description this family of smt leds is packaged in the industry standard plcc-2 package. these smt leds have high reliability performance and are designed to work under a wide range of environmental conditions. this high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. to facilitate easy pick & place assembly, the leds are packed in eia-compliant tape and reel. every reel will be shipped in single intensity and color bin. these leds are compatible with ir solder reflow process. the super wide viewing angle at 120 makes these leds ideally suited for panel, push button, or general backlighting in automotive interior, ofce quipment, industrial equipment, and home appliances. the fat top emitting surface makes it easy for these leds to mate with light pipes. with the built-in refector pushing up the intensity of the light output, these leds are also suitable to be used as led pixels in interior electronic signs. the super high brightness white plcc-2 smt led is ideal for all kinds of backlighting applications in interior automotive, office automation, electrical appliance and industrial instrument markets to ofer a clear and attractive product differentiation. the wide viewing angle at 120?also enables this white plcc-2 smt led to be used in localised area ambience lighting in applications such as vanity mirror light, cabin light, and car door puddle light. the white color backlighting of - fered by this series of white plcc-2 smt led is suitable to backlight color lcd screen in applications such as gps (global positioning system) screens in cars. hsmw-a10x-xxxxx white surface mount led indicator smt plcc-2 data sheet caution: hsmw-a10x leds are class 2 esd sensitive. please observe appropriate precautions during handling and processing. refer to avago technologies application note an-1142 for additional details. features ? industry standard plcc-2 package (plastic leaded chip carrier) ? super high reliability led package ? tight white color binning ? super wide viewing angle at 120? ? available in 8 mm carrier tape on 7-inch reel (2000 pieces) ? compatible with ir and ttw soldering process applications ? interior automotive C instrument panel backlighting C central console backlighting C cabin backlighting ? ofce automation, home appliances, industrial equipment C front panel backlighting C push button backlighting C display backlighting
2 package dimensions part numbering system hsm x 1 Ca x 2 x 3 x 4 - x 5 x 6 x 7 x 8 x 9 packaging 0ption color bin selection intensity bin select device specifc confguration package type led chip color device selection guide color part number min. i v (mcd) typ. i v (mcd) max. i v (mcd) test current (ma) dice technology white hsmw-a101-r50j1 100.00 - 395.00 20 ingan HSMW-A100-T50J1 250.00 - 1000.00 20 ingan note: 1. the luminous intensity i v , is measured at the mechanical axis of the lamp package. the actual peak of the spatial radiation pattern may not be aligned with this axis. 0.80 (0.031) 3.50 (0.138) 2.80 (0.110) 3.20 (0.126) 2.20 (0.087) 1.90 (0.073) 0.05 (0.002) 0.80 (0.031) cathode marking note: all dimensions in millimeters (inches).
3 absolute maximum ratings (t a = 25c) parameters hsmw dc forward current [1] 30 ma peak forward current [2] 90 ma power dissipation 114 mw reverse voltage 5 v junction temperature 110c operating temperature C40c to +100c storage temperature C40c to +100c notes: 1. derate linearly as shown in figure 4. 2. duty factor = 10%, frequency = 1 khz. optical characteristics (t a = 25c) luminous luminous intensity/ typ. chromaticity viewing angle efcacy, h v [3] total flux dice coordinates [1] 2 q 1/2 [2] (degrees) (lm/w) i v (mcd)/ f v (lm) color part number technology x y typ. typ. typ. white hsmw-a10x ingan 0.31 0.31 120 260 0.45 notes: 1. the chromaticity coordinates are derived from the cie 1931 chromaticity diagram and represent the perceived color of the device. 2. 1/2 is the of-axis angle where the luminous intensity is 1/2 the peak intensity. 3. radiant intensity, i e in watts/steradian, may be calculated from the equation i e = i v / v , where i v is the luminous intensity in candelas and v is the luminous efcacy in lumens/watt. electrical characteristics (t a = 25c) part forward voltage, v f (volts) @ i f = 20 ma reverse voltage, v r @ 10 a thermal resistance number typ. max. min. r jp (c/w) hsmw 3.4 4.05 5 280
4 0 3 .0 forward voltage - v 0 10 30 35 forward current - m a 5 20 15 25 1. 0 2 .0 3. 5 0. 5 1 .5 2. 5 4 .0 0 2 0 dc forward current - ma 0 0.4 1.6 relative luminous intensity (normalized at 20 ma) 35 0.8 0.2 1.0 10 0.6 1.2 25 5 1 5 3 0 1.4 -0.003 0.020 -0.010 -0.002 0 0.001 0.003 y-coordinates x-coordinates -0.001 0.010 0.015 0.005 0 0.002 -0.005 5 ma 10 ma 20 ma 30 ma 0 35 0 20 60 80 120 current - ma temperature - c 40 20 25 15 10 30 100 5 normalized intensity 1.0 0 angular displacement - degrees 0.8 0.6 0.2 0.4 -70 -50 -30 0 2 0 3 0 5 0 7 0 9 0 -90 -20 -80 -60 -40 -10 10 40 60 80 figure 4. maximum forward current vs. ambient temperature. derated based on t j max = 110c, r q ja = 500c/w. figure 1. forward current vs. forward voltage figure 2. relative intensity vs. forward current. figure 3. chromaticity shift vs. currrent. note: (x,y) values @ 20 ma reference to (0.0) figure 5. radiation pattern.
