View B133EW01-V4_1360951.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 au optronics corporation b133ew01 v4 product specification document version 0.4 1/36 ( ) preliminary specifications ( v ) final specifications module 13.3? wxga color tft-lcd model name b133ew01 v4 dell part no. xu290 customer date checked & approved by note: this specification is subject to change without notice. approved by date prepared by nbbu marketing division / au optronics corporation www..net
2 au optronics corporation b133ew01 v4 product specification document version 0.4 2/36 contents 1. handling precauti ons ........................................................................................................ ...... 4 2. general descrip tion......................................................................................................... ........ 5 2.1 general s pecificat ion ...................................................................................................... ... 5 2.2 optical char acteristics .................................................................................................... ... 6 3. functional bl ock diag ram.................................................................................................... .11 4. absolute m aximum ra tings.................................................................................................. 12 4.1 absolute ratings of tft lcd m odule.............................................................................. 12 4.2 absolute ratings of backlight unit ................................................................................... 12 4.3 absolute ratings of envir onment ..................................................................................... 12 5. electrical ch aracteristics.................................................................................................. ..... 13 5.1 tft l cd modul e............................................................................................................. .13 5.2 backli ght un it ............................................................................................................. ...... 15 5.3 inverter c harateris tic ..................................................................................................... ... 17 6. signal char acteristic ....................................................................................................... ...... 19 6.1 pixel fo rmat image......................................................................................................... .19 6.2 the input data fo rmat ...................................................................................................... .20 6.3 signal description/ pin assignm ent .................................................................................. 21 6.4 interfac e timi ng ........................................................................................................... .... 23 7. connector descrip tion ....................................................................................................... ... 25 7.1 tft l cd modul e............................................................................................................. .25 7.2 backli ght un it ............................................................................................................. ...... 25 7.3 signal for lam p connecto r ............................................................................................... 25 8. vibration a nd shock test.................................................................................................... .. 26 8.1 vibrat ion te st ............................................................................................................. ...... 26 8.2 shock te st spec: ........................................................................................................... .. 26 9. reliability................................................................................................................. ............... 27 10. mechanical character istics................................................................................................. 28 10.1 lcm outline dimension ................................................................................................. 28 10.2 screw hole depth and center posi tion.......................................................................... 30 11. shipping and p ackage ....................................................................................................... .. 31 11.1 shipping label forma t ................................................................................................... 31 11.2. cart on pack age........................................................................................................... .. 32 11.3 shipping package of palleti zing ...................................................................................... 32 12. appendix: edid descrip tion ............................................................................................... 33
3 au optronics corporation b133ew01 v4 product specification document version 0.4 3/36 record of revision version and date page old description new d escription remark 0.1 2007/02/14 all first edition for customer 0.2 2007/04/30 31 screw hole maximum depth, from side surface =2.5mm screw hole maximum depth, from side surface =2.0mm 0.3 2007/05/17 33 modify edid content 0.4 2007/06/01 33 modify edid content
4 au optronics corporation b133ew01 v4 product specification document version 0.4 4/36 1. handling precautions 1) since front polarizer is easily dam aged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long c ontact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at t he back of the module to any directions. 9) in case if a module has to be put back in to the packing container slot after once it was taken out from the cont ainer, do not press the center of the ccfl reflector edge. instead, press at the far ends of t he cfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module in to an enclosure (notebook pc bezel, for example), do not twist nor bend the tft m odule even momentary. at designing the enclosure, it should be taken into consider ation that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contai ns a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flamm ability grade is used in the lcd module. the lcd module should be supplied by power complied with requirements of limited power source(, iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the ccf l in it is supplied by limited current circuit(iec60950 or ul1950). do not connect the ccfl in hazardous voltage circuit.
5 au optronics corporation b133ew01 v4 product specification document version 0.4 5/36 2. general description b133ew01 v4 is a color active matrix liquid crystal display composed of a tft lcd panel, a driver circuit, and backlight system. the screen format is intended to support the wxga (1280(h) x 800(v)) screen and 262k colors (rgb 6-bits data driver). all i nput signals are lvds interface compatible. inverter of backlight is not included. b133ew01 v4 is designed for a display uni t of notebook style personal computer and industrial machine. 2.1 general specification the following items are characteri stics summary on the table at 25
condition: items unit specifications screen diagonal [mm] 337.8 (13.3 w?) active area [mm] 286.08 (h) x 178.8 (v) pixels h x v 1280x3(rgb) x 800 pixel pitch [mm] 0.2235 x 0.2235 pixel arrangement r.g.b. vertical stripe display mode normally white white luminance (i ccfl =6.0ma) note: i ccfl is lamp current [cd/m 2 ] 220 typ. (5 points average) 200 min. (5 points average) (note1) luminance uniformity 1.25 max. (5 points) contrast ratio 500 typ optical rise time/fall time [msec] 16 typ. nominal input voltage vdd [volt] +3.3 typ. power consumption [watt] 5.2 max.(without inverter) weight [grams] 365 max. ph y sical size [mm] 299.5 max. ( w ) x 195.5 max. ( h ) x 5.5 electrical interface 1 channel lvds surface treatment glare, hardness 3h, reflectance ~4 % support color 262k colors ( rgb 6-bit ) temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance
6 au optronics corporation b133ew01 v4 product specification document version 0.4 6/36 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 (room temperature)
: item unit conditions min. typ. max. note white luminance i ccfl =6.0ma [cd/m 2 ] 5 points average 200 220 - 1, 4, 5. [degree] [degree] horizontal (right) cr = 10 (left) 40 40 45 45 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) 15 30 25 35 - - 8 luminance uniformity 5 points 1.25 1 luminance uniformity 13 points 1.50 2 cr: contrast ratio 300 500 - 6 cross talk % 4 7 [msec] rising - 4 8 [msec] falling - 12 17 response time [msec] rising + falling 16 25 8 red x 0.560 0.580 0.600 red y 0.320 0.340 0.360 green x 0.290 0.310 0.330 green y 0.530 0.550 0.570 blue x 0.135 0.155 0.175 blue y 0.135 0.155 0.175 white x 0.293 0.313 0.333 color / chromaticity coordinates (cie 1931) white y 0.309 0.329 0.349 2,8 note 1: 5 points position (displ ay area : 286.08 (h) x 178.8 (v)mm)
7 au optronics corporation b133ew01 v4 product specification document version 0.4 7/36 1 2 3 4 5 h/4 h/4 h/4 h/4 h w w/4 w/4 w/4 w/4 note 2: 13 points position note 3: the luminance uniformity of 5 and 13 points is defined by dividing the maximum luminance values by the minimum test point luminance ? w13 = maximum brightness of thirteen points minimum brightness of thirteen points maximum brightness of five points ? w5 = minimum brightness of five points
8 au optronics corporation b133ew01 v4 product specification document version 0.4 8/36 note 4: measurement method the lcd module should be stabilized at given temperat ure for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 30 minutes in a stable, windless and dark room. note 5 j definition of average luminance of white (y l ): measure the luminance of gray level 63 at 5 points d y l = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (1). note 6 j definition of contrast ratio: contrast ratio is calculated with the following formula. center of the scr een tft - lcd module 50 cm photo detector lcd panel field=2 contrast ratio ( cr ) = bri g htness on the ?white? state bri g htness on the ?black? state
9 au optronics corporation b133ew01 v4 product specification document version 0.4 9/36 note 7 j definition of cross talk (ct) ct = | y b ? y a | / y a 100 (%) where y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) note 8: definition of response time: the output signals of bm-7 or equivalent are measur ed when the input signals are changed from ?black? to ?white? (falling time) and from ?white? to ?black? (rising time), respectively. the response time interval between the 10% and 90% of amplitudes. refer to figure as below. "black" t r t f "white" "white" 0 % 10 % 90 % 100 % o ptical response
10 au optronics corporation b133ew01 v4 product specification document version 0.4 10/36 note 8. definition of viewing angle viewing angle is the measurement of contrast rati o 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as follows; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface with t he screen rotated about its center to develop the desired measurement viewing angle.
11 au optronics corporation b133ew01 v4 product specification document version 0.4 11/36 3. functional block diagram the following diagram shows the functional blo ck of the 13. 3inches wide color tft/lcd module: tft array/cell vdd lcd controller lcd drive board backlight unit 1280(r/g/b) x 3 x 800 gnd dc-dc converter ref circuit y-driver x-driver rxin0 rxin1 rxin2 rxclkin (4 pairs lvds) lam p connector ( 2 p in ) lcd connector ( 30 p in )
12 au optronics corporation b133ew01 v4 product specification document version 0.4 12/36 4. absolute maximum ratings absolute maximum ratings of the module are as following: 4.1 absolute ratings of tft lcd module item symbol min max unit conditions logic/lcd drive voltage vin -0.3 +4.0 [volt] note 1,2 4.2 absolute ratings of backlight unit item symbol min max unit conditions ccfl current iccfl - 6.5 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating temperature top 0 +50 [ o c] note 3 operation humidity hop 5 95 [%rh] note 3 storage temperature tst -20 +60 [ o c] note 3 storage humidity hst 5 95 [%rh] note 3 note 1: at ta (25 )
note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality performance, please refe r to auo iis(incoming inspection standard). twb=39 c operating range storage range
13 au optronics corporation b133ew01 v4 product specification document version 0.4 13/36 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specificat ions are as follows; symble parameter min typ max units note vdd logic/lcd drive volta g e 3.0 3.3 3.6 [volt] pdd vdd power 1.0 [watt] note 1 idd idd current 200 2500 [ma] note 1 i rush inrush current 1500 [ma] note 2 vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p note 1 : maximum measurement condition j black patterm note 2 j measure condition q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (lcd module input) (high to low) control signal r2 1k r2 1k r1 47k +3.3v 90% 10% vin rising time 0v 3.3v 0.5ms
14 au optronics corporation b133ew01 v4 product specification document version 0.4 14/36 5.1.2 signal electrical characteristics input signals shall be low or hi gh-impedance state when vdd is off. signal electrical characteristics are as follows; parameter condition min max unit vth differential input high threshold (vcm=+1.2v) 100 [mv] vtl differential input low threshold (vcm=+1.2v) -100 [mv] vcm differential input common mode voltage 1.0 1.5 [v] note: lvds differential voltage
15 au optronics corporation b133ew01 v4 product specification document version 0.4 15/36 5.2 backlight unit parameter guideline for ccfl inverter parameter min typ max units condition white luminance 5 points average 200 220 - [cd/m 2 ] (ta = 25 )
ccfl current(i ccfl ) 2.0 6.0 7.0 [ma] rms (ta=25 )
note 2 ccfl frequency(f ccfl ) 45 62 70 [khz] (ta=25 )
note 3,4 ccfl ignition voltage(vs) 1315 [volt] rms (ta= 0 )
note 5 ccfl ignition voltage(vs) 1095 [volt] rms (ta= 25 )
note 5 ccfl voltage (reference) (vccfl) 608 640 672 [volt] rms (ta=25 )
note 6 ccfl power consumption (p ccfl ) - 3.85 4.2 [watt] (ta=25 )
note 6 note 1: typ are auo recommended design points. *1 all of characteristics listed are measured under the condition using the auo test inverter. *2 in case of using an inverter other than listed, it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. *3 in designing an inverter, it is suggested to check safety circuit very carefully. impedance of ccfl, for instance, becomes more than 1 [m ohm] when cfl is damaged. *4 generally, ccfl has some amount of delay time after applying kick-off voltage. it is recommended to keep on applying kick-off voltage for 1 [sec] until discharge. *5 ccfl discharge frequency must be carefully chosen so as not to produce interfering noise stripes on the screen. *6 reducing ccfl current increases ccfl disc harge voltage and generally increases ccfl discharge frequency. so all the parameters of an inverter s hould be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. note 2: it should be employed the inverter which has ?duty dimming?, if iccfl is less than 4ma. note 3: ccfl discharge frequency should be carefully det ermined to avoid interference between inverter and tft lcd. note 4: the frequency range will not affect to lamp life and reliability characteristics.
16 au optronics corporation b133ew01 v4 product specification document version 0.4 16/36 note 5: ccfl inverter should be able to give out a pow er that has a generating capac ity of over 1,430 voltage. lamp units need 1,400 voltage minimum for ignition. note 6: calculator value for reference (i ccfl v ccfl =p ccfl ) note 7: requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp, are following. it shall help increase the lamp lifetime and reduce leakage current. a. the asymmetry rate of the inverter waveform should be less than 10%. b. the distortion rate of the waveform should bewithin 2 10%. * inverter output waveform had better be more similar to ideal sine wave.
17 au optronics corporation b133ew01 v4 product specification document version 0.4 17/36 5.3 inverter charateristic 5.3.1 foxconn inverter (with maxim ic) electrical characteristics : vin= 7.5v~21v no. item symbol condition min. typ. max. unit 1 input voltage inv_src - 7.5 14.0 21.0 v 2 input voltage 5valw - 4.75 - 5.20 v 3 input current iin vin=14.0v, smbus=ffh - 0.38 - a 4 input power pin vin=14.0v, smbus=ffh - 5.2 - w 5 smbus mode brightness adjust smb_dat min. output: 00h max. output: ffh 00 - ff hex. pwm(hz) - - 10 - khz pwm voltage - 3.135 3.30 3.465 v 6 dpst mode (system side pwm input) signal intensity - 00 - ff hex 7 output voltage vout max. output - 640 - vrms iout (min) 1.4 1.7 2.0 marms 8 output current iout (max) ta=25 , after running 30
min. 5.7 6.0 6.30 marms 9 frequency freq max. output 45 55 65 khz 10 output power pout vin=14.0v, smbus=ffh - 3.84 - w 11 burst mode frequency f b 200 210 220 hz 13 open lamp voltage (2) vopen no load 1400 - 1800 vrms 14 striking time ts no load 0.6 - 1.4 sec 15 efficiency vin=7.5v, max. output, load=100k - 80 - % 16 start ?up time - - 0.1 sec
18 au optronics corporation b133ew01 v4 product specification document version 0.4 18/36 5.3.2 sumida inverter (with maxim ic) electrical characteristics: vin= 7.5v~21v
19 au optronics corporation b133ew01 v4 product specification document version 0.4 19/36 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 0 1 1278 1279 1st line 800th line
20 au optronics corporation b133ew01 v4 product specification document version 0.4 20/36 6.2 the input data format signal name description r5 r4 r3 r2 r1 r0 red data 5 (msb) red data 4 red data 3 red data 2 red data 1 red data 0 (lsb) red-pixel data red-pixel data each red pixel's brightness data consists of these 6 bits pixel data. g5 g4 g3 g2 g1 g0 green data 5 (msb) green data 4 green data 3 green data 2 green data 1 green data 0 (lsb) green-pixel data green-pixel data each green pixel's brightness data consists of these 6 bits pixel data. b5 b4 b3 b2 b1 b0 blue data 5 (msb) blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 (lsb) blue-pixel data blue-pixel data each blue pixel's brightness data consists of these 6 bits pixel data. rxclkin data clock the typical frequency is 68.9 mhz.. the signal is used to strobe the pixel data and de signals. all pixel data shall be valid at the falling edge when the de signal is high. de display timing this signal is strobed at the falling edge of rxclkin. when the signal is high, the pixel data shall be valid to be displayed. vs vertical sync the signal is synchronized to rxclkin . hs horizontal sync the signal is synchronized to rxclkin . note: output signals from any system shall be low or high-impedance state when vdd is off.
21 au optronics corporation b133ew01 v4 product specification document version 0.4 21/36 6.3 signal description/pin assignment lvds is a differential signal technology for l cd interface and high speed data transfer device. pin no symbol function 1 gnd ground 2 vdd +3.3v power supply 3 vdd +3.3v power supply 4 v edid +3.3v edid power 5 nc no connection (reserve for auo test) 6 clk edid edid clock input 7 data edid edid data input 8 rxin0- lvds differential data input(r0-r5, g0) 9 rxin0+ lvds differential data input(r0-r5, g0) 10 gnd ground 11 rxin1- lvds differential data input(g1-g5, b0-b1) 12 rxin1+ lvds differential data input(g1-g5, b0-b1) 13 gnd ground 14 rxin2- lvds differential data input(b2-b5, hs, vs, de) 15 rxin2+ lvds differential data input(b2-b5, hs, vs, de) 16 gnd ground 17 rxclkin- lvds differential clock input 18 rxclkin+ lvds differential clock input 19 gnd ground 20 gnd ground 21 nc no connection (reserve for auo test) 22 nc no connection (reserve for auo test) 23 nc no connection (reserve for auo test) 24 nc no connection (reserve for auo test) 25 nc no connection (reserve for auo test) 26 nc no connection (reserve for auo test) 27 nc no connection (reserve for auo test) 28 nc no connection (reserve for auo test) 29 nc no connection (reserve for auo test) 30 nc no connection (reserve for auo test)
22 au optronics corporation b133ew01 v4 product specification document version 0.4 22/36 note1: start from right side note2: input signals shall be low or high-impedance state when vdd is off. 30 1 nc gnd connecto r
23 au optronics corporation b133ew01 v4 product specification document version 0.4 23/36 6.4 interface timing 6.4.1 timing characteristics basically, interface timings should match the 1280x800 /60hz manufacturing guide line timing. parameter symbol min. typ. max. unit frame rate - 50 60 - hz clock frequency 1/ t clock 50 71.1 80 mhz period t v 803 823 832 active t vd - 800 - vertical section blanking t vb 3 23 32 t line period t h 1302 1440 1700 active t hd - 1280 - horizontal section blanking t hb 22 160 420 t clock note : de mode only 6.4.2 timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1
24 au optronics corporation b133ew01 v4 product specification document version 0.4 24/36 6.5 power on/off sequence vdd power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi- z state or low level when vdd is off. power sequence timing value parameter min. typ. max. units t1 0.5 - 10 (ms) t2 0 - 50 (ms) t3 0 - 50 (ms) t4 400 - - (ms) t5 200 - - (ms) t6 200 - - (ms) t7 0 - 10 (ms) t4 t3 t2 t5 valid data t1 10% 90% 10% 90% t6 t7 power supply vdd lvds interface backlight on
25 au optronics corporation b133ew01 v4 product specification document version 0.4 25/36 7. connector description physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module connector name / designation for signal connector manufacturer hrs or compatible type / part number hrs,mdf76kbw-30s-1h or equivalent mating housing/part number mdf76 kbw-30s-1h or equivalent ? locking type connector 7.2 backlight unit physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. connector name / designation for lamp connector manufacturer jst type / part number bhsr-02vs-1 mating type / part number sm02b-bhss-1-tb 7.3 signal for lamp connector pin # cable color signal name 1 red lamp high voltage 2 white lamp low voltage
26 au optronics corporation b133ew01 v4 product specification document version 0.4 26/36 8. vibration and shock test 8.1 vibration test test spec: z test method: non-operation z acceleration: 1.5g , sine wave z frequency: 10 - 500hz random z sweep: 30 minutes each axis (x, y, z) 8.2 shock test spec: test spec: z test method: non-operation z acceleration: 200 g , half sine wave z active time: 2 ms z pulse: x,y,z .one time for each side
27 au optronics corporation b133ew01 v4 product specification document version 0.4 27/36 9. reliability items required condition note temperature humidity bias 40 /90%,300hr
high temperature operation 60 /dry,300hr
low temperature operation 0 ,300hr
