the thickness of the front panel into which it will be fitted. as with method a, a suitable sealant or double sided gasket should be used for fixing. a major advantage of using this method of fixin g is that the visualite contrast filter will be fixed level with the top surface of the front panel thus minimising the build up of dirt and dust in the viewing area. visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@visua lux .com page 13 method a method b visualite contrast filters
visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@visua lux . com page14 vt600 anti-reflective . . . . . how would you prefer your display to look ? vt600 anti-reflective surface treatment process vt 600 anti-reflective surface treatment process is a coating developed by visualux engineers. th is surface treatment process enables unwanted light reflections to be dissipated from the viewing surfaces of acr y li c , pol ycarbonate , pvc and other ty pes of plastic displa y filters and panels. un like other ?anti-glare? style coatings, vt 600 has been specificall y formulated to allow the forming of the displa y panels or fil ters after vt600 has been applied and this will not result in any cracking or peeling of the coating. th is is particularly useful if the customer needs to purchase the material in sheets and then form the parts after other manufacturing processes have been undertaken. vt 600 is applied to the visualite contrast filters as standard and can be applied to ?free issue? mouldings and bezels. vt 600 has also been applied to the front polarisers of lcds, i n situations where a low l evel of light reflec tion is required.
cold cathode fluorescent lighting visualux are able to supply a range of ccfl tubes, inverters and light guides to suit most applications. due to the very large range of ccfl tubes and inverters currently available, visualux will advise on the best combination of parts to suit your application. we are able to supply just the t ube or inve rter or in house, we manufacture complete ccfl modules to your specification. these mod u les comprise ccfl tube(s) fitted to an acrylic light guide which can then connected to an inverter. ccfl sizes (normally available from stock) (all dimesions in mm) visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@visua lux . com page15 visual ux ccfl products h.v . lead & connector to fit our vlx inv inverters (except vlx inv-8002) connectort / wire end 300/600 vlxlead - 300/600 complete with inverter wire ends 50 2.0 microlux2x50 kit wire ends 252 4.1 vlxf-252-rgd/4.1 wire ends 220 4.1 vlxf-220-rgd/4.1 leads & connector * 300 4.0 vlxf-300-syn/4.0 leads & connector * 266 4.0 vlxf-266-syn/4.0 leads & connector * 216 4.0 vlxf-216-syn/4.0 leads & connector * 100 4.0 vlxf-100-syn/4.0 leads & co nne ctor * 360 3.0 vlxf-360-syn/3.0 wire ends 300 3.0 vlxf-300-rgd/3.0 wire ends 250 3.0 vlxf-250-rgd/3.0 wire ends 240 3.0 vlxf-240-rgd/3.0 wire ends 216 3.0 vlxf-216-rgd/3.0 wire ends 50 3.0 vlxf-50-rgd/3.0 wire ends 300 2.6 vlxf-300-rgd/2.6 wire ends 216 2.6 vlxf-216-rgd/2.6 wire ends 258 2.4 vlxf-258-rgd/2.4 wire ends 240 2.4 vlxf-240-rgd/2.4 wire ends 220 2.4 vlxf-220-rgd/2.4 notes termination length diameter part no. we are constantly increasing our range of ccfl tubes and inverters - please contact visualux regularly for the latest product information. the above list shows a range of the st ock size ccf ls currently available. visualux offer a full customising service on ccfls with lamps available in len gths and diameters to your specification . shaped lamps are also availab le to special order. * the connect o rs fit the vlx inv series of inverters except vlx inv-8002
