crystal clock oscillator technical data st410h series 3.3 & 5v, hcmos, acmos, ttl, smd ds-184 rev d saronix 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 www.saronix.com saronix frequency range: description actual size a crystal controlled, low-current oscilla- tor providing precise rise and fall times to drive ttl compatible or hcmos/ acmos loads. the tri-state function enables the output to go high impedance. comes in industry standard plastic smd package. 32 mhz to 125 mhz frequency stability: 50 or 100 ppm over all conditions of operating temperature, rated (input) supply voltage changes, load changes, calibration tolerance, aging*, shock and vibration. temperature range: operating: storage: 0 to +70c or -40 to +85c -55 to +125c supply voltage: recommended operating: +5v 10% or 3.3v 10% supply current: 65ma max, 50ma typ @ 5v, 35ma max @ 3.3v output drive: * 1 year @ +40c average ambient operating temperature applications & features suited for use with new hcmos/ acmos mpu's, fiber channel and gigabit ethernet applications broad frequency range 32 mhz to 125 mhz 3.3 or 5v version matches eia standard so-j-20 footprint high drive acmos and hcmos ca- pability tri-state output standard short circuit protected output also available in full & half-size st4100 metal series, see separate data sheet see st410r series for same size equiva- lent substitute in more economical fr4 package available on tape & reel; 24mm tape, 1000pcs per reel symmetry: 45/55% (32 to 125mhz, 0 to +70c) 45/55% (32 to 60mhz, -40 to +85c) 45/55% (60+ to 125mhz, -40 to +85c, 3.3v) 40/60% (60+ to 125mhz, -40 to +85c, 5v) 2ns max 20% to 80% v dd (acmos); 1.5ns max 0.5 to 2.5v (ttl) 10% v dd max (5v); 20% v dd max (3.3v) 80% v dd min 50 ? acmos (5v); 95 ? acmos (3.3v) 13ps max 32 to 72 mhz 20ps max 72+ to 125 mhz, 0 to +70c 25ps max 72+ to 125 mhz, -40 to +85c rise & fall times: logic 0: logic 1: load: period jitter rms: mechanical: mil-std-883, method 2002, condition b mil-std-883, method 2003 mil-std-833, method 2004, condition b2 mil-std-883, method 2007, condition a mil-std-202, method 215 mil-std-202, method 210, condition i or j shock: solderability: terminal strength: vibration: solvent resistance: resistance to soldering heat: environmental: thermal shock: moisture resistance: mil-std-883, method 1011, condition a mil-std-883, method 1004 part numbering guide st41 3 h b ? 125.0000 (t) series type 3 = 3.3v acmos 5 = 5v ttl 6 = 5v acmos stability tolerance b = 50 ppm, 0 to +70c c = 100 ppm, 0 to +70c f = 100 ppm, -40 to +85c package style h = plastic smd frequency tri-state control characteristics: oscillation (pin 3): high impedance (pin 3): internal pullup resistance: disable output delay: v in 2.2v or open (pin 1) v in 0.8v or gnd (pin 1) 50k ? min 100nsec max (t) = tape & reel full reel increments only blank = bulk packaged
all specifications are subject to change without notice. crystal clock oscillator technical data st410h series 3.3 & 5v, hcmos, acmos, ttl, smd ds-184 rev d saronix 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 www.saronix.com saronix package details, type h test circuits output waveform ma m power supply v m v cc oscillator pin 3 pin 2 .01 f out gnd 0.01 f 56 ? 450 ? test point 50 ? oscilloscope termination tri-state input (current limited on fixture) acmos 50 ? load ma m power supply v m acmos 95 ? load 0.01 mfd 95 ? test point v cc oscillator pin 3 pin 2 out gnd .01 f tri-state input (current limited on fixture) pin 1: tri-state control (v in ) pin 2: gnd pin 3: output pin 4: vdc pin function: 2.0 .079 8.95 .352 9.80 .386 max 13.0 .512 max 4.7 .185 max 4.10 .161 0.51 .020 5.08 .200 0.15 .006 7.62 .300 0.25 .010 recommended land pattern 2 1 43 pin 4 pin 1 pin 4 pin 1 50 ? ? ? ? ? acmos test circuit 95 ? ? ? ? ? acmos test circuit 2.5 vdc 1.5 vdc 0.5 vdc t f t f t r t r cmos ttl symmetry symmetry gnd v dd logic 0 20% v dd 50% v dd 80% v dd logic 1 * scale: none ( dimensions in ) mm inches * external high frequency power supply decoupling required. 1.78 .070 2.82 .111 12 43 5.08 .200 7.80 .307 saronix yyww 50.0000 mhz ST413Hc solder reflow guide preheat 183 10c 4c/sec max reflow 240 max cooling 4c/sec max 1 ? 2 minutes time 10 sec max 150 200 250 temperature ? c
|