on/off test 25 , on/30 sec. off/30sec., 10,000 cycles)
hot storage 60 /35% rh ,250 hours
cold storage -20 /50% rh ,250 hours
thermal shock test -20 /30 min
,60 /30 min 100cycles
hot start test 50 /1 hr min. power on/off per 5 minutes, 5 times
cold start test 0 /1 hr min. power on/off per 5 minutes, 5 times
shock test (non-operating) 200g, 2ms, half-sine wave vibration test (non-operating) sine-wave vibration, 1.5 g zero-to-peak, 10 to 500 hz, 30 mins in each of three mutually perpendicular axes. esd contact : 8kv/ operation air : 15kv / operation note 1 room temperature test 25 , 2000hours, operating with loop pattern
note1: according to en61000-4-2 , esd class b: some performance degradation allowed. no data lost . self-recoverable. no hardware failures. note2: ccfl life time: 10,000 hours minimum under normal module usage. note3: mtbf (excluding the ccfl) : 30,000 hours with a confidence level 90%
28 au optronics corporation b133ew01 v4 product specification document version 0.4 28/36 10. mechanical characteristics 10.1 lcm outline dimension
29 au optronics corporation b133ew01 v4 product specification document version 0.4 29/36 or compatible
30 au optronics corporation b133ew01 v4 product specification document version 0.4 30/36 10.2 screw hole depth and center position screw hole maximum depth, from side surface =2.0 mm (see drawing) screw hole center location, from front surface = 2.8 0.2mm (see drawing) screw torque: maximum 2.1 kgf-cm
31 au optronics corporation b133ew01 v4 product specification document version 0.4 31/36 11. shipping and package 11.1 shipping label format note 1: ic combination inverter control code h/w toshiba/toshiba (gate/source) foxconn 1axxx 1a toshiba/toshiba (gate/source) sumida 3axxx 3a
32 au optronics corporation b133ew01 v4 product specification document version 0.4 32/36 11.2. carton package the outside dimension of carton is 483 mm x378 mm x 310 mm 11.3 shipping package of palletizing bottom cardboard top cardboard stretch film corner angle wooden pallet pet band label
33 au optronics corporation b133ew01 v4 product specification document version 0.4 33/36 12. appendix: edid description byte value (hex) field name and comments (hex) 0 header 00 1 header ff 2 header ff 3 header ff 4 header ff 5 header ff 6 header ff header 7 header 00 8 eisa manufacture code = 3 character id 06 9 eisa manufacture code (compressed ascii) af 0a panel supplier reserved ? product code 24 0b panel supplier reserved ? product code 14 0c lcd module serial no - preferred but optional (?0? if not used) 00 0d lcd module serial no - preferred but optional (?0? if not used) 00 0e lcd module serial no - preferred but optional (?0? if not used) 00 0f lcd module serial no - preferred but optional (?0? if not used) 00 10 week of manufacture 01 11 year of manufacture 11 12 edid structure version # = 1 01 vendor / product edid version 13 edid revision # = 3 03 14 video i/p definition = digital i/p (80h) 80 15 max h image size = 29 cm(rounded to cm) 1d 16 max v image size = 18 cm(rounded to cm) 12 17 display gamma = (gamma 100)-100 = example: ( 2.2100 ) ? 100 = 120 78 display parameters 18 feature support ( no dpms, active off, rgb, timing blk 1) 0a 19 red/green low bit (rxry/gxgy) 87 1a blue/white low bit (bxby/wxwy) f5 1b red x rx = 0.580 94 1c red y ry = 0.340 57 1d green x rx = 0.310 4f 1e green y ry = 0.550 8c 1f blue x rx = 0.155 27 panel color coordinates 20 blue y ry = 0.155 27
34 au optronics corporation b133ew01 v4 product specification document version 0.4 34/36 21 white x rx = 0.313 50 22 white y ry = 0.329 54 23 established timings 1 (00h if not used) 00 24 established timings 2 (00h if not used) 00 establis hed timings 25 manufacturer?s timings (00h if not used) 00 26 standard timing id1 (01h if not used) 01 27 standard timing id1 (01h if not used) 01 28 standard timing id2 (01h if not used) 01 29 standard timing id2 (01h if not used) 01 2a standard timing id3 (01h if not used) 01 2b standard timing id3 (01h if not used) 01 2c standard timing id4 (01h if not used) 01 2d standard timing id4 (01h if not used) 01 2e standard timing id5 (01h if not used) 01 2f standard timing id5 (01h if not used) 01 30 standard timing id6 (01h if not used) 01 31 standard timing id6 (01h if not used) 01 32 standard timing id7 (01h if not used) 01 33 standard timing id7 (01h if not used) 01 34 standard timing id8 (01h if not used) 01 standard timing id 35 standard timing id8 (01h if not used) 01 36 pixel clock/10,000 (lsb) ee 37 pixel clock/10,000 (msb) 1b 38 horizontal active = 1280 pixels (lower 8 bits) 00 39 horizontal blanking (thbp) = 160 pixels (lower 8 bits) a8 3a horizontal active/horizontal blanking (thbp) (upper4:4 bits) 50 3b vertical active = 800 lines 20 3c vertical blanking (tvbp) = 23 lines (de blanking typ. for de only panels) 17 3d vertical active : vertical blanking (tvbp) (upper4:4 bits) 30 3e horizontal sync, offset (thfp) = 48 pixels 30 3f horizontal sync, pulse width = 32 pixels 20 40 vertical sync, offset (tvfp) = 3 lines sync width = 6 lines 36 41 horizontal vertical sync offset/width upper 2 bits 00 42 horizontal image size =286.8 mm 22 timing descripter #1 43 vertical image size = 178.8 mm b4
35 au optronics corporation b133ew01 v4 product specification document version 0.4 35/36 44 horizontal image size / vertical image size 10 45 horizontal border = 0 (zero for notebook lcd) 00 46 vertical border = 0 (zero for notebook lcd) 00 47 non-interlaced, normal, no st ereo, separate sync, h/v pol negatives, de only note: lsb is set to ?1? if panel is de-timing only. h/v can be ignored. 19 48 pixel clock/10,000 (lsb) ee 49 pixel clock/10,000 (msb) 1b 4a horizontal active = xxxx pixels (lower 8 bits) 00 4b horizontal blanking (thbp) = xxxx pixels (lower 8 bits) a8 4c horizontal active/horizontal blanking (thbp) (upper4:4 bits) 50 4d vertical active = xxxx lines 20 4e vertical blanking (tvbp) = xxxx lines (de blanking typ. for de only panels) 17 4f vertical active : vertical blanking (tvbp) (upper4:4 bits) 30 50 horizontal sync, offset (thfp) = xxxx pixels 30 51 horizontal sync, pulse width = xxxx pixels 20 52 vertical sync, offset (tvfp) = xx lines sync width = xx lines 36 53 horizontal vertical sync offset/width upper 2 bits 00 54 horizontal image size =xxx mm 22 55 vertical image size = xxx mm b4 56 horizontal image size / vertical image size 10 57 horizontal border = 0 (zero for notebook lcd) 00 58 vertical border = 0 (zero for notebook lcd) 00 timing descripter #2 59 module ?a? revision = 00 example: 00, 01, 02, 03, etc. 00 5a flag 00 5b flag 00 5c flag 00 5d dummy descriptor fe 5e flag 00 5f dell p/n 1 st character 58 60 dell p/n 2 nd character 55 61 dell p/n 3 rd character 32 timing descripter #3 dell specific information 62 dell p/n 4 th character 39
36 au optronics corporation b133ew01 v4 product specification document version 0.4 36/36 63 dell p/n 5 th character 30 64 lcd supplier eedid revision # 00 65 manufacturer p/n 42 66 manufacturer p/n 31 67 manufacturer p/n 33 68 manufacturer p/n 33 69 manufacturer p/n 45 6a manufacturer p/n 57 6b manufacturer p/n (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 31 6c flag 00 6d flag 00 6e flag 00 6f data type tag: fe 70 flag 00 71 smbus value = 9.82 nits 23 72 smbus value = 17.01 nits 32 73 smbus value = 23.75 nits 3d 74 smbus value = 30.34 nits 46 75 smbus value = 59.76 nits 64 76 smbus value = 99.95 nits 81 77 smbus value = 160.59 nits a7 78 smbus value = 219.49 nits e5 79 number of lvds receiver chips = 01 (01 or 02) 01 7a bist enable: yes 01 7b (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 7c (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 timing descripter #4 7d (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 7e extension flag (# of optional 128 edid extension blocks to follow, typ = 0) 00 checksu m 7f checksum (the 1-byte sum of all 128 bytes in this edid block shall = 0) 4e

▲Up To Search▲

Price & Availability of B133EW01-V4

	To Download B133EW01-V4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .