Part Number Hot Search : 
C3200 32LD320N GRM1555C S25A3100 1N4106 SP207BCT HEF40 10165N
Product Description
Full Text Search
 

To Download CS9AUJ Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  clock page 1 of 3 raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a. phone: (305) 593-6033 fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com cs9/csp series: clock oscillator, pecl, +3.3 vdc or +2.5vdc description: a crystal controlled, high frequency, highly stable oscillator, adhering to positive emitter coupled logic (pecl) standards. the output can be tri-stated to facilitate testing or combined multiple clocks. the device is contained in a sub-miniature, very low profile, leadless ceramic smd package with 6 gold contact pads. this miniature oscillator is ideal for today's automated assembly environments. applications and features: infiniband; 10gbe; network processors; soho routing; switches; wan interfaces common frequencies: 106.25 mhz; 125 mhz; 150 mhz; 155.52 mhz; 156.25 mhz; 161.1328 mhz +3.3 vdc or +2.5vdc pecl frequency range from 50.000 to 315 mhz no multiplication miniature ceramic smd package available on tape and reel lead free and rohs compliant absolute maximum ratings: parameter symbol value unit operating temperature range ta -40?+85 c storage temperature range t(stg) -55?+90 c supply voltage vcc -0.5?+5.0 vdc maximum input voltage vi vss-0.5?vcc+0.5 vdc maximum output voltage vo vss-0.5?vcc+0.5 vdc electrical parameters: parameter symbo l test conditions *1 value unit nominal frequency fo 50.000 ~ 315.00** mhz supply voltage vcc +3.3 or +2.5 5% vdc supply current is 80.0 max ma output logic type pecl load connected between each output and vcc ? 2.0 vdc 50 ? output voltage levels voh vol min max vcc-1.025 vcc-1.620 vdc vdc duty cycle dc measured at 50% of vcc 40/60 to 60/40 or 45/55 to 55/45 % rise / fall time tr / tf measured at 20/80% and 80/20% vcc levels 0.5 typ *2 ns integrated phase tji rms, fj = 12 khz?20 mhz 0.3 typ** ps integrated phase rms tii offset frequency 50khz to 80mhz 0.5 typ** ps deterministic period jitter tdj using wavecrest analyz. 0.0typ ** ps random period jitter trj using wavecrest analyz. 2.5 typ ** ps jitter j peak to peak jitter tp-p using wavecrest analyz. 25 typ** ps phase noise typ. @155.52mhz ( ? f) ( ? f) ( ? f) ( ? f) ? f= 10 hz ? f= 1 khz ? f= 10 khz ? f= >/=100 khz -65 -120 -140 -145 dbc/hz dbc/hz dbc/hz dbc/hz overall frequency stability ? f/fc op. temp., aging, load, supply and cal. variations 20, 25, 50, or 100 max *3 ppm pin 1 output enabled output disabled en dis high voltage or no connect ground 0.7 ? vcc min 0.3 ? vcc max vdc vdc *1 test conditions unless stated otherwise: nominal vcc, nominal load, +25 3 c *2 frequency dependent *3 not all stabilities available with all temperature ranges?please consult factory for availability
clock page 2 of 3 raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a. phone: (305) 593-6033 fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com 123 4 5 6 . 1 9 7 . 0 0 8 .276 .008 7.0 0.2 5 . 0 0 . 2 indicates pin 1. .079 max. 2.00 max. .200 .100 5.08 2.54 . 1 5 0 3 . 8 1 .055 1.40 typ. . 0 5 0 1 . 2 7 .079 typ. 2.00 typ. .100 2.54 .071 1.80 solder pattern 2.20 .087 part numbering system: series symmetry temperature range (c) frequency stability (overall) frequency (mhz) cs9: +3.3vdc clock with pecl comp. output csp: +2.5vdc clock with pecl comp. output a: 40/60 to 60/40% t: 45/55 to 55/45% r: 0?+50 s: 0?+70 u: -20?+70 v: -40?+85** k: 20 ppm** i: 25 ppm** h: 50 ppm j: 100 ppm 50.000?315.000 example: cs9ash-155.520 clock oscillator, 7x5mm package, +3.3 vdc supply voltage, pecl output, standard symmetry, 0?+70 c operating temperature range, 50 ppm total frequency stability, 155.520 mhz **above 300mhz extended temp range and 25ppm stability may not be available, jitter may vary upon spec requirements. please consult the factory for any custom requirements. mechanical parameters: outline tolerance: 0.006? / 0.15mm (unless otherwise specified) pin functions: [1] enable/ disable [2] no connect [3] case ground [4] output [5] comp. output [6] supply voltage marking: cs9ash 155.52 ral d/c *0.01 f external by-pass filter is recommended as seen on solder pattern.
clock page 3 of 3 raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a. phone: (305) 593-6033 fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com reflow profile: **rohs compliant**


▲Up To Search▲   

 
Price & Availability of CS9AUJ

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X