Part Number Hot Search : 
B18T1 SL800 11420N00 MAX8553 2SK36 TDA282 11002 AT88S
Product Description
Full Text Search
 

To Download IE-78K0-NS-A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  document no. u14889ej3v0um00 (3rd edition) date published october 2003 n cp(k) printed in japan user?s manual IE-78K0-NS-A in-circuit emulator target devices 78k/0 series ?
user?s manual u14889ej3v0um 2 [memo]
user?s manual u14889ej3v0um 3 windows nt is either a registered tr ademark or a trademark of microso ft corporation in the united states and/or other countries. pc/at is a trademark of internati onal business machines corporation. the information in this document is current as of september, 2003. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec e lectronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
user?s manual u14889ej3v0um 4 regional information ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. [global support] http://www.necel.com/en/support/support.html nec electronics america, inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 nec electronics hong kong ltd. hong kong tel: 2886-9318 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-558-3737 nec electronics shanghai, ltd. shanghai, p.r. china tel: 021-6841-1138 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 nec electronics singapore pte. ltd. novena square, singapore tel: 6253-8311 j03.4 n ec electronics (europe) gmbh duesseldorf, germany tel: 0211-65 03 01  sucursal en espa?a madrid, spain tel: 091-504 27 87 vlizy-villacoublay, france tel: 01-30-67 58 00  succursale fran?aise  filiale italiana milano, italy tel: 02-66 75 41  branch the netherlands eindhoven, the netherlands tel: 040-244 58 45  tyskland filial taeby, sweden tel: 08-63 80 820  united kingdom branch milton keynes, uk tel: 01908-691-133 some information contained in this document may vary from country to country. before using any nec electronics product in your application, piease contact the nec electronics office in your country to obtain a list of authorized representatives and distributors. they will verify:
user?s manual u14889ej3v0um 5 introduction product overview the IE-78K0-NS-A is used in comb ination with an emul ation board (ie-780 -ns- em1, ie-780 -ns-em4) and i/o board (ie-78k0-ns-p0 ) to debug products in the 78k/0 series of 8-bit single-chip microcontrollers. target readers this manual is intended for engineers who perform debugging of systems that employ 78k/0 series 8-bit single-chip microc ontrollers using the IE-78K0-NS-A and an emulation board (ie-780 -ns-em1, ie-780 -ns-em4) and i/o board (ie-78k0-ns- p0 ). purpose the purpose of this manual is to help t he user understand the debuggi ng functions that are available by using the ie-78k 0-ns-a and the emul ation board (ie-780 -ns-em1, ie-780 -ns-em4) and i/o board (ie-78k0-ns-p0 ) together. organization when using the IE-78K0-NS-A, please refer to the manual that co mes with the ie-78k0- ns-a (this manual) as well as the manual that comes with the emulation board (ie- 780 -ns-em1, ie-780 -ns-em4) and i/o board (ie-78k0-ns-p0 ). ? basic specifications ? function outline ? system configuration ? target interface differences ? external interface function how to read this manual to understand the overall functi ons of the IE-78K0-NS-A: read this manual in the order of the contents. to understand the basic specifications: refer to chapter 1 general and chapter 2 part names . for how to connect the ie-780 -ns-em1, ie-780 -ns-em4, and ie-78k0-ns-p0 and make settings to debug 78k/0 series products: refer to chapter 3 installation . IE-78K0-NS-A user?s manual (this manual) ie-780 -ns-em1 ie-780 -ns-em4 ie-78k0-ns-p0 user?s manual
user?s manual u14889ej3v0um 6 terminology the meanings of the terms used in this manual are described in the table below. term meaning emulation device this is a general term that refers to the device in the emulator that is used to emulate the target device. it includes the emulation cpu. emulation cpu this is the cpu block in the em ulator that is used to execute user-generated programs. target device this is t he device to be emulated. target program this is the program to be debugged. target system this is the system to be debugged. this includes the target program and the hardware provided by the user. when defined narrowly, it includes only the hardware. conventions data significance: higher digits on the left and lower digits on the right note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information related documents please use the following documents in conjunction with this manual. the related documents listed below may include preliminary versions. however, not marked as such. documents related to devel opment tools (user?s manuals) document name document number IE-78K0-NS-A in-circuit emulator this manual operation u16629e language u14446e ra78k0 assembler package structured assembly language u11789e operation u16613e cc78k0 c compiler language u14298e sm78k series ver.2.52 system simulator operation u16768e sm78k series ver.2.30 or later system simulator ex ternal part user open interf ace specifications u15802e id78k0-ns ver.2.52 integrated debugger operation u16488e fundamental u11537e 78k/0 series real-time os (rx78k0) installation u11536e pm plus ver.5.10 or later u16569e pg-fp4 flash memory programmer u15260e caution the documents liste d above are subject to change without not ice. be sure to use the latest documents for designing, etc.
