View M190EN03_1234656.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

specification for auo M190EN03 v1 data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de version february 2005 datasheet.in
2/28 product specification 1 9 .0? s xga color tft - lcd module model name: m1 9 0 en03 v. 1 ( u ) preliminary specifications ( ) final specifications note: this specification is subject to change without notice. data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
3/28 contents 1.0 handling precautions ................................ ......................... 6 2.0 general description ................................ ........................... 7 2.1 display characteristics ................................ ................................ ................................ .................... 7 2.2 optical characteristics ................................ ................................ ................................ ..................... 8 3.0 functional block diagram ................................ ................ 11 4.0 absolute maximum ratings ................................ .............. 12 4.1 tft lcd mod ule ................................ ................................ ................................ ............................ 12 4.2 backlight unit ................................ ................................ ................................ ................................ .. 12 4.3 absolute ratings of environment ................................ ................................ ................................ .. 12 5. 0 electrical characteristics ................................ .................. 13 5.1 tft lcd module ................................ ................................ ................................ ............................ 13 5.1.1 power specification ................................ ................................ ............................ 13 5.1.2 signal electrical characteristics ................................ ................................ ................................ 14 5.2 backlight unit ................................ ................................ ................................ ................................ .. 15 6.0 signal characteristic ................................ ........................ 16 6.1 pixel format image ................................ ................................ ................................ ........................ 16 6.2 the input data format ................................ ................................ ................................ .................... 16 6.3 signal description ................................ ................................ ................................ .......................... 17 6.4.1 timing characteristics ................................ ................................ ......................... 19 6.4.2 timing diagram ................................ ................................ ................................ ... 19 6.5 power on/off sequence ................................ ................................ ................................ ............ 20 7.0 connector & pin assignment ................................ ............ 21 7.1 tft lcd module ................................ ................................ ................................ ............................ 21 7.2 backlight unit ................................ ................................ ................................ ................................ .. 22 7.3 signal for lamp connector ................................ ................................ ................................ ............ 22 8.0 vibration, shock, and drop ................................ .............. 22 8.1 vibration & shock ................................ ................................ ................................ ........................... 22 8.2 drop test ................................ ................................ ................................ ................................ ......... 22 9.0 environment ................................ ................................ .... 23 9.1 temperature and humidity ................................ ................................ ................................ ............. 23 9.1.1 operating conditions ................................ ................................ ........................... 23 9.1.2 shipping conditions ................................ ................................ ............................. 23 9.2 atmospheric pressure ................................ ................................ ................................ .................... 23 9.3thermal shock ................................ ................................ ................................ ................................ . 23 10.0 reliability ................................ ................................ ...... 24 10.1 failure criteria ................................ ................................ ................................ .............................. 24 10.2 failure rate ................................ ................................ ................................ ................................ ... 24 data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
