document number: 57027 for tec hnical questions, contact: sfer@vishay.com www.vishay.com revision: 18-nov-10 see al so application note: www.vishay.com/doc?51001 and www.vishay. com/doc?52029 73 3/8" square (10 mm) single-turn cermet trimmer 63 vishay spectrol the model 63 cermet trimmer is available in several pin configurations for top or side adjustment and with a choice of knob styles for finger setting. quick adjustment is achieved with multi-finger wiper and th e standard resistance range is between 100 and 2 m with a tolerance of 10 %. features ? arrow and graduations for repeatable settings ? ?o? ring seal for solvent and aqueous washing ? rigid board mounting achieved with pins secured in housing ? multi-finger wiper for better contact resistance ? solid end stop ? tests according to cecc 41000 or iec 60393-1 ? compliant to rohs directive 2002/95/ec dimensions in inches (millimeters) 0.02 mm (0.5) 6 3 m 6 3s 6 3 p6 3 x 0.01 (0.25) 0.188 (4.78) min. 0.020 x 0.012 (0.51 x 0. 3 0) 0.190 (4.8 3 ) 0.2 0.010 (5.1 0.25) 0. 3 95 (10.0 3 ) 0.100 (2.54) 0.045 (1.14) 0.100 (2.54) 0.177 (4.5) 0.100 (2.54) 0. 3 75 (9.52) 0. 3 75 (9.52) 0.40 (1.02) 0.100 (2.54) 0.100 (2.54) 0.100 (2.54) 0.01 (0.25) s pectrol t607 (all pin styles) 0.410 (10.41) ? 0. 33 0 (8. 3 8) t640 (pin styles p and m) ? 0.550 (1 3 .97) 0. 3 20 (8.1 3 ) t614 (all pin styles) 0.119 ( 3 .02)
63 vishay spectrol 3/8" square (10 mm) sing le-turn cerm et trimmer www.vishay.com for technical questions, contact: sfer@vishay.com document number: 57027 74 see also application note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 revision: 18-nov-10 electrical specifications effective travel 270 nominal resistance range 100 to 2 m resistance tolerance 10 % en d resistance 2 or 1 % whichever is greater temperature coefficient of resistance (typical) 100 ppm/c power rating 0.5 w at + 70 c derated linearly to 0 w at 125 c maximum voltage not to exceed 250 v circuit d iagram dielectric withstan d voltage 1000 v ac at sea level; 250 v ac at 80 000 ft (24 000 m) insulation resistance (500 v dc ) 1000 m minimum contact resistance variation 1 % or 1 , whichever is greater mechanical specifications mechanical travel 300 50 starting torque 35 mnm max. weight 0.03 oz. (0.85 g) max. resistance element cermet 2 terminal a d justability 0.15 % of rt 3 terminal a d justability 0.05 % of applied voltage terminals pure sn (code e3) environmental specifications temperature range - 55 c to + 125 c climatic category 55/125/21 sealing fully sealed - ip67 performances tests conditions max. (r) change per cecc per iec per mil v ab /v ac 41100 vibration 98 m/s 2 , 10 hz to 500 hz 1 % 2 % (para 2.3.2) test fc (iec 6-2-6) method 204 electrical en d urance 1000 h 3 % - (para 2.5.16) - no equiv. sol d ering - - - (para 2.3.7) test tb (iec 68-2-20) method 208 resistance to heat - 1 % - (para 2.3.7) test b (iec 68-2-20a) method 210 damp heat stea d y state 21 days 3 % - (para 2.1) test c (iec 68-2-3) method 103 mechanical life 200 cycles 3 % - - method 2 - terminal strength 2.2 lbs. (1 kg) min. - - - - marking ? vishay trademark ?model ?resistance value ? tolerance ? date code ? terminal identification a c b c w (2) (3) (1)
63 3/8" square (10 mm) single-turn cermet trimmer vishay spectrol document number: 57027 for tec hnical questions, contact: sfer@vishay.com www.vishay.com revision: 18-nov-10 see al so application note: www.vishay.com/doc?51001 and www.vishay. com/doc?52029 75 packaging ? in box of 200 pieces code b40 (bo200) ?on request : in box of 100 pieces code b30 (bo100) in tube of 50 piec es code t20 (tu50) ordering information (part number) model style ohmic value tolerance packaging code special number m63 p m x s from 100 to 2 m 201 = 200 k k = 10 % b40 = box 200 pieces on request: b30 = box 100 pieces t20 = tube 50 pieces (if applicable) given by vishay for custom design description (for information only) 63 p 200u 10 % t607 bo200 e3 model style value tolerance special packaging lead finish 201 k b4 t 0 3 m p 6 06 7
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