user?s manual u14889ej3v0um 7 contents chapter 1 general .......................................................................................................... ..................8 1.1 system configuration........................................................................................................... ........8 1.2 hardware configuration ................................................. ........................................................ ....10 1.3 basic specifications ....................................................................................................... ............13 1.4 contents in carton......................................................................................................... .............15 chapter 2 part names ...................................................................................................... .............17 2.1 parts of main unit ............................................................................................................. ..........17 2.2 board names.................................................................................................................... ...........19 2.3 external sense probe names ......................................... ...........................................................2 3 chapter 3 installation ..................................................................................................... ............24 3.1 connection ..................................................................................................................... .............24 3.2 external trigger functions ..................................................................................................... ...36 3.3 external sense................................................................................................................. ............36 3.4 jumper settings (on main board (g-780009 boar d and g-780009a board)) ........................37 3.5 low-voltage emulation settings....................................... ........................................................39 appendix a interface board (ie-70000-pci-if-a) for desktop pc ...............................40 a.1 introduction ................................................................................................................... ..............40 a.2 installation ................................................................................................................... ................41 appendix b pc card interface (ie-70000-cd-if-a) . ...............................................................42 b.1 introduction ................................................................................................................... ..............42 b.2 installation ................................................................................................................... ................43 appendix c interface board (ie-70000-98-if-c) for pc-9800 series .............................44 c.1 introduction ................................................................................................................... ..............44 c.2 installation ................................................................................................................... ................45 appendix d interface board (ie-70000-pc-i f-c) for ibm pc/at and compatibles ..47 d.1 introduction ................................................................................................................... ..............47 d.2 installation ................................................................................................................... ................48 appendix e revision history ............................................................................................... ........50
user?s manual u14889ej3v0um 8 chapter 1 general the IE-78K0-NS-A is a development t ool for effectively debugging hardware and software in which a 78k/0 series 8-bit single-chip microcontroller is used. this chapter describes the system configuration and basic specific ations of the IE-78K0-NS-A. 1.1 system configuration figure 1-1 shows the system confi guration of the IE-78K0-NS-A.
chapter 1 general user?s manual u14889ej3v0um 9 figure 1-1. IE-78K0-NS-A system configuration host machine pc-9800 series or ibm pc/at tm and compatibles integrated debugger id78k0-ns (sold separately) device file note 3 (available separately) control software ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? interface board ie-70000-98-if-c (sold separately) interface board ie-70000-pc-if-c (sold separately) interface board ie-70000-pci-if-a (sold separately) or IE-78K0-NS-A (this product) i nterface cable (ns interface cable) in-circuit emulator pc card interface interface cable ns card cable mc card cable note 5 pc card interface ie-70000-cd-if-a (sold separately) ac adapter ie-70000-mc-pc-b (sold separately) emulation board ie-780 -ns-em1 (sold separately) emulation probe np- note 2 (sold separately) conversion socket ev- g- tg - note 4 (sold separately) + i/o board ie-78k0-ns-p0 (sold separately) emulation board ie-780 -ns-em4 note 1 (sold separately) + +
chapter 1 general user?s manual u14889ej3v0um 10 notes 1. when using the ie-780 -ns-em4, it is necessary to c onnect an i/o board, the ie-78k0-ns-p0 . the ie-780 -ns-em4 and ie-78k0-ns-p0 are sold separately. 2. the np- is a product of naito densei machida mfg. co., ltd. for further information, contact naito dens ei machida mfg. co., ltd. (tel: +81-45-475-4191) 3. the device file can be downloaded fr om the nec electronics website (url: http://www.necel.com/micro/). 4. the tg - is a product of tokyo eletech corporation. contact: daimaru kogyo, ltd. tokyo electronic division (tel: +81-3-3820-7112) osaka electronic division (tel: +81-6-6244-6672) 5. this is not used for the IE-78K0-NS-A. 1.2 hardware configuration the IE-78K0-NS-A consists of the following hardware units (such as cabinet and boards). there are two kinds of board confi guration for the IE-78K0-NS-A, a tw o-board (the 78k0 main board and the 78k0 performance board) type and a one-board (a combined 78k0 main board and 78k0 performance board) type. the board type can be distinguis hed by the 2nd figure from the left in the se rial number. f or earlier indicates the two-board type and g or later indicates the one-board type. (1) two-board type (when the 2 nd figure from the left in the serial number is f or earlier.) ? cabinet ? 78k0 main board (g-780009 board) ? 78k0 performance board (g-78k0h option board) figure 1-2. IE-78K0-NS-A (two-board type) basic hardware configuration 1-1 IE-78K0-NS-A 78k0 performance board 78k0 series em1 board host machine interface board (sold separately) interface card (sold separately) dedicated bus interface 78k0 main board (g-780009 board) external sense probe emulation probe (sold separately)
chapter 1 general user?s manual u14889ej3v0um 11 figure 1-3. IE-78K0-NS-A (two-board type) basic hardware configuration 1-2 host machine interface board (sold separately) interface card (sold separately) dedicated bus interface 78k0 main board (g-780009 board) 78k0 performance board i/o board (ie-78k0 -ns-p0 ) 78k0 series em4 board emulation probe (sold separately) external sense probe IE-78K0-NS-A (2) one-board type (when the 2 nd figure from the left in the serial number is g or later) ? cabinet ? 78k0 main board (g-780009 board) note note this board is different than the previous 78k0 main board in (1) figure 1-4. IE-78K0-NS-A (one-board type) basic hardware configuration 2-1 78k0 main board (g-780009a board) IE-78K0-NS-A 78k0 series em1 board host machine interface board (sold separately) interface board (sold separately) dedicated bus interface emulation probe (sold separately) external sense probe
chapter 1 general user?s manual u14889ej3v0um 12 figure 1-5. IE-78K0-NS-A (one-board type) basic hardware configuration 2-2 78k0 main board (g-780009a board) i/o board (ie-78k0 -ns-p0 ) 78k0 series em4 board IE-78K0-NS-A host machine interface board (sold separately) interface board (sold separately) dedicated bus interface emulation probe (sold separately) external sense probe
chapter 1 general user?s manual u14889ej3v0um 13 1.3 basic specifications table 1-1. list of functions (max. specifications) (1/2) parameter description supervisor v40 (operating frequency: 16.0 mh z ) target device 78k/0 series ( pd780 ) system clock according to specification of emulat ion board (sold separately) external pulse input clock supply internal mounted on emulati on board (sold separately) substitute memory capacity 64 kb internal rom 4 kb internal high-speed ram 64 bytes internal low-speed ram 128 bytes mapping unit external expansion memory 8 kb emulation function ? real-time execution ? break execution ? step execution real-time internal ram monitor 2 kb of memory space event detection ? program execution detection (fetch): 10 (brs1 to brs10) ? bus event detection (access): 12 (bra1 to bra12) event integration ? external trigger detection trigger output (open-drain output (1)) ? path condition (brs1, brs2, or bra1 to bra4) ? trace qualify condition (bra1 to bra4) ? delay condition ? trigger condition (brs1, brs2, or bra1 to bra4) break factors ? event break ? manual break ? command break ? fail-safe break ? external single event inputs (8) ? time out break trace factors ? all traces ? qualify trace (access only) ? section trace (both fetch and access) (interevent trace) note trace capacity 80 bits 8 kb real-time trace trace content address, data, status, 16 external sense traces (8 of whic h (extcn1) can be used as external single event inputs) , time stamp, and snap shot note events use brs3 to brs10 and bra5 to bra12.
chapter 1 general user?s manual u14889ej3v0um 14 table 1-1. list of functions (max. specifications) (2/2) parameter description execution time measurement up to 4 min 28 s, resolution: 62.5 ns interevent time measurement ? resolution: changeable between 160 ns and 20.56 s ? maximum measurement time note when resolution is set to 160 ns: approximately 11 minutes when resolution is set to 20.56 s: approximately 24 hours coverage between 64 kb (read, write, fetch) dmm 16 events note target interface emulation probe (sold separ ately) provided for eac h target device shape host interface dedicated bus interface low-voltage support based on the em ulation board (sold separately) host machine pc-9800 series, or ibm pc/at and compatibles power supply dc 5 v operation temperature range 10 c to 40 c operation humidity range 0% to 80% (no condensation) dimensions w240 d197 h73 (mm) note events use brs3 to brs10 and bra5 to bra12.
chapter 1 general user?s manual u14889ej3v0um 15 1.4 contents in carton the IE-78K0-NS-A carton contains the main unit, cables, an accessory bag, and a guarantee card. make sure that the accessory bag contains a pa cking list, this user?s manual, spacers, and screws. in the case of missing or damaged items, please cont act an nec sales representat ive or nec distributor. figure 1-6. contents in carton <2> ns interface cable <3> fg cable <1> IE-78K0-NS-A <7> guarantee card <6> accessory bag <4> external sense probe <5> external sense clip <1> IE-78K0-NS-A main unit 1 <2> ns interface cable 1 <3> fg cable 1 <4> external sense probes 2 <5> external sense clips 20 (10 per case 2) <6> accessory bag 1 <7> guarantee card 1
chapter 1 general user?s manual u14889ej3v0um 16 check that the accessory bag c ontains the following items (1) two-board type (when the 2 nd figure from the left in the serial number is f or earlier) refer to figure 1-7 contents in accessory bag (when the 2nd figure from the left in the serial number is f or earlier). packing list 1 user?s manual (this manual) 1 metal spacers 5 plastic spacers 2 screws 4 figure 1-7. contents in a ccessory bag, two-board type (when 2nd figure from left in seri al number is f or earlier) (a) packing list (b) user's manual (e) screws (d) plastic spacers (c) metal spacers (2) one-board type (when the 2nd figure from the left side of th e serial number is g or later) refer to figure 1-8 contents in accessory bag (when the 2nd figure from the left in the serial number is g or later). packing list 1 user?s manual (this manual) 1 screws 4 figure 1-8. contents in a ccessory bag, one-board type (when 2nd figure from left in the serial number is g or later) (c) screws (a) packing list (b) user's manual
user?s manual u14889ej3v0um 17 chapter 2 part names this chapter introduces the parts of the
IE-78K0-NS-A main unit. the packing box contains the ie-78k 0-ns-a main unit and accessories. if there are any missing or damaged items, please contact an ne c sales representative. please make sure to fill out and return the guarantee card that comes with the main unit. 2.1 parts of main unit (1) probe end one-board type two-board type t v c c target system power supply led probe interface small: 13 158 mm large: 16 158 mm extcn1 extcn2 external sense probe socket t v c c target system power supply led probe interface small: 13 158 mm large: 16 158 mm extcn1 extcn2 external sense probe socket
chapter 2 part names user?s manual u14889ej3v0um 18 (2) top view power in circuit emulator power supply led (3) interface fg off on reset host-i/f dc in - + reset switch (reset) dedicated bus interface connector (host-i/f) power switch (off/on)
chapter 2 part names user?s manual u14889ej3v0um 19 2.2 board names the IE-78K0-NS-A contai ns the following boards. (1) two-board type (when the 2 nd figure from the left in the serial number is f or earlier.) ? main board (g-780009 board) 1 ? performance board (g-78k0h option board) 1 (2) one-board type (when the 2 nd figure from the left in the serial number is g or later.) ? main board (g-780009a board) 1 caution do not connect the g-78k0h option board to the g-780009a board in case a malfunction may occur. remove the four screws from the si des of the main unit, and then open the top cover to check that you have the correct boards.