5 2.60 4.50 1.50 solder resist 240 c max. 20 sec. max. 3 c/sec. max. 120 sec. max. time temperature 183 c 100-150 c e6 c/sec. max. 60-150 sec. 3 c/sec. max. 217 c max. 120 sec. 6 c/sec. max. 3 c/sec. max. 125 c 25 c 255 c 60 to 150 sec. 10 to 20 sec. time tempera ture * the time from 25 c to peak tempera ture = 6 minutes max. +5 c -0 c preheat fluxing 0 6 0 time e seconds 0 100 30 temperature e c 50 200 150 250 20 40 70 10 30 50 80 90 100 turbulent wave laminar wave bottom side of pc board top side of pc board hot air knife conveyor speed = 1.83 m/min (6 ft/min) preheat setting = 150 c (100 c pcb) solder wave temperature = 245 c air knife temperature = 390 c air knife distance = 1.91 mm (0.25 in.) air knife angle = 40 solder: sn63; flux: rma note: allow for boards to be sufficiently cooled before exerting mechanical force. figure 6a. recommended snpb refow soldering profle. figure 7. recommended wave soldering profle. figure 8. recommended soldering pad pattern. figure 6b. recommended pb-free refow soldering profle. note: for detail information on refow soldering of avago surface mount leds, do refer to avago application note an 1060 surface mounting smt led indicator components.
6 200 mm min. for 180 reel. 200 mm min. for 330 reel. trailer component leader 480 mm min. for 180 reel. 960 mm min. for 330 reel. c a user feed direction c a 4 0. 1 4 0. 1 2 0.05 3.05 0. 1 3.5 0.05 8 +0. 3 - 0. 1 1.75 0.1 3.81 0. 1 2.29 0. 1 0.229 0.01 8 1. 5 +0. 1 -0 1 +0. 1 - 0 figure 9. tape leader and trailer dimension. figure 10. tape dimension.
7 14.4 (max. measured at hub) 7.9 (min.) 10.9 (max.) 62.5 2 +0.5 - 0 ? 20.5 0.3 ? 13 0.2 +0 - 2.5 8.4 (measured at outer edge) +1.50 - 0.00 180 label area (111 mm x 57 mm ) with depression (0.25 mm) cathode side printed label user feed direction figure 11. reel dimensions. figure 12. reeling orientation. moisture sensitivity this product is qualifed as moisture sensitive level 2a per jedec j-std-020. precautions when handling this moisture sensitive product is important to ensure the reli - ability of the product. do refer to avago application note an5305 handling of moisture sensitive surface mount devices for details. a. storage before use - unopen moisture barrier bag (mbb) can be stored at <40c/90%rh for 12 months. if the actual shelf life has exceeded 12 months and the hic indicates that baking is not required, then it is safe to refow the leds per the original msl rating. - it is not recommended to open the mbb prior to assembly (e.g. for iqc). b. control after opening the mbb - the humidity indicator card (hic) shall be read immediately upon opening of mbb. - the leds must be kept at <30c / 60%rh at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours. c. control for unfnished reel - for any unuse leds, they need to be stored in sealed mbb with desiccant or desiccator at <5%rh. d. control of assembled boards - if the pcb soldered with the leds is to be subjected to other high temperature processes, the pcb need to be stored in sealed mbb with desiccant or desiccator at <5%rh to ensure no leds have exceeded their foor life of 672 hours. e. baking is required if: - 10% or 15% hic indicator turns pink. - the leds are exposed to condition of >30c / 60% rh at any time. - the leds foor life exceeded 672 hours. recommended baking condition: 605c for 20 hours.
for product information and a complete list of distributors, please go to our website: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies limited in the united states and other countries. data subject to change. copyright ? 2007 avago technologies limited. all rights reserved. obsoletes av01-0645en av02-0490en - june 19, 2007 intensity bin select (x 5 x 6 ) individual reel will contain parts from one half bin only. x 5 min i v bin x 6 0 full distribution 3 3 half bins starting from x 5 1 4 4 half bins starting from x 5 1 5 5 half bins starting from x 5 1 7 3 half bins starting from x 5 2 8 4 half bins starting from x 5 2 9 5 half bins starting from x 5 2 intensity bin limits bin id min. (mcd) max. (mcd) q1 71.50 90.00 q2 90.00 112.50 r1 112.50 140.00 r2 140.00 180.00 s1 180.00 224.00 s2 224.00 285.00 t1 285.00 355.00 t2 355.00 450.00 u1 450.00 560.00 u2 560.00 715.00 v1 715.00 900.00 v2 900.00 1125.00 tolerance of each bin limit = 12%. color bin limits bin id limits (chromaticity coordinates) a x 0.352 0.365 0.365 0.352 y 0.377 0.395 0.360 0.341 b x 0.340 0.352 0.352 0.340 y 0.360 0.377 0.341 0.325 c x 0.327 0.340 0.340 0.327 y 0.342 0.360 0.325 0.306 d x 0.315 0.327 0.327 0.315 y 0.325 0.342 0.306 0.290 e x 0.302 0.315 0.315 0.302 y 0.307 0.325 0.290 0.271 f x 0.290 0.302 0.302 0.290 y 0.290 0.307 0.271 0.255 packaging option (x 8 x 9 ) option test package reel current type size j1 20 ma top 7 inch mount j2 10 ma top 7 inch mount figure 14. color bin select (x 7 ) individual reel will contain parts from one full bin only. x 7 0 full distribution z a and b only y b and c only w c and d only v d and e only u e and f only q a, b and c only p b, c and d only n c, d and e only m d, e and f only 1 a, b, c and d only 3 b, c, d and e only 4 c, d, e and f only 5 a, b, c, d and e only 6 b, c, d, e and f only note: tolerance for each bin limit = 0.02. 0.25 0.40 0.25 0.30 0.40 y-coordinate x-coordinate 0.35 0.30 0.35 f e d c b a
|
