hl01u reve, 12/08 page 1 discontinued l high efficiency l non-conductive case l surface mount package (smd) ordering information device family hl indicates dc/dc converter model number where: xx = input voltage y = number or outputs (single "s", dual "d") zz = output voltage package option screening option dip package only hl01u xxyzz y/z /h absolute maximum ratings internal power dissipation..................................................................30 sec short circuit duration..................................................................momentary lead temperature (soldering, 10 seconds max)..............................+300c * description the hl01u series offers an extensive selection of input and output voltages to choose from. these miniature, unregulated dc/dc converters come in 24-pin dip and smd packages. this small size is possible through the use of surface mount manufacturing technologies. the hl01u series utilizes a 125khz push-pull oscillator in the input stage with internal ?ltering to reduce the output noise. the use of surface mount construction and automated manu- facturing processes increase consistency and reliability while reducing overall cost. * note: refer to re?ow pro?le for smd models. features l low cost l internal filtering l surface mount construction l temperature range: -25c to +70c product data sheet 1 w att u nregulated dc/dc c onverter hl01u
hl01u reve,12/08 page 2 nominal rated rated input current input output output voltage voltage current no load rated load efficiency model (vdc) (vdc) (ma) (ma) (ma) (%) hl01u05s05 5 5 200 30 300 70 hl01u05s12 5 12 83 30 260 74 hl01u05s15 5 15 67 30 260 74 hl01u12s05 12 5 200 25 120 67 hl01u12s12 12 12 83 25 120 70 hl01u12s15 12 15 67 25 120 70 hl01u15s05 15 5 200 20 100 67 hl01u15s12 15 12 83 20 100 70 hl01u15s15 15 15 67 20 100 70 hl01u24s05 24 5 200 15 65 67 hl01u24s12 24 12 83 15 65 70 hl01u24s15 24 15 67 15 65 70 hl01u05d05 5 5 100 30 300 70 hl01u05d12 5 12 41 30 260 74 hl01u05d15 5 15 33 30 260 74 hl01u12d05 12 5 100 25 120 67 HL01U12D12 12 12 41 25 120 70 hl01u12d15 12 15 33 25 120 70 hl01u15d05 15 5 100 20 100 67 hl01u15d12 15 12 41 20 100 70 hl01u15d15 15 15 33 20 100 70 hl01u24d05 24 5 100 15 65 67 hl01u24d12 24 12 41 15 65 70 hl01u24d15 24 15 33 15 65 70 parameter conditions min typ max units input voltage range 4.5 5 5.5 vdc 10.8 12 13.2 13.5 15 16.5 22.6 24 26.4 vdc re?ected ripple current 30 100 map-p isolation rated voltage 500 vdc test voltage 60 hz, 10 seconds 500 vpk resistance 1 g 7 capacitance 25 pf leakage current v iso = 240vac, 60hz 2 arms output rated power 1 w voltage setpoint accuracy 3 5 % temperature coef?cent 0.02 %/c ripple & noise bw = dc to 10mhz 50 100 mvp-p bw =10hz to 2mhz 10 mvrms line regulation high line to low line 1 1.5 %/% load regulation 5 vout models 25% rated load to rated load 5 10 % all others 10% rated load to rated load 3 10 % general switching frequency 125 khz package weight 12 g mttf per mil-hdbk-217, rev. f circuit stress method ground benign t a = +25c 1100 khr t a = +70c 550 khr temperature speci?cation -25 +70 c operation -40 +85 c storage -40 +110 c speci?cations typical at t a = +25c, nominal input voltage, rated output current unless otherwise speci?ed. electrical specifications speci?cations typical at t a = +25c, nominal input voltage, rated output current unless otherwise speci?ed. common specifications
hl01u reve, 12/08 page 3 side views top views end views smd package dip package hl01uxxyzzy hl01uxxyzzz nu = do not use. nc = no internal connection. duplicate pin functions are internally connected. all dimensions are in inches (millimeters). grid: 0.100 inches (2.54 millimeters) typically marked with: speci?c model ordered, date code, job code and logo. recommended land pattern recommended reflow profile mechanical package/pinout "y" and "z" pin connections pin# singles duals 1 +vin +vin 2 nu -vout 3 nu common 10 -vout common 11 +vout +vout 12 -vin -vin 13 -vin -vin 14 +vout +vout 15 -vout common 22 nu common 23 nu -vout 24 +vin +vin
hl01u reve,12/08 page 4 t ypical performance curves safe operating area notes: 1.) when operated within the safe operating area as de?ned by the above curves, the output voltage of hl01u devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steady- state value. 2.) for dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. murata power solutions, inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. the descriptions contained her ein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. speci?cations are subject to chan ge without notice. ? 2008 murata power solutions, inc. usa: mans?eld (ma), tel: (508) 339 3000, email: sales@murata-ps.com canada: toronto, tel: (866) 740 1232, email: toronto@murata-ps.com uk: milton keynes, tel: +44 (0)1908 615232, email: mk@murata-ps.com france: montigny le bretonneux, tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com germany: mnchen, tel: +49 (0)89-544334-0, email: ped.munich@murata-ps.com japan: tokyo, tel: 3-3779-1031, email: sales_tokyo@murata-ps.com osaka, tel: 6-6354-2025, email: sales_osaka@murata-ps.com china: shanghai, tel: +86 215 027 3678, email: shanghai@murata-ps.com guangzhou, tel: +86 208 221 8066, email: guangzhou@murata-ps.com singapore: parkway centre, tel: +65 6348 9096, email: singapore@murata-ps.com murata power solutions, inc. 11 cabot boulevard, mans?eld, ma 02048-1151 u.s.a. tel: (508) 339-3000 (800) 233-2765 fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com iso 9001 & iso 14001 registered
|