chapter 2 part names user?s manual u14889ej3v0um 20 figure 2-1. main board (g- 780009 board) (two-board type) remark the main board is shown mounted in the main unit.
chapter 2 part names user?s manual u14889ej3v0um 21 figure 2-2. performance board (g-78k 0h option board) (two-board type) j1 cn6b p2 cn7b cn4b cn5b p1 extcn1 extcn2 cnjtag1 cn6a cn7a cn4a cn5a < part side > < soldering side > IE-78K0-NS-A
chapter 2 part names user?s manual u14889ej3v0um 22 figure 2-3. main board (g- 780009a board) (one-board type)
chapter 2 part names user?s manual u14889ej3v0um 23 2.3 external sense probe names the IE-78K0-NS-A includes external s ense probes and external sense clips. (1) external sense probes: 2 table 2-1. correspondence between connector no. and color of cable connector no. 1 2 3 4 5 6 7 8 9 10 color of cable brown red orange yellow green blue purple gray n.c. black the names of the external sens e probes when they are connected to extcn1 and extcn2 are as follows. table 2-2. bit configuration when c onnecting external sense probe to extcn1 connector no. 1 2 3 4 5 6 7 8 9 10 external sense ext1 ext2 ext3 ext4 ext5 ext6 ext7 ext8 n.c. gnd table 2-3. bit configuration when c onnecting external sense probe to extcn2 connector no. 1 2 3 4 5 6 7 8 9 10 external sense ext9 ext10 ext11 ext12 ext13 ext14 ext15 ext16 n.c. gnd remark n.c.: no connection (2) external sense clips: 20 (16 for exte rnal sense probe, 2 for gnd, and 2 spares)  made by sunhayato corporation (2 sets of 10) connector no. 10 9 8 7 6 5 4 3 2 1
user?s manual u14889ej3v0um 24 chapter 3 installation this chapter describes how to connect the cabl es to the IE-78K0-NS-A and the mode settings. 3.1 connection connect the following nine products, which are sold separately. refer to figure 1-1 IE-78K0-NS-A system configuration in chapter 1 general for the system configuration of the IE-78K0-NS-A. ? ie-70000-98-if-c: interface board (use cable included with IE-78K0-NS-A) ? ie-70000-pc-if-c: interface board (u se cable included with IE-78K0-NS-A) ? ie-70000-pci-if-a: interface board (u se cable included with IE-78K0-NS-A) ? ie-70000-cd-if-a: pc card interface (use ns card cable) ? ie-70000-mc-ps-b: ac adapter ? ie-780 -ns-em1: emulation board ? ie-780 -ns-em4: emulation board ? ie-78k0-ns-p0 : i/o board ? np- : emulation probe caution connecting and removing cables or compone nts from the target system and changing the settings of switches, etc. should be carried out after turning off the power of the IE-78K0-NS-A main unit and the target system.
chapter 3 installation user?s manual u14889ej3v0um 25 (1) two-board type (when the 2 nd figure from the left in the serial number is f or earlier.) (a) connecting emulation board (ie-780 -ns-em1) the ie-780 -ns-em1 is sold separately. figure 3-1. connecting emulation board (ie-780 -ns-em1) (two-board type) (1/2) <1> remove the screws from the sides of the main unit, and then remove the top cover. <3> fix the spacers (metal) included with the ie- 78k0-ns-a at five points on the board. <4> connect the ie-780 -ns-em1 to the g-78k0h option board and fasten the screws at the four corners. <2> remove the first and second plates from the bottom by removing the screws. caution only when connecting the ie-78018- ns-em1 on the g-78k0h option board, remove spacer 1 (metal) of the following figure and replace spacers 2 and 3 (metal) with the included spacers (plastic). <5> when using a probe, connect the probe. ie-780 -n s-em1 g-78k0h option board refer to (3) for the probe connection method. refer to (4) for the external sense probe connection method. here g-78k0h option board included spacer included spacer fix fix spacers 2 and 3 spacer 1
chapter 3 installation user?s manual u14889ej3v0um 26 figure 3-1. connecting emulation board (ie-780 -ns-em1) (two-board type) (2/2) <6> replace the top co ver and fasten the four screws on the sides. ie-780 -ns-em1 g-78k0h option board
chapter 3 installation user?s manual u14889ej3v0um 27 (b) connecting i/o board (ie-78k0-ns-p0 ) and emulation board (ie-780 -ns-em4) the ie-78k0-ns-p0 and ie-780 -ns-em4 are sold separately. figure 3-2. connecting i/o board and emulation board (ie-780 -ns-em4) (two-board type) (1/2) <1> remove the screws from the sides of the main unit, and then remove the top cover. <3> fix the spacers (metal) included with the ie- 78k0-ns-a at five points on the board. <5> connect the ie-780 -ns-em4 on the ie- 78k0-ns-p0 , and fasten the screws at the four corners. <2> remove the first and third plates from the bottom by removing the screws. <4> connect the ie-78k0-ns-p0 on the g- 78k0h option board and fix the spacers included with the ie-78k0-ns-p0 at the four corners. <6> when using a probe, connect the probe. g-78k0h option board ie-78k0-ns-p0 g-78k0h option board included spacer included spacer fix fix here included spacer included spacer fix fix ie-780 -ns-em4 g-78k0h option board ie-78k0-ns-p0 refer to (3) for the probe connection method. refer to (4) for the external sense probe connection method.
