lm139, lm139a, lm239, lm239a, lm339, lm339a, lm2901 quad differential comparators slcs006f ? october 1979 ? revised november 2001 1 post office box 655303 ? dallas, texas 75265 single supply or dual supplies wide range of supply voltage ...2 v to 36 v low supply-current drain independent of supply voltage . . . 0.8 ma typ low input bias current . . . 25 na typ low input offset current ...3 na typ (lm139) low input offset voltage ...2 mv typ common-mode input voltage range includes ground differential input voltage range equal to maximum-rated supply voltage . . . 36 v low output saturation voltage output compatible with ttl, mos, and cmos package options include plastic small-outline (d, ns), shrink small-outline (db), thin shrink small-outline (pw), and ceramic dual flatpack (w) packages, ceramic chip carriers (fk), and standard plastic (n) and ceramic (j) dips description these devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. operation from dual supplies also is possible as long as the difference between the two supplies is 2 v to 36 v and v cc is at least 1.5 v more positive than the input common-mode voltage. current drain is independent of the supply voltage. the outputs can be connected to other open-collector outputs to achieve wired-and relationships. the lm139 and lm139a are characterized for operation over the full military temperature range of ?55 c to 125 c. the lm239 and lm239a are characterized for operation from ?25 c to 125 c. the lm339 and lm339a are characterized for operation from 0 c to 70 c. the lm2901 is characterized for operation from ?40 c to 125 c. symbol (each comparator) out in? in+ please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. copyright ? 2001, texas instruments incorporated production data information is current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. 1 2 3 4 5 6 7 14 13 12 11 10 9 8 1out 2out v cc 2in? 2in+ 1in? 1in+ out3 out4 gnd 4in+ 4in? 3in+ 3in? d, db, j, n, ns, pw, or w package (top view) 3212019 910111213 4 5 6 7 8 18 17 16 15 14 gnd nc 4in+ nc 4in? v cc nc 2in? nc 2in+ 2out 1out nc 3in? 3in+ 3out 4out 1in? 1in+ nc fk package (top view) nc ? no internal connection on products compliant to mil-prf-38535, all parameters are tested unless otherwise noted. on all other products, production processing does not necessarily include testing of all parameters.
lm139, lm139a, lm239, lm239a, lm339, lm339a, lm2901 quad differential comparators slcs006f ? october 1979 ? revised november 2001 2 post office box 655303 ? dallas, texas 75265 available options packaged devices t a v io (max) at 25 c plastic soic (d, ns) plastic ssop (db) ceramic chip carrier (fk) ceramic dip (j) plastic dip (n) plastic tssop (pw) ceramic dual flatpack (w) 0 c to 70 c 5 mv 5 mv 2 mv 2 mv lm339d lm339ns lm339ad lm339ans lm339dbr ? ? ? ? ? lm339n ? lm339an ? lm339pwr ? ? ? ? 25 cto85 c 5 mv lm239d lm239n ? 25 c to 85 c 2 mv lm239ad ? ? ? lm239an ? ? ? 40 c to 125 c 7 mv 7 mv lm2901d lm2901ns LM2901DBR ? ? lm2901n lm2901pwr ? 55 cto125 c 5 mv lm139d lm139fk lm139j lm139w ? 55 c to 125 c 2 mv lm139ad ? lm139afk lm139aj ? ? lm139aw the d and ns packages are available taped and reeled. add the suffix r to the device type (e.g., lm339dr). the db and pw packag es are only available taped and reeled. schematic (each comparator) 80- a current regulator 80 a gnd out v cc 10 a 60 a 10 a in+ in ? all current values shown are nominal.
lm139, lm139a, lm239, lm239a, lm339, lm339a, lm2901 quad differential comparators slcs006f ? october 1979 ? revised november 2001 3 post office box 655303 ? dallas, texas 75265 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) ? supply voltage, v cc (see note 1) 36 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . differential input voltage, v id (see note 2) 36 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input voltage range, v i (either input) ? 0.3 v to 36 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . output voltage, v o 36 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . output current, i o 20 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . duration of output short circuit to ground (see note 3) unlimited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . package thermal impedance, ja (see note 4): d package 86 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . db package 96 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n package 80 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ns package 76 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pw package 113 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . continuous total dissipation see dissipation rating table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . case temperature for 60 seconds: fk package 260 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: d, db, n, or pw package 260 c . . . . . . . . lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: j package 300 c . . . . . . . . . . . . . . . . . . . . . storage temperature range, t stg ? 65 c to 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ? stresses beyond those listed under ? absolute maximum ratings ? may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under ? recommended operating conditions ? is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. notes: 1. all voltage values, except differential voltages, are with respect to network ground. 2. differential voltages are at in+ with respect to in ? . 3. short circuits from outputs to v cc can cause excessive heating and eventual destruction. 4. the package thermal impedance is calculated in accordance with jesd 51-7. dissipation rating table package t a 25 c power rating derating factor derate above t a t a = 70 c power rating t a = 85 c power rating t a = 125 c power rating fk 900 mw 11 mw/ c 68 c 880 mw 715 mw 275 mw j 900 mw 11 mw/ c 68 c 880 mw 715 mw 275 mw
lm139, lm139a, lm239, lm239a, lm339, lm339a, lm2901 quad differential comparators slcs006f ? october 1979 ? revised november 2001 4 post office box 655303 ? dallas, texas 75265 electrical characteristics at specified free-air temperature, v cc = 5 v (unless otherwise noted) parameter test conditions ? t ? lm139 lm139a unit parameter test conditions ? t a ? min typ max min typ max unit v io in p ut offset voltage v cc = 5 v to 30 v, v ic =v icr (min) 25 c 2 5 1 2 mv v io input offset voltage v ic = v icr (min) , v o = 1.4 v full range 9 4 mv i io in p ut offset current v o =14v 25 c 3 25 3 25 na i io input offset current v o = 1 . 4 v full range 100 100 na i ib in p ut bias current v o =14v 25 c ? 25 ? 100 ? 25 ? 100 na i ib input bias current v o = 1 . 4 v full range ? 300 ? 300 na v icr common-mode 25 c 0 to v cc ? 1.5 0 to v cc ? 1.5 v v icr input-voltage range full range 0 to v cc ? 2 0 to v cc ? 2 v a vd large-signal differential-voltage amplification v cc = 7.5 v, v o = ? 5 v to 5 v 25 c 200 50 200 v/mv i oh hi g h-level output v id =1v v oh = 5 v 25 c 0.1 0.1 na i oh g current v id = 1 v v oh = 30 v full range 1 1 a v ol low-level output v id = 1v i ol =4ma 25 c 150 400 150 400 mv v ol voltage v id = ? 1 v , i ol = 4 ma full range 700 700 mv i ol low-level output current v id = ? 1 v, v ol = 1.5 v 25 c 6 16 6 16 ma i cc supply current (four comparators) v o = 2.5 v, no load 25 c 0.8 2 0.8 2 ma ? all characteristics are measured with zero common-mode input voltage, unless otherwise specified. ? full range (min to max) for lm139 and lm139a is ? 55 c to 125 c. all characteristics are measured with zero common-mode input voltage, unless otherwise specified. switching characteristics, v cc = 5 v, t a = 25 c parameter test conditions lm139 lm139a unit min typ max res p onse time r l connected to 5 v through 5.1 k ? , 100-mv input step with 5-mv overdrive 1.3 s response time l g c l = 15 pf , see note 5 ttl-level input step 0.3 s c l includes probe and jig capacitance. note 5: the response time specified is the interval between the input step function and the instant when the output crosses 1.4 v.
lm139, lm139a, lm239, lm239a, lm339, lm339a, lm2901 quad differential comparators slcs006f ? october 1979 ? revised november 2001 5 post office box 655303 ? dallas, texas 75265 electrical characteristics at specified free-air temperature, v cc = 5 v (unless otherwise noted) parameter test conditions ? t a ? lm239 lm339 lm239a lm339a unit a min typ max min typ max v io in p ut offset voltage v cc = 5 v to 30 v, v ic =v icr (min) 25 c 2 5 1 3 mv v io input offset voltage v ic = v icr (min) , v o = 1.4 v full range 9 4 mv i io in p ut offset current v o =14v 25 c 5 50 5 50 na i io input offset current v o = 1 . 4 v full range 150 150 na i ib in p ut bias current v o =14v 25 c ? 25 ? 250 ? 25 ? 250 na i ib input bias current v o = 1 . 4 v full range ? 400 ? 400 na v icr common-mode 25 c 0 to v cc ? 1.5 0 to v cc ? 1.5 v v icr input-voltage range full range 0 to v cc ? 2 0 to v cc ? 2 v a vd large-signal differential-voltage amplification v cc = 15 v, v o = 1.4 v to 11.4 v, r l 15 k ? to v cc 25 c 50 200 50 200 v/mv i oh hi g h-level output v id =1v v oh = 5 v 25 c 0.1 50 0.1 50 na i oh g current v id = 1 v v oh = 30 v full range 1 1 a v ol low-level output v id = 1v i ol =4ma 25 c 150 400 150 400 mv v ol voltage v id = ? 1 v , i ol = 4 ma full range 700 700 mv i ol low-level output current v id = ? 1 v, v ol = 1.5 v 25 c 6 16 6 16 ma i cc supply current v o =25v no load 25 c 08 2 08 2 ma i cc y (four comparators) v o = 2 . 5 v , no load 25 c 0 . 8 2 0 . 8 2 ma ? all characteristics are measured with zero common-mode input voltage, unless otherwise specified. ? full range (min to max) for lm239 and lm239a is ? 25 c to 85 c, for lm339 and lm339a is 0 c to 70 c. all characteristics are measured with zero common-mode input voltage, unless otherwise specified. switching characteristics, v cc = 5 v, t a = 25 c parameter test conditions lm239, lm239a, lm339, lm339a unit min typ max res p onse time r l connected to 5 v through 5.1 k ? , 100-mv input step with 5-mv overdrive 1.3 s response time l g c l = 15 pf , see note 5 ttl-level input step 0.3 s c l includes probe and jig capacitance. note 5: the response time specified is the interval between the input step function and the instant when the output crosses 1.4 v.
lm139, lm139a, lm239, lm239a, lm339, lm339a, lm2901 quad differential comparators slcs006f ? october 1979 ? revised november 2001 6 post office box 655303 ? dallas, texas 75265 electrical characteristics at specified free-air temperature, v cc = 5 v (unless otherwise noted) parameter test conditions ? t ? lm2901 unit parameter test conditions ? t a ? min typ max unit v io in p ut offset voltage v cc = 5 v to 30 v, v ic =v icr (min) 25 c 2 7 mv v io input offset voltage v ic = v icr (min) , v o = 1.4 v full range 15 mv i io in p ut offset current v o =14v 25 c 5 50 na i io input offset current v o = 1 . 4 v full range 200 na i ib in p ut bias current v o =14v 25 c ? 25 ? 250 na i ib input bias current v o = 1 . 4 v full range ? 500 na v icr common-mode input-volta g e 25 c 0 to v cc ? 1.5 v v icr g range full range 0 to v cc ? 2 v a vd large-signal differential-voltage amplification v cc = 15 v, v o = 1.4 v to 11.4 v, r l 15 k ? to v cc 25 c 25 100 v/mv i oh high level out p ut current v id =1v v oh = 5 v 25 c 0.1 50 na i oh high - level output current v id = 1 v v oh = 30 v full range 1 a v ol low level out p ut voltage v id = 1v i ol =4ma 25 c 150 500 mv v ol low - level output voltage v id = ? 1 v , i ol = 4 ma full range 700 mv i ol low-level output current v id = ? 1 v, v ol = 1.5 v 25 c 6 16 ma su pp ly current v o = 2.5 v, no load 0.8 2 i cc supply current (four comparators) v cc = 30 v, no load v o = 2.5 v, 25 c 1 2.5 ma ? all characteristics are measured with zero common-mode input voltage, unless otherwise specified. ? full range (min to max) for lm2901 is ? 40 c to 125 c. all characteristics are measured with zero common-mode input voltage, unless otherwise specified. switching characteristics, v cc = 5 v, t a = 25 c parameter test conditions lm2901 unit parameter test conditions min typ max unit res p onse time r l connected to 5 v through 5.1 k ? , 100-mv input step with 5-mv overdrive 1.3 s response time l g c l = 15 pf , see note 5 ttl-level input step 0.3 s c l includes probe and jig capacitance. note 5: the response time specified is the interval between the input step function and the instant when the output crosses 1.4 v.
important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ti ? s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ti ? s standard warranty. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ti assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ti components. to minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any ti patent right, copyright, mask work right, or other ti intellectual property right relating to any combination, machine, or process in which ti products or services are used. information published by ti regarding third ? party products or services does not constitute a license from ti to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ti is not responsible or liable for such altered documentation. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. mailing address: texas instruments post office box 655303 dallas, texas 75265 copyright ? 2001, texas instruments incorporated
|
