![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Technologies Inc. www..com OM -10B Fiber Optic Serial Data Modem Applications Computer to computer Computer to printer Computer to encrypter Server to PC links Description The OM-10B modem transmits and receives serial asynchronous and synchronous data over a pair of optical fibers. The interface can be set to EIA530, EIA530A, RS232, or RS485. The modem is data rate transparent from DC to 128K Baud. Data, two clocks, and all hand-shake lines are passed across the link. There are two models of the OM10B, a DCE and a DTE. The OM-10B-DCE connects to Data Terminal Equipment such as a computer. It has an onboard bit rate generator which outputs standard clock frequencies, if a clock is desired for synchronous communication. The OM-10B-DTE connects to Data Communication Equipment such as a modem. Features: * Compact * Programable interface * Data plus two clocks * DC to 128K baud * DCE and DTE version Specifications * * * * * All handshake lines implemented Wide operating temperature (-40C to 75C) EMI/RFI immune Low power consumption 5 year warranty Optical Light source ................................................................................ 850 nm LED M multimode fiber version 1300 nm SLED MM multimode fiber version 1300 nm ELED SM singlemode fiber version Optical connectors ...................................................................... ST Optical sensitivity ........................................................................ >-32 dBm (10-9 BER) Operating distance M version -18dBm launch, 62.5/125 fiber, 3 dB loss/Km .................................................. 