chapter 3 installation user?s manual u14889ej3v0um 28 figure 3-2. connecting i/o board and emulation board (ie-780 -ns-em4) (two-board type) (2/2) <7> replace the top co ver and fasten the four screws on the sides. ie-78k0-ns-p0 g-78k0h option board ie-780 - ns-em4
chapter 3 installation user?s manual u14889ej3v0um 29 (2) one-board type (when the 2 nd figure from the left in the serial number is g or later) (a) connecting emulation board (ie-780 -ns-em1) the ie-780 -ns-em1 is sold separately. figure 3-3. connecting emulation board (ie-780 -ns-em1) (one-board type) (1/2) <1> remove the screws from the sides of the main unit, and then remove the top cover. <3> connect the ie-780-ns-em1 to the g- 780009a board and fasten the screws at the four corners. <4> when using a probe, connect the probe. <2> remove the first plate from the bottom by removing the screws. caution remove the spacer 1 of the following figure only when connecting the ie-78018-ns-em1. <5> replace the top co ver and fasten the four screws on the sides. refer to (3) for the probe connection method. refer to (4) for the external sense probe connection method. ie-780 -ns-em1 g-780009a board ie-780 -ns-em1 g-780009a ? board here spacer ? 1
chapter 3 installation user?s manual u14889ej3v0um 30 (b) connecting i/o board (ie-78k0-ns-p0 ) and emulation board (ie-780 -ns-em4) the ie-78k0-ns-p0 and ie-780 -ns-em4 are sold separately. figure 3-4. connecting i/o board and emulati on board (ie-780-ns-em4 ) (one-board type) <1> remove the screws from the sides of the main unit, and then remove the top cover. <3> connect the ie-78k0-ns-p0 on the g- 780009a board, and fix the spacers included with the ie-78k0-ns-p0 at the four corners. <5> when using a probe, connect the probe. <2> remove the second plate from the bottom by removing the screws. <4> connect the ie-780 -ns-em4 on the ie- 78k0-ns-p0 , and fasten the screws at the four corners. <6> replace the top co ver and fasten the four screws on the sides. ie-78k0-ns-p0 included spacer fix fix included spacer g-780009a board ie-780 -ns-em4 ie-78k0-ns-p0 g-780009a ? board ie-78k0-ns-p0 ie-780 - ns-em4 g-780009a board refer to (3) for the probe connection method. refer to (4) for the external sense probe connection method.
chapter 3 installation user?s manual u14889ej3v0um 31 (3) connecting emulation probe (np- ) the np- is sold separately. (a) two-board type (when the 2nd figure from the left in the serial number is f or earlier) figure 3-5. connecting emulat ion probe (two-board type) emulation probe (np- ) ie-780 -ns-em1 performance board (g-78k0h option board) main board (g-780009 board) emulation probe (np- ) ie-780 -ns-em4 i/o board ie-78k0-ns-p0 main board (g-780009 board) performance board (g-78k0h option board) caution the emulation probe (np- ) mounting location varies depending on the model of the i/o emulation board, ie-780 -ns-emn (n = 1 or 4) in use. for details, refer to the ie-780 -ns- emn user?s manual.
chapter 3 installation user?s manual u14889ej3v0um 32 (b) one-board type (when the 2nd fi gure from the left in the serial number is g or later) figure 3-6. connecting emulat ion probe (one -board type) ie-780 -ns-em1 main board (g-780009a board) emulation probe (np- ) ie-780 -ns-em4 i/o board ie-78k0-ns-p0 main board (g-780009a board) emulation probe (np- ) caution the emulation probe (np- ) mounting location varies depending on the model of the i/o emulation board, ie-780 -ns-emn (n = 1 or 4) in use. for details, refer to the ie-780 -ns- emn user?s manual.
chapter 3 installation user?s manual u14889ej3v0um 33 (4) connecting external sense probe (a) two-board type (when the 2nd figure from the left in the serial number is f or earlier) figure 3-7. connecting external sense probe (two-board type) performance board (g-78k0h option board) external sense probe (included 2) extcn1 extcn2 ground line (black) ground line (black)
chapter 3 installation user?s manual u14889ej3v0um 34 (b) one-board type (when the 2nd fi gure from the left in the serial number is g or later) figure 3-8. connecting external sense probe (one-board type) main board (g -780009a board) extcn1 grand line (black) grand line (black) external sense probe (included 2) extcn2
chapter 3 installation user?s manual u14889ej3v0um 35 (5) connecting ac adapter (ie-70000-mc-ps-b) ie-70000-mc-ps-b is sold separately. <1> insert the plug of the ac adapter (ie-70000-mc-ps-b) into the dc in so cket on the interface side of the ie- 78k0-ns-a. figure 3-9. connecting ac adapter (6) connecting interface cable <1> insert the cable into the bus interf ace connector on the IE-78K0-NS-A main unit. figure 3-10. connecting de dicated bus interface cable fg off on reset host-i/f dc in - + reset switch (reset) dedicated bus interface connector (host-i/f) power switch (off/on) caution the type of interface cable varies depe nding on whether an interface board or a pc card interface is used. ? when using an interface board (ie-70000-98-if -c, ie-70000-pc-if-c, or ie-70000-pci-if(-a)) connect the ns interface cable included with the IE-78K0-NS-A. ? when using a pc card interface (ie-70000-cd-if-a) connect the ns card cable included with the ie-70000-cd-if-a. the ie-70000-98-if-c, ie-70000-pc-if-c, ie-70000- pci-if(-a), and ie-70000-cd-if-a are sold separately. fg power switch (on/off) reset switch (reset) off on reset host-i/f dedicated bus interface connector (host-i/f) dc in - + ac adapter ie-70000-mc-pc-b (sold separately) ac input 80 v to 240 v
chapter 3 installation user?s manual u14889ej3v0um 36 3.2 external trigger functions (1) extout at the occurrence of a break event, the extout pi n on the emulation board out puts a low level for 1.3 s. caution because the output is open drain, conn ect a pull-up resistor in the target system. (2) extin the extin pin on the emulation board c an be used to input an event signal. enter high-level pulse signals for two or more cpu clocks. caution for the electrical specifi cations, refer to table 3-1. table 3-1. electri cal specifications parameter min. [v] max. [v] input voltage, high target voltage 0.7 target voltage input voltage, low 0 target voltage 0.3 3.3 external sense up to 16 bits of data can be input to the IE-78K0-NS-A from the target system via an external sense probe. also, when using an external sense break, i nput a level of at least 2 cpu clocks. table 3-2. electrical specifi cations of external sense parameter min. [v] max. [v] input voltage, high target voltage note 0.7 target voltage note input voltage, low 0 target voltage note 0.3 note 2.0 v when the target voltage is less than 2.0 v.
