specification te -module PE-241-10-13 issue 2 issued: 29/05/2008 1 / 2 specification product thermoelectric module part number PE-241-10-13 1 scope 1 1 this specification is applied to multicomp thermoelectric modules 1 2 revision of these specifications is carried out after consent. 2 specification 2 1 parameters parameters remarks internal resistance 6.8 ? 10% note-1 imax. 3.9 a note-2 vmax. 29.9 v note-3 th=25 qmax. 71.8 w note-4 Stmax. 74 note-5 solder melting point 138 note-6 maximum. compress . 1mpa note-7 note-1 measured by ac 4-terminal method at 25 . note-2 maximum current at S tmax. note-3 maximum voltage at S tmax. note-4 maximum cooling capacity at imax.,vmax. and St 0 . note-5 maximum temperature difference at imax.,vmax. and q 0w. maximum parameters are me asured in a vacuum 1.3p note-6 the solder melting point of thermoelectric module note-7 recommended maximum compression (not destruction limit)
2 -2 recommendations: - maximum temperature for short time: 110 - operation temperature up to 90 for long lifetime; - good reliability in on-off mode - recommended operation current not higher than 0.7 of imax 3 performance graph
|