visua lux supply a large range of standard ccfl drive inverters to suit the most demanding applications. whe ther it is as a ?one o ff ? replacement for an existing unit or a l arge production batch requirement, your orders wil be treated with the same high degree of professionalism . a visu a lu x i nv e r te r can be su pp l i e d with sol de r pad co nn e c ti o ns, flyi n g leads, or co nn e c to rs - dep e n di n g on th e inverter ty p e. if yo ur produ c t req u i r es a cus t o m i nv e r te r, visu a lu x can usu a ll y hav e cus t o m des i g ns and pri c i n g av a i la b l e withi n a week. inverter configurations already suppl i ed by visualux include va riable range input devices and mul t i p le output sy stems. to be sure of obtaining the maximum life from your ccf ls it is essential to use an inverter that is matched as accurat ely as possible to the chara c teristics of the lamp. overdriving can result in a brighter lamp but this will inevita bly result in a mu c h reduced lamp life. visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@visua lux . com page16 visual ux ccfl products we are constantly increasing our range of ccfl tubes and inverters - please contact visualux regularly for the latest product information. standard inverters available are: 5vdc input - single output 5vdc input - dual output 9vdc input - single output 9vdc input - dual output 12vdc input - single output 12v dc input - dual output 24vdc input - single output 24vdc input - dual output 12vdc input - single output (dimming) 12vdc input - up to 8 lamp output with tt l on/off and brightness control 230 v a c , 50hz input - dual output cold cathode fluorescent lighting - drive inverters
visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@visua lux . com page17 visual ux ccfl products cold cathode fluorescent lighting - drive inverters (vdc ) to order 25 351-420 70 x 21 x 12.5 24 2 vlx inv - 44042 to order 25 251-350 70 x 21 x 12.5 24 2 vlx inv - 43042 to order 25 151-250 70 x 21 x 12.5 24 2 vlx inv - 42042 to order 25 50-150 70 x 21 x 12.5 24 2 vlx inv - 41042 sto ck ite m 1 351-420 70 x 21 x 12.5 12 2 vlx inv - 44032 stock item 1 50-150 70 x 21 x 12.5 12 2 vlx inv - 41032 to order 25 251-350 70 x 21 x 12.5 9 2 vlx inv - 43022 to order 25 151-250 70 x 21 x 12.5 9 2 vlx inv - 42022 to order 25 50-150 70 x 21 x 12.5 9 2 vlx inv - 41022 to order 25 151-250 70 x 21 x 12.5 5 2 vlx inv - 42012 to order 25 50-150 70 x 21 x 12.5 5 2 vlx inv - 41012 to order 25 351-420 70 x 21 x 12.5 24 1 vlx in v - 4454 to order 25 251-350 58.5 x 21 x 11.5 24 1 vlx in v - 4354 to order 25 151-250 58.5 x 21 x 11.5 24 1 vlx in v - 4254 to order 25 50-150 58.5 x 21 x 11.5 24 1 vlx in v - 4154 stock item 1 351-420 70 x 21 12.5 12 1 vlx in v - 4453 to order 25 351-420 70 x 21 12.5 9 1 vlx in v - 4452 to order 25 251-350 58.5 x 21 x 11.5 9 1 vlx in v - 4352 to order 25 151-250 58.5 x 21 x 11.5 9 1 vlx in v - 4252 to order 25 50-150 58.5 x 21 x 11.5 9 1 vlx in v - 4152 to order 25 251-350 58.5 x 21 x 11.5 7.2 1 vlx in v - 4321a to order 25 251-350 58.5 x 21 x 11.5 6 1 vlx in v - 4321 to order 25 351-420 70 x 21 12.5 5 1 vlx in v - 4451 to order 25 251-350 58.5 x 21 x 11.5 5 1 vlx in v - 4351 to order 25 151-250 58.5 x 21 x 11.5 5 1 vlx in v - 4251 to order 25 50-150 58.5 x 21 x 11.5 5 1 vlx in v - 4151 stock ite m - dimming 1 80 x 20 x 9.0 8 - 20 1 vlxinv-8002 stock item 1 251-350 70 x 21 x 12.5 12 2 vlxinv-43032 stock item 1 151-250 70 x 21 x 12.5 12 2 vlxinv-42032 sto c k item 1 251-350 58 x 21 x 11.5 12 1 vlxinv-4353 stock item 1 151-250 58 x 21 x 11.5 12 1 vlxinv-4253 sto ck item 1 50-150 58 x 21 x 11.5 12 1 vlxinv-4153 notes minimu m order ccfl length 3-4mm dia . * size l x w x h (mm) input (vdc) lamps inverter * 3-4 mm dia. is an example of usage - we have used these inverters on ccfls from 2.6 to 6.0 mm diameter
visualux ltd tel: +44 (0)1271 865865 fax: +44 (0)1271 865830 e-mail : sales@visua lux . com page18 visual ux ccfl products cold cathode fluorescent lighting - drive inverters (v a c ) sto ck item 1 301-420 163 x 22.5 x 14.5 115/230 2 vlx inv- 4202u sto ck item 1 151-300 163 x 22.5 x 14.5 115/230 2 vlx inv- 3002 u sto ck item 1 50-150 163 x 22.5 x 14.5 115/230 2 vlx inv- 1502 u to order tba 301-420 163 x 22.5 x 14.5 115 2 vlx inv- 1154202 to order tba 151-300 163 x 22.5 x 14.5 115 2 vlx inv- 115 3002 to order tba 50-150 163 x 22.5 x 14.5 115 2 vlx inv- 115 1502 to order tba 301-420 163 x 22.5 x 14.5 230 2 vlx inv- 2304 202 to order tba 151-300 163 x 22.5 x 14.5 230 2 vlx inv- 2303002 to order tba 50-150 163 x 22.5 x 14.5 230 2 vl x inv - 2301502 notes minimum order ccfl length 3-4mm dia. * size l x w x h (mm) input (vac) lamps inverter * 3-4 mm dia. is an ex a mple of usage - we have used these inverters on ccfls from 2.6 to 6.0 mm diameter

▲Up To Search▲

Price & Availability of 6351XG15

	To Download 6351XG15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .