pd 1.035a series PVG612 microelectronic power ic relay single pole, normally open, 0-60v, 1.0a ac/ 2.0 a dc general description the PVG612 series photovoltaic relay is a single- pole, normally open solid-state relay that can replace electromechanical relays in many applica- tions. it utilizes international rectifiers proprietary hexfet power mosfet as the output switch, driven by an integrated circuit photovoltaic gen- erator of novel construction. the output switch is controlled by radiation from a gaalas light emitting diode (led) which is optically isolated from the photovoltaic generator. these units exceed the performance capabilities of electromechanical relays in operating life, sensitivity, stability of on-resistance, miniaturization, insensitiv- ity to magnetic fields and ruggedess. the compact PVG612 is particularly suited for isolated switching of high currents from 12 to 48 volt ac or dc p ower sources. series PVG612 relays are packaged in a 6-pin, molded dip package with either through-hole or surface mount (gull-wing) ter minals. it is available in standard plastic shipping tubes or on tape-and-reel. please refer to part identification information opposite. PVG612 features hexfet power mosfet output n n n n n bounce-free operation n n n n n high load current capacity n n n n n high off-state resistance n n n n n linear ac/dc operation n n n n n 4,000 v rms i/o isolation n n n n n solid-state reliability n n n n n ul recognized and csa certified n n n n n hexfet ? power mosfet photovoltaic relay applications n programmable logic controllers n computers and peripheral devices n audio equipment n power supplies and power distribution n control of displays and indicators n industrial automation part identification PVG612 through-hole PVG612s surface-mount PVG612s-t surface-mount, tape and reel (hexfet is the registered trademark for international rectifier power mosfets)
series PVG612 ? hexfet ? photovoltaic relay input characteristics limits units minimum control current (see figure 1) 5.0 ma maximum control current for off-state resistance @ t a = +25c 0.4 ma control current range (caution: current limit input led, see figure 6) 5.0 to 25 ma maximum reverse voltage 7.0 v output characteristics limits units operating voltage range 0 to 60 v (dc or ac peak) maximum load current @ t a = +40c, 10ma control (see figure 1) a connection 1.0 a (ac or dc) b connection 1.5 a (dc) c connection 2.0 a (dc) maximum pulsed load current @ t a = +25c (100 ms @ 10% duty cycle) a connection 2.4 a (ac or dc) maximum on-state resistance @t a =+25c for 1a pulsed load, 10ma control (see figure 4) a connection 500 m w b connection 250 m w c connection 150 m w minimum off-state resistance @t a =+25c, 48v (see figure 5) 10 8 w maximum turn-on time @t a =+25c (see figure 7) for 500ma, 50 v dc load, 10ma control 2.0 ms maximum turn-off t ime @t a =+25c (see figure 7) for 500ma, 50 v dc load, 10ma control 0.5 ms maximum output capacitance @ 50v dc (see figure 2) 130 pf general characteristics limits units minimum dielectric strength, input-output 4000 v rms minimum insulation resistance, input-output, @t a =+25c, 50%rh, 100v dc 10 12 w maximum capacitance, input-output 1.0 pf maximum pin soldering temperature (10 seconds maximum) +260 ambient temperature range: operating -40 to +85 c storage -40 to +100 electrical specifications (-40c t a +85c unless otherwise specified ) connection diagrams
series PVG612 ? hexfet ? photovoltaic relay m a x. lo ad current (a ) a m bient te m perature (de g. c) 20 40 60 80 100 0 0.2 5 0.50 0 1.00 1.25 0.75 i led 10 m a 5 m a = 'a' co nnec tion figure 1. current derating curves* figure 2. typical output capacitance typical capacitance (pf) vdd, drain to drain voltage (v) 0 15304560 45 0 30 0 15 0 0 60 0 'a' connection lo ad c urre nt (a ) @25c, pulse d 10 m a co ntrol -0.1 -0.2 -0.3 -0.4 -0.5 0.50 1.25 1.00 0.25 0.7 5 -0 .25 -1 .25 -1 .00 -0 .75 -0 .50 0.5 0.4 0.3 0.2 0.1 c o nne ctio n 'a ' vo lta g e d rop (vd d ) rd-on (normalized to 25 deg. c) a m bient te m perature (de g. c) 2.5 2.0 1.5 1.0 0.5 0 -50 -25 0 25 50 75 100 125 10 m a c ontrol = 500 m a d i 'a ' c onne ctio n a mbient tem perature (de g. c) -35-15 5 2545 6585105 10 0 30 10 3.0 1.0 0.3 0.1 i d-off 25 deg. c / i d-off in p ut c u rre n t (m a ) led forward voltage drop (volts dc) 16 20 12 8 4 0 0.5 1.0 1.5 2.0 0 not exceeded t y p i c a l ca u ti on: pr o vide c ur ren t l i m it in g so that 25 ma maximum steady- st ate cont rol cu rren t rat in g is m i n . d e v i c e a n d + 8 5 d e g . c l i m i t m a x . d e v i c e a n d - 4 0 d e g . c l i m i t figure 3. linearity characteristics figure 4. typical normalized on-resistance figure 5. typical normalized off-state leakage figure 6. input characteristics (current controlled) * derating of b and c connection at +85c will be 70% of that specified at +40c and is linear from +40c to +85c.
series PVG612 ? hexfet ? photovoltaic relay le d current (m a ) de la y tim e (m ic ro se co nd s ) 5 0 1 00 200 500 20 1000 2000 20 10 5 3 t off t dly t on 90% 10% i i led d t dly t on t off figure 7. typical delay times figure 8. delay time definitions case outline dimensions in millimeters (inches) mechanical specifications: 1. dimensioning and tolerancing per ansi y14.5m-1982 2. controlling dimension: inch ? dimension does not include mold protrusions. mold protrusions shall not exceed 0.25 (.010). world headquarters: 233 kansas st., el segundo, california 90245, tel: (310) 322 3331 european headquarters: hurst green, oxted, surrey rh8 9bb, uk tel: ++ 44 1883 713215 ir canada: 7321 victoria park ave., suite 201, markham, ontario l3r 2z8, tel: (905) 475 1897 ir germany: saalburgstrasse 157, 61350 bad homburg tel: ++ 49 6172 96590 ir italy: via liguria 49, 10071 borgaro, torino tel: ++ 39 11 451 0111 ir far east: k&h bldg., 2f, 3-30-4 nishi-ikeburo 3-chome, toshima-ku, tokyo, japan 171 tel: ++ 81 3 3983 0641 ir southeast asia: 315 outram road, #10-02 tan boon liat building, singapore 0316 tel: ++ 65 221 8371 http://www/irf.com/ data and specifications subject to change without notice. 9/96
|