chapter 3 installation user?s manual u14889ej3v0um 37 3.4 jumper settings (on main board (g-780009 board and g-780009a board)) (1) default jumper settings figure 3-11 shows the position of the jumpers used on the g- 780009 board and the g-780009a board. when changing the settings of jumpers on the g-780009 b oard, remove the five spacers on the g-78k0h option board, and then remove the g-78k0h-option board. for details of the settings, refer to t he user?s manual of each emulation board. figure 3-11. default settings of jp2, jp3, jp4, jp6, jp7, and jp8 135 24 jp6 6 123 jp2 123 jp3 123 jp4 135 24 jp8 6 135 24 jp7 6 jp8: selection of the subsystem clock source (default setting: 1 and 2 shorted) 1 and 2 shorted: internal (m ounted on the emulation board or mounted on the parts board by the user) 3 and 4 shorted: external (input via an emulation probe from the target system) cautions 1. jumper settings di ffer depending on the emulation board . for details, refer to the relevant emulation board user?s manual. 2. set the jumpers on the g-780009 board wh en the IE-78K0-NS-A, two-board type (the 2nd figure from the left side of the serial number is f or earlier), is used. set the jumpers on the g-780009a board wh en the IE-78K0-NS-A, one-board type (the 2nd figure from the left side of the serial number is g or later), is used.
chapter 3 installation user?s manual u14889ej3v0um 38 figure 3-12. part names of g-780009 board cn7 jp6 jp4 jp3 p2 cn6 jp2 tp1 jp8 jp7 cn5 p1 cn4 figure 3-13. part names of g-78000a board cn7 jp6 jp4 jp3 p2 cn6 jp2 tp1 jp8 jp7 cn5 p1 cn4
chapter 3 installation user?s manual u14889ej3v0um 39 3.5 low-voltage emulation settings low-voltage emulation can be executed in the ie-78k0-ns -a by connecting an emulati on board that supports low- voltage operation. (1) when using other than the ie-78018-ns -em1 when the target is at low vo ltage, supply the same supply voltage as that of the target to the ie- 78k0-ns-a tp1 terminal pin on the g-780009 board. (this also applies when the voltage is 5 v.) figure 3-14. position of tp1 on IE-78K0-NS-A cn7 p2 cn6 tp1 cn5 p1 cn4 remark the maximum current consumption of tp1 is from 100 ma (1.8 v) to 300 ma (5 v). (2) when using the ie-78018-ns-em1 when t he target is at low voltage, supply the same supply voltage as that of the target to the tp1 terminal pin on the ie-78018-ns -em1. (this also applies when the voltage is 5 v.) figure 3-15. position of tp1 on ie-78018-ns-em1 cn1 cn2 tp1 remark the maximum current consumption of tp1 is from 100 ma (1.8 v) to 300 ma (5 v). caution for details of the target voltage or m aximum current consumption, refer to the relevant emulation board user?s manual.
user?s manual u14889ej3v0um 40 appendix a interface board (ie-70000-pci-if-a) for desktop pc this chapter describes the setting me thod when connecting the IE-78K0-NS-A. for details, refer to the ie-70000-pci-if-a user?s manual (to be prepared). a.1 introduction the ie-70000-pci-if-a is an interface board for an ie product that is insta lled in the pci bus slot of a pc. first of all, check that you have the following items. ? interface board (ie-70000-pci-if-a) for desktop pc 1 ? 8-bit connector board (connected to ie-70000-pci-if-a) 1 ? 32-bit connector board 1 ? user?s manual 1 ? dll-disk 1 ? ie-pc driver disk 1 ? guarantee card 1 hardware resources used ? i/o address .........0000h to ffffh ? interrupt s.............unused ? memory...............us es 80h bytes current consumption 300 ma (max. when using +5 v) cautions 1. do not place heavy objects on or apply pressure to the board. 2. do not drop the board or subj ect it to excessive vibration or shock. 3. when removing a cable, do not pull it by the cord. 4. do not use or keep the board in a hot, humid or dusty environment or in a location where it is directly exposed to sunlight. 5. avoid subjecting the board to extre me changes in temperature or humidity. 6. do not spill drinks or other li quids onto the board or its accessories. 7. do not connect a cable for a different product to the connector.
appendix a interface board (i e-70000-pci-if-a) for desktop pc user?s manual u14889ej3v0um 41 a.2 installation (1) board settings there are no jumpers or dip s witches on the ie-70000-pci-if-a. (2) 8-bit connector board mounting an 8-bit connector board is premounted at shipment. remark when a 32-bit board is mounted, pl ace it on the 8-bit connector board using the combination connector (refer to figure a-1) and fast en them together with screws. caution the 32-bit connector board is included for future function expansion. figure a-1. mounting of pci board and connector boards ch1 ch0 pci board 32-bit connector board combination connector combination connector combination connector 8-bit connector board (3) installation in pc make sure that the pc is turned off, t hen install the interface board in the pci bus slot following the instructions in the pc?s manual. (4) pci driver installation refer to the supplied ie-pc driver disk readme_e.txt for pci driver installation. (5) connecting with IE-78K0-NS-A using the supplied cable, connect t he IE-78K0-NS-A to the ch0 side. caution connection with the ie-78k0-ns -a is possible on the ch0 side only.
user?s manual u14889ej3v0um 42 appendix b pc card interface (ie-70000-cd-if-a) this chapter describes the setting me thod when connecting the IE-78K0-NS-A. for details, refer to the ie-70000-cd-if-a user?s manual (to be prepared). b.1 introduction the pc card interface (ie-70000-cd-if -a) is an interface card for an ie product that is installed in a pcmcia2.1/jeida standard ver.4. 2-compliant pc card slot. first of all, check that you have the following items. ? pc card interface (ie-70000-cd-if-a) 1 ? mc card cable 1 ? ns card cable 1 ? user?s manual 1 ? dll-disk 1 ? ie-pc driver disk 1 ? guarantee card 1 hardware resources used ? i/o address .........20h bytes starting from 220h, 260h, 2e0h, 320h, or 3e0h as a base address ? interrupt s.............unused ? memory ...............unused current consumption 300 ma (max. when using +5 v) cautions 1. do not place heavy objects on or apply pressure to the board. 2. do not drop the board or subj ect it to excessive vibration or shock. 3. when removing a cable, do not pull it by the cord. 4. do not use or keep the board in a hot, humid or dusty environment or in a location where it is directly exposed to sunlight. 5. avoid subjecting the board to extre me changes in temperature or humidity. 6. do not spill drinks or other li quids onto the board or its accessories. 7. do not connect a cable for a different product to the connector.
appendix b pc card interface (ie-70000-cd-if-a) user?s manual u14889ej3v0um 43 b.2 installation (1) installation in pc insert the pcmcia card in the card slot when the power supply of the pc is turned on. for windows nt tm 4.0, insert the card in the slot when the power supply is turned off. be careful to insert the card in the correct direction. (2) pcmcia driver installation refer to the supplied ie-pc driver disk r eadme_e.txt for pcmcia driver installation. caution this interface card cannot be connected to the ie-78 -r. actually, in stallation ends completely by selecting ?ie-78 -r? displayed in the ie-pc driver disk installation menu. in this case, however, the installation is invalid. (3) connection with the IE-78K0-NS-A using the ns card cable, connect the ie-70000-cd-if-a to the IE-78K0-NS-A. caution be sure to use the ns-a cable when connecting to the ie-78k0- ns-a. if mc card cable is used, the ie-70000-cd-if-a may be damaged.
user?s manual u14889ej3v0um 44 appendix c interface board (ie-70000-98-if-c) for pc-9800 series this chapter describes the setting me thod when connecting the IE-78K0-NS-A. for details, refer to the ie-70000-98-if-c user?s manual (to be prepared). c.1 introduction the ie-70000-98-if-c is an inte rface board for the pc-9800 seri es that is installed in the c bus slot of a pc-9800 series machine. caution the pc98-nx series is treated as an ibm pc/at compatible machine. refer to appendix a interface board (ie-70000-pci-if(-a)) for desktop pc. first of all, check that you have the following items. ? interface board (ie-70000-98-if-c) for pc-9800 series 1 ? user?s manual 1 ? dll-disk 1 ? ie-pc driver disk 1 ? guarantee card 1 applicable models this product is designed for devices incorporating a pc-9800 series c bus. hardware resources used ? i/o addresses .............. 16 bytes at a 256-byte boundary (00d h, 01d h,...ffd h) ? interrupts and others.... unused current consumption 500 ma (max. when using + 5 v) cautions 1. do not place heavy objects on or apply pressure to the board. 2. do not drop the board or subj ect it to excessive vibration or shock. 3. when removing a cable, do not pull it by the cord. 4. do not use or keep the board in a hot, humid or dusty environment or in a location where it is directly exposed to sunlight. 5. avoid subjecting the board to extre me changes in temperature or humidity. 6. do not spill drinks or other li quids onto the board or its accessories. 7. do not connect a cable for a different product to the connector.
appendix c interface board (ie-70000-98-if-c) for pc-9800 series user?s manual u14889ej3v0um 45 c.2 installation (1) i/o address settings sw1 and sw2 are the s witches selecting the c bus i/o addresses. sw1 numbers 1 to 8 correspond to c bus addresses a4 to a11, and sw2 numbers 1 to 4 correspond to c bus addresses a12 to a15. in the IE-78K0-NS-A, the addresses s hould be set in the 16 bytes between 00d h and ffd h. the switch takes the value ?0? when on and ?1? when off. the addresses used for setup must be val ues that are not used in the pc system or for other boards. in addition, since these values are used during software installati on, make a note of them for future reference. setting examples of i/o address, sw1 and sw2 are shown below. table c-1. sw1 and sw2 settings when setting i/o address to 01d h sw1 number 1 2 3 4 5 6 7 8 address a4 a5 a6 a7 a8 a9 a10 a11 on 0 0 0 0 off 1 1 1 1 sw2 number 1 2 3 4 5 6 7 8 address a12 a13 a14 a15 off off on off on 0 0 0 0 0 off 1 1 1 caution set sw2 number 7 to on and sw 2 numbers 5, 6, and 8 to off.
appendix c interface board (ie-70000-98-if-c) for pc-9800 series user?s manual u14889ej3v0um 46 (2) jumper settings the int jp and wait jp are c bus in terrupt and wait selection jumpers. in the IE-78K0-NS-A, set int jp to no use, and wait jp to 1 and 2 shorted. figure c-1. int jp, wait jp settings 12 wait jp 3 : shorted 12 int jp shorted no use ir3 ir5 ir6 ir9 ir11 ir12 ir13 (3) installation in pc make sure that the pc is turned off, then install the interface boar d in the c bus slot follo wing the instructions in the pc?s manual. (4) connecting with IE-78K0-NS-A using the supplied cable, connec t the IE-78K0-NS-A to ch0. caution connection with the IE-78K0-NS-A is possible to ch0 only. for connection with other models, refer to their respective manuals.
user?s manual u14889ej3v0um 47 appendix d interface board (ie-70000-pc -if-c) for ibm pc/at and compatibles this chapter describes the setting me thod when connecting the IE-78K0-NS-A. for details, refer to the ie-70000-pc-if-c user?s manual (to be prepared). d.1 introduction the ie-70000-pc-if-c is an interface board for ibm pc/at co mpatibles and is installed in the isa bus slot of an ibm pc/at compatible. first of all, check that you have the following items. ? interface board (ie-70000-pc-if-c) for ibm pc/at 1 ? user?s manual 1 ? ie-pc driver disk 1 ? dll-disk 1 ? guarantee card 1 applicable models the ie-70000-pc-if-c is designed for ibm pc/a t compatibles incorporating an isa bus. hardware resources ? i/o address .................. 16 bytes at any 16-byte boundary (020 h to 03f h) ? interrupts and others ... unused current consumption 500 ma (max. when using + 5 v) cautions 1. do not place heavy objects on or apply pressure to the board. 2. do not drop the board or subj ect it to excessive vibration or shock. 3. when removing a cable, do not pull it by the cord. 4. do not use or keep the board in a hot, humid or dusty environment or in a location where it is directly exposed to sunlight. 5. avoid subjecting the board to extre me changes in temperature or humidity. 6. do not spill drinks or other li quids onto the board or its accessories. 7. do not connect a cable for a different product to the connector.
appendix d interface board (ie-70000-pc -if-c) for ibm pc/at and compatibles user?s manual u14889ej3v0um 48 d.2 installation (1) i/o address settings sw1 and sw2 are the switches select ing the isa bus i/o addresses. sw1 numbers 1 to 8 correspond to isa bus addresses a4 to a11, and sw2 numbers 1 to 4 correspond to isa bus addresses a12 to a15. in the IE-78K0-NS-A, the addresses should be set between 020 h and 03f h. the switch takes the value ?0? when on and ?1? when off. the addresses used for setup must be val ues that are not used in the pc system or for other boards. in addition, since these values are used during software installati on, make a note of them for future reference. setting examples of i/o address, sw1 and sw2 are shown below. table d-1. sw1 and sw2 settings when setting i/o address to 020 h sw1 number 1 2 3 4 5 6 7 8 address a4 a5 a6 a7 a8 a9 a10 a11 on 0 0 0 0 0 0 0 off 1 sw2 number 1 2 3 4 5 6 7 8 address a12 a13 a14 a15 off off on off on 0 0 0 0 0 off 1 1 1 caution set sw2 number 7 to on and sw2 numbers 5, 6, and 8 to off.
appendix d interface board (ie-70000-pc -if-c) for ibm pc/at and compatibles user?s manual u14889ej3v0um 49 (2) jumper settings the int jp and wait jp are isa bus in terrupt and wait selection jumpers. in the IE-78K0-NS-A, set int jp to no use, and wait jp to 1 and 2 shorted. figure d-1. int jp, wait jp settings 12 wait jp 3 : shorted 12 int jp no use shorted irq2 irq3 irq4 irq5 irq6 irq7 (3) installation in pc make sure that the pc is turned off, t hen install the interface board in the isa bus slot follo wing the instructions in the pc?s manual. (4) connecting with IE-78K0-NS-A using the supplied cable, connec t the IE-78K0-NS-A to ch0. caution connection with the IE-78K0-NS-A is possible to ch0 only. for connection with other models, refer to their respective manuals.
user?s manual u14889ej3v0um 50 appendix e revision history a history of the revisions up to this edition is shown bel ow. ?applied to:? indicates the chapters to which the revision was applied. edition major revisions from previous edition applied to: change of interface board for desktop pc from ie-70000-pci-if to ie-70000-pci-if-a throughout modification of figure 1-1 IE-78K0-NS-A system configuration chapter 1 general a.1 introduction ? deletion of applicable models appendix a 2nd b.1 introduction ? deletion of applicable models appendix b 3rd addition of the description of the g-780009a board throughout the mark shows major revised points.


▲Up To Search▲   

 
Price & Availability of IE-78K0-NS-A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X