document number: 30209 for tec hnical questions, contact: ww2bresistors@vishay.com www.vishay.com revision: 11-jan-11 1 wirewound resistors, industrial power, flat (hl) hl, nhl flat vishay dale features ? high temperature silicon coating ? mounting accommodations ideally suited to high density packaging ? self-stacking hardware for horizontal or vertical placement ? withstands high vibrations without loosening ? mounting hardware functions as a heat sink allowing greater heat dissipation and less derating of stacked units ? available in non-inductive styles (type nhl) with aryton-perry winding ? compliant to rohs directive 2002/95/ec standard electrical specifications global model historical model power rating p 25 c w resistance range 5 % resistance range 10 % weight (typical) g hl024 hl-24 30 1.0 to 11k 0.10 to 11k 20.14 nhl024 nhl-24 1.0 to 1.2k 1.0 to 1.2k hl035 hl-35 40 1.0 to 26k 0.10 to 26k 30.07 nhl035 nhl-35 1.0 to 3k 1.0 to 3k hl055 hl-55 55 1.0 to 54k 0.10 to 54k 51.25 nhl055 nhl-55 1.0 to 6.8k 1.0 to 6.8k hl070 hl-70 70 1.0 to 77k 0.10 to 77k 60.48 nhl070 nhl-70 1.0 to 9.4k 1.0 to 9.4k hl095 hl-95 95 1.0 to 99.9k 0.10 to 99.9k 76.51 nhl095 nhl-95 1.0 to12.4k 1.0 to 12.4k technical specifications parameter unit hl, nhl flat resistor characteristics temperature coefficient ppm/c 90 for 0.1 to 0.99 ; 50 for 1 to 9.9 ; 30 for 10 and above dielectric withstanding voltage v ac 1000, from terminal to mounting hardware short time overload - 10 x rated power for 5 s maximum working voltage v ( p x r ) 1/2 insulation resistance 1000 m minimum dry, 100 m minimum after moisture test operating temperature range c - 55 to + 350 global part number information global part numbering example: nhl02409z10r00jj global model terminal designation terminal finish resistance value tolerance packaging code special nhl024 (see standard electrical specifications table above for additional p/ns) 09 16 e = lead (pb)-free z = tin/lead n = nickel r = decimal k = thousand 10r00 = 10.0 1k000 = 1 k j = 5.0 % k = 10.0 % e = lead (pb)-free skin pack j (1) = skin pack (j01) (dash number) (up to 2 digits) from 1 to 99 as applicable note (1) tin/lead for type z, le ad (pb)-free for type n historical part number example: nhl-24-09z 10 5 % j01 nhl-24 09z 10 5 % j01 historical model terminal/finish resistance value tolerance packaging * pb containing terminations are not rohs compliant, exemptions may apply ** please see document vishay material category policy: www.vishay.com/doc?99902 hl0 24 0 9 z 10r00 jj n
www.vishay.com for technical questions, contact: ww2bresistors@vishay.com document number: 30209 2 revision: 11-jan-11 hl, nhl flat vishay dale wirewound resistors, industrial power, flat (hl) dimensions in inches [millimeters] type hl flat style power rating vishay hl flat resistor wattage ratings are based on mounting horizontally to 10" x 10" x 0.04" [254.0 mm x 254.0 mm x 1.02 mm] steel plate in 25 c ambient with no air flow. exclusive bracket design mounting strap fits snugly through resistor core and is bound against unit by two eccentric spacers. the bracket eliminates expensive cement s and improves heat transfer and power handling capabilities. material specifications element: copper-nickel alloy of nickel-chrome alloy, depending on resistance value core: ceramic, steatite coating: special high te mperature silicone standard terminals: model e terminals are tinned steel terminal bands: steel part marking: dale, model, wattage, value, tolerance, date code terminal dimensions terminal finish e finish - 100 % sn coated steel. z finish - 60/40 sn/pb coated steel. n finish - nickel coated steel. finish for terminal style 16 is limited to nickel plated steel (n). nhl non-inductive models of equivalent physical and electrical specifications are available with non-inductive (aryton-perry) winding. they are identified by adding the letter n to the front of the hl type designation (nhl024, for example). for nhl models maximum resistance values are lower, see standard electrical specifications table. derating is required for a mbient temperatures above 25 c per the following graph. derating model dimensions in inches [millimeters] a 0.063 [1.59] b 0.063 [1.59] c 0.031 [0.79] distance between terminals (ref.) terminal designation standard optional hl024 1.250 2.500 2.000 0.718 09z 16n nhl024 [31.75] [63.50] [50.80] [18.24] hl035 2.000 3.250 2.750 1.468 09z 16n nhl035 [50.80] [82.55] [69.85] [37.29] hl055 3.500 4.750 4.250 2.968 09z 16n nhl055 [88.90] [120.65] [107.95] [75.39] hl070 4.750 6.000 5.500 4.218 09z 16n nhl070 [120.65] [152.40] [139.70] [107.14] hl095 6.000 7.250 6.750 5.468 09z 16n nhl095 [152.40] [184.15] [171.45] [138.89] 0.625 [15.88] 0.594 [15.08] 0.196 [4.98] dia. typ. a b c 0.563 0.030 [14.29 0.794] 0.438 0.030 [11.11 0.794] 0.313 [7.94] dia. 1.188 [30.16] max. dimension dimensions in inches [millimeters] style 09 style 16 a 0.188 0.188 [4.76] [4.76] b 0.500 0.563 [12.70] [14.29] c 0.104 0.050 [2.64] [1.27] d 0.020 0.020 [0.51] [0.51] s tyle 16 b d a c b d c a s tyle 09 - 65 - 50 0 50 150 250 350 ambient temperature in c 120 100 80 60 40 20 0 % n i r e w o p d e t a r 25 performance test conditions of test test limits thermal shock rated power applied until thermally stable ,then a minimum of 15 min at - 55 c (2.0 % + 0.05 ) r short time overload 10 x rated power for 5 s (2.0 % + 0.05 ) r dielectric withstanding voltage 1000 v rms , 1 min (0.1 % + 0.05 ) r low temperature storage - 55 c for 24 h (2.0 % + 0.05 ) r high temperature exposure 250 h at + 350 c (2.0 % + 0.05 ) r moisture resistance mil-std-202 method 10 6, 7b not applicable (2.0 % + 0.05 ) r shock, specified pulse mil-std-202 method 213, 100 g 's for 6 ms, 10 shocks (0.2 % + 0.05 ) r vibration, high frequency frequency varied 10 hz to 2000 hz, 20 g peak, 2 directions 6 h each (0.2 % + 0.05 ) r load life 1000 h at rated power, + 25 c, 1.5 h on, 0.5 h off (3.0 % + 0.05 ) r
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