4/28 10.2.1 usage............................................................................................................. 24 10.2.1 component de - rating ........................................................................................ 24 10.3 on/off cycle ...............................................................................................................................24 11.0 safety ............................................................................ 25 11.1 sharp edge requirements ..........................................................................................................25 11.2 materials ........................................................................................................................................25 11.2.1 toxicity .......................................................................................................... 25 11.2.2 flammability ..................................................................................................... 25 11.3 capacitors .....................................................................................................................................25 12.0 other requirement ......................................................... 25 12.1 national test lab requirement...................................................................................................25 12.2 label ..............................................................................................................................................25 13.0 mechanical characteristics............................................. 26 data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
5/28 record of revision version and date page old description new description remark 0.1 200 4 / 05 / 18 all first edition for customer all 0.2 2004/07/08 7 2.1 display characteristics contrast ratio=700:1 (typ) 2.1 display characteristi cs contrast ratio=800:1 (typ) modified 8 2.2 optical chaaracteristics contrast ratio (normal direction) min=400 typ=700 2.2 optical chaaracteristics contrast ratio normal direction min=500 typ=800 modified 12 4.1 tft lcd module logic/lcd drive voltage min=+4.5 4.1 tft lcd module logic/lcd drive voltage min= - 0.3 modified 14 5.1.2 signal electrical characteristics vth/vtl= ? 100mv 5.1.2 signal electrical characteristics vth/vtl = ? 100mv modified 15 5.2 backlight unit ccfl power consumption max=24 5.2 ba cklight unit ccfl power consumption max=23.1 modified data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
6/28 1.0 handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an enclosure (desktop monitor bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
7 /28 2.0 general description this specification applies to the 19.0 inch color tft -lcd module M190EN03. the display supports the sxga (1280(h) x 1 024(v)) screen format and 16.7m colors (rgb 8 -bits data). all input signals are 2 channel lvds interface compatible. this module does not contain an inverter card for backlight. 2.1 display characteristics the following items are characteristics summary on the table under 25 j condition: items unit specifications screen diagonal [mm] 480(19") active area [mm] 376.32 (h) x 301.056 (v) pixels h x v 1280(x3) x 1 024 pixel pitch [mm] 0.2 94 (per one triad) x 0.2 94 pixel arrangement r.g.b. vertical stripe display mode normally black white luminance ( center ) [cd/m 2 ] 250 cd/m 2 @7ma (typ) contr ast ratio 800 : 1 (typ) optical response time [msec] 20ms (typ , on/off) nominal input voltage vdd [volt] +5.0 v power consumption (vdd line + ccfl line) [watt] 30w (typ) (w/o inverter, all white pattern) weight [grams] 2500 ( max ) physical size [mm] 396(w) x 3 24(h) x 17.5 (d) (typ) electrical interface even/odd r/g/b data, 3 sync signal, clock support color 16.7m colors (rgb 8 -bit data ) temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
8/28 lcd module pr-880 / bm5a / bm7 module driving equipment measuring distance 2. 2 optical characteristics the optical characteristics are measured under stable conditions at 25j : item unit conditions min. typ. max. note [degree] [degree] horizontal (right) cr = 10 (left) 75 75 85 85 - - viewing angle [degree] [degree] vertical (up) cr = 10 (down) 75 75 85 85 - - contrast ratio normal direction 500 800 [msec] rising time - 15 25 note 1 [msec] falling time - 5 15 note 1 response time [msec] rising + falling - 20 40 note 1 red x 0.6 11 0.6 41 0.6 71 red y 0.323 0.353 0.383 green x 0.259 0.289 0.319 green y 0. 596 0.626 0.656 blue x 0.112 0.142 0.172 color / chromaticity coordinates (cie) blue y 0.048 0.078 0.108 white x 0.283 0.313 0.343 color coordinates (cie) white white y 0.299 0.329 0.359 white luminance at ccfl 7.0ma (central point) [cd/m 2 ] 200 250 - luminance uniformity [%] 70 75 - note 2 crosstalk (in75hz) [%] 1.5 note 3 flicker db -20 note 4 equipment pattern generator, power supply, digital voltmeter, luminance meter (pr 880, bm-5a , bm 7 ,cs -1000, & ezcontrast* ) aperture 1 x with 100cm vd or 2 x with 50cm v iewing distance test point center ( vesa point 9) environment < 1 lux *? ez contrast is different measurement tool with very close viewing distance. data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
9/28 note 1: definition of response time the output signals of photodetector are measured when t he input signals are changed from ? black? to ? white ? (rising time), and from ?white? to ? black ?(falling time), respectively. the response time is interval between the 10% and 90% of amplitudes. note 2: brightness uniformity of these 9 points is def ined as below 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = 50 % 90 % 90 % 50 % 10 % 10 % 100 90 10 0 % optical response white black white tr f tr r 100 90 10 0 % optical response white black white tr f tr r data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
10/28 note 3: crosstalk is defined as below : unit: percentage of dimension of display area l l a -l a? l / l a x 100%= 1.5% max., l a and l b are brightness at location a and b l l b -l b? l / l b x 100%= 1.5% max., l a? and l b? are brightness at location a? and b? note 4: test paterm: subchecker pattern r g b r g b r g b r g b r g b r g b method: record dbv & dc value with (westar)trd-100 level dc hz) 30 level(at ac log 20 (db) flicker = 0 gray level 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a? b? 184 gray level 184 gray level gray level = l127 gray level = l0 amplitude time dc ac data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
11/28 3.0 functional block diagram the following diagram shows the functional block of the 1 9.0 inches color tft/lcd module: jae fi -xb30sl-hf10 jst bhsr-02vs-1 mating type: mating type: jae fi -x30hl-t ( locked type ) sm02b-bhss-1-tb jae fi -x30s-h ( unlocked type ) x - driver ic 4 ccfl connector dc/dc converter lvds receiver timing controller gamma correction tft -lcd 1280*(3)*1024 pixels y-driver ic g1 g1024 d1 d3840 inverter dc power auo asic lvds + 5 v i/f + x -pcb data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
12/28 4.0 absolute maximum ratings absolute maximum ratings of the module is as following: 4.1 tft lcd module item symbol min max unit conditions logic/lcd drive voltage vin -0.3 +5.5 [volt] note 1,2 4.2 backlight unit item symbol min max unit conditions ccfl current icfl - 7.5 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating humidity hop 8 95 [%rh] note 3 storage temperature tst -20 +60 [ o c] note 3 storage humidity hst 8 95 [%rh] note 3 note 1: with in ta ( 25j ) note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality perfermance, please refer to auo iis(incoming inspection standard). t=65j,h= 29% relative humidity % temperature j -20 0 60 50 95 5 100 0 oper ation range storage range storage range 80 60 40 20 t wb=39j t=40j,h=95% t=60j,h=39% t=50j,h=55% data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
13/28 5.0 electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows; symbol parameter min typ max units condition vdd logic/lcd drive voltage 4.5 5 5.5 [volt] 10% idd vdd current - tbd tbd [ma] vin=5v , all wh ite pattern, +30% , at 75hz irush lcd inrush current - - 7 [a] note pdd vdd power - 8 [watt] vin=5v , all white pattern, +30% , at 75hz vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p vddns allowable logic/lcd drive ripple voltage 100 [mv] p-p note: measurement conditions: +5.0v +12.0v sw vcc r1 47k r2 1k vr1 47k f1 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vin rising time 0v 5. 0v 470 us data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
14/28 5. 1.2 signal electrical characteristics input signals shall be low or hi-z state when vin is off it is recommended to refer the specifications of sn75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - +100 [mv] vicm = 1.2v note vtl differential input low threshold -100 - - [mv] vicm = 1.2v note | vid| input differential voltage 100 400 600 [mv] note vicm differential input common mode voltage +1.0 +1.2 +1.35 [v] vth/vtl = ? 100mv note note: lvds signal waveform vth xvidx vtl vicm vss data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
15/28 5.2 backlight unit paramete r guideline for c cfl inverter symbol parameter min. typ. max. unit condition iscfl ccfl standard current 6.5 7.0 7.5 [ma] rms (ta=25 o c) note 1 ircfl ccfl operation range 3.0 7.0 7.5 [ma] rms (ta=25 o c) fcfl ccfl frequency 40 50 60 [khz] (ta=25 o c) note 2 vicfl (0 o c) ccfl ignition voltage (end of the lamp wire connector) 1810 - - [volt] rms (ta=0 o c) note 3 vicf (25 o c) ccfl ignition voltage (end of the lamp wire connector) 1540 - - [volt] rms (ta=25 o c) note 3 vcfl ccfl operation voltage - 750 @7ma 800 [volt] rms (ta=25 o c) note 4 pcfl ccfl power consumption (for reference) - 21 23.1 [watt] (ta=25 o c) note 5 ltcfl ccfl life time 40,000 50,000 - [hour] (ta=25 o c) note 6 note 1 : ccfl standard current is measured at 25? 2j.. note 2 : ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd note 3 : vicfl means ignition voltage for both ends of the lamp, and ccfl inverter should be able to give out a power that has a generating capacity of over 1810 voltage. lamp units need 1810 voltage minimum for ignition note 4 : ccfl operation voltage is measured at 25? 2j. note 5: the variance of ccfl power consumption is 10% . calculator value for reference (icflvcfl 4=pcfl). note 6: definition of life: brightness becomes 50% or less than the minimum luminance value of ccfl. .the typical life time of ccfl is on the condition at 7.0ma lamp current. data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
16/28 6.0 signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1279 1280 1st line 1024 line 6.2 the input data format note 1 : r/g/b data 7:msb, r/g/b data 0:lsb o = ?first pixel data? e = ?second pixel data? data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
17/28 6. 3 signal description the module using one lvds receiver sn75lvds82(tex as instruments) or compatible. lvds is a differential signal technology for lcd interface and high speed data transfer device. transmitter shall be sn75lvds83(negative edge sampling) or compatible. the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even pixels. pin # signal name description 1 rxo0 - n egative lvds differential data input (odd data) 2 rxo0+ positive lvds differential data input (odd data) 3 rxo1 - negative lvds differential data input (odd data) 4 rxo1+ positive lvds differential data input (odd data) 5 rxo2 - negative lvds differentia l data input (odd data, h - sync,v - sync,dsptmg) 6 rxo2+ positive lvds differential data input (odd data, h - sync,v - sync,dsptmg) 7 gnd power ground 8 rxoc - negative lvds differential clock input (odd clock) 9 rxoc+ positive lvds differential clock input (o dd clock) 10 rxo3 - negative lvds differential data input (odd data) 11 rxo3+ positive lvds differential data input (odd data) 12 rxe0 - negative lvds differential data input (even clock) 13 rxe0+ positive lvds differential data input (even data) 14 gnd power ground 15 rxe1 - positive lvds differential data input (even data) 16 rxe1+ negative lvds differential data input (even data) 17 gnd power ground 18 rxe2 - negative lvds differential data input (even data) 19 rxe2+ positive lvds differential data input (even data) 20 rxec - negative lvds differential clock input (even clock) 21 rxec+ positive lvds differential clock input (even clock) 22 rxe3 - negative lvds differential data input (even data) 23 rxe3+ positive lvds differential data input (even data) 24 gnd power ground 25 nc - 26 nc - 27 nc - 28 power power 29 power power 30 power power data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
18/28 note 1: start from left side note 2: input signals of odd and even clock shall be the same timing. connector 1 30 rxo in 0 - vcc data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
19/28 6.4.1 timing characteristics basically, interface timings described here is not actual input timing of lcd module but output timing of sn75lvds82dgg (texas instruments) or equivalent. note: typical value refer to vesa standard signal item symbol min typ max unit dtclk freq. fdck 50 67.5 70 mhz dtclk cycle tck 14.2 14.8 20 ns +v-sync frame rate 1/tv 56.25 75 77 hz +v-sync cycle tv 13 13.33 17.78 ms +v-sync cycle tv 1035 1066 2047 lines +v-sync active level tva 3 3 lines +v-sync v-back porch tvb 7 38 63 lines +v-sync v-front porch tvf 1 1 lines +dsptmg v-line m - 1024 - lines +h -sync scan rate 1/th - 80.06 - khz +h -sync cycle th 800 844 1023 tck +h -sync active level tha (*1) 4 56 tck +h -sync back porch thb (*1) 4 124 tck +h -sync front porch thf 4 24 tck +dsptmg display pixels n - 640 - tck 6. 4.2 timing diagram 844dot 56 dot 124 dot 24 dot 640 dot h - sync dsptmg 42h 1h 38h 3h 1024h v - sync dsptmg data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
20/28 6.5 power on/off sequence vin power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vin is off. 10% 90% 90% 10% t1 t2 t5 t6 t7 t3 t4 0 v lamp signal vin 10% 0 v 0 v 10% 90% 90% 10% t1 t2 t5 t6 t7 t3 t4 0 v lamp signal vin 10% 0 v 0 v 10% 90% 90% 10% t1 t2 t5 t6 t7 t3 t4 0 v lamp signal vin 10% 0 v 0 v values symbol min typ max unit t1 0 - 10 [ms] t2 0.5 40 50 [ms] t3 300 - - [ms] t4 300 - - [ms] t5 0.5 16 50 [ms] t6 0.5 - 10 [ms] t7 1000 - - [ms] data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
21/28 7.0 connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module connector name / designation interface connector / interface card manufac turer jae or compatible type part number fi - xb30s l-hf10 mating housing part number fi -x30hl-t ( locked type ) fi -x30s -h ( unlocked type ) pin# signal name pin# signal name 1 rxo0- 2 rxo0+ 3 rxo1- 4 rxo1+ 5 rxo2- 6 rxo2+ 7 gnd 8 rxoc- 9 rxoc+ 10 rxo3- 11 rxo3+ 12 rxe0 - 13 rxe0+ 14 gnd 15 rxe1 - 16 rxe1+ 17 gnd 18 rxe2 - 19 rxe2+ 20 rxec - 21 rxec+ 22 rxe3 - 23 rxe3+ 24 gnd 25 nc 26 nc 27 nc 28 power 29 power 30 power data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
22/28 7.2 backlight unit connector name / designation lamp connector / backlight lamp manufacturer jst type part number bh sr-02vs-1 mating type part number sm02b-bhs s-1-tb 7.3 signal for lamp connector connector no. pin no. input color function 1 hot1 pink high voltage cn1 2 cold1 white low voltage 1 hot2 pink high voltage upper cn2 2 cold2 white low voltage 1 hot1 pink high voltage cn3 2 cold1 white low voltage 1 hot2 pink high voltage lower cn4 2 cold2 white low voltage 8.0 vibration, shock, and drop 8.1 vibration & shock vibration test spec: l frequency: 10 - 200hz l sweep: 30 minutes each axis (x, y, z) l acceleration: 1.5g(10~200hz p- p) l test method: acceleration (g) 1.5 frequency (hz) 10~200~10 active time (min) 30 shock test spec: acceleration (g) ?a 50 active time -b 20 ms wave form half -sin times 1 l direction: ? x , ? y, ? z 8. 2 drop test package test: the drop height is 60cm. data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
23/28 9.0 environment the display module will meet the provision of this specification during operating condition or after storage or shipment condition specified below. operat ion at 10% beyond the specified range will not cause physical damage to the unit. 9.1 temperature and humidity 9.1.1 operating conditions the display module operates error free, when operated under the following conditions; temperature 0 0 c to 50 0 c relative humidity 8% to 95% wet bulb temperature 39.0 0 c 9.1.2 shipping conditions the display module operates error free, after the following conditions; temperature -20 0 c to 60 0 c relative humidity 8% to 95% wet bulb temperature 39.0 0 c 9.2 atmospheric pressure the display assembly is capable of being operated without affecting its operations over the pressure range as following specified; pressure note maximum pressure 1040hpa 0m = sea level minimum pressure 674hpa 3048m = 10.000 feet note : non-operation attitude limit of this display module = 30,000 feet. = 9145 m. 9.3 thermal shock the display module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperat ure change consists of varying the temperature from -20 0 c to 60 0 c, and back again. thermal shock cycle -20 0 c for 30min 60 0 c for 30min power is not applied during the test. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before powering on. data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
24/28 10.0 reliability this display module and the packaging of that will comply following standards. 10.1 failure criteria the display assembly will be considered as failing unit when it no longer meets any of the requirements stated in this specification. only as for maximum white luminance, following criteria is applicable. l maximum white luminance shall be 125cd/m 2 or more. 10.2 failure rate the average failure rate of the display module (from first power-on cycle till 1,000 hours later) will not exceed 1.0%. the average failure rate of the display module from 1,000 hours until 16,000 hours will not exceed 0.7% per 1000 hours. 10.2.1 usage the assumed usage for the above criteria is: l 220 power-on hours per month l 500 power on/off cycles per month l maximum brightness setting l operation to be within office environment (25 0 c typical) 10.2.1 component de-rating all the components used in this device will be checked the load condition to meet the failure rate criteria. 10. 3 on/off cycle t he display module will be capable of being operated over the following on/off cycles. on/off value cycles +vin and ccfl power 30,000 10 seconds on / 10 seconds off data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
25/28 11.0 safety 11.1 sharp edge requirements there will be no sharp edges or comers on the display assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible adt toxicologist. 11.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 11.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them from b eing inserted backwards. 12.0 other requirement 12.1 national test lab requirement the display module will satisfy all requirements for compliance to ul 1950, first edition u.s.a. information technology equipment csa c22.2 no.950-m89 canada, informat ion technology equipment eec 950 international, information technology equipment en 60 950 international, information processing equipment (european norm for iec950) 12.2 label the label is on the panel as shown b elow: model no: M190EN03 v1 data modul ag - landsberger str. 322 - 80687 mnchen - tel. 089-56017-0 - fax 089-56017-119 ? www.data-modul.de datasheet.in
26/28 13.0 mechanical characteristics datasheet.in
27/28 datasheet.in
28/28 datasheet.in

▲Up To Search▲

Price & Availability of M190EN03

	To Download M190EN03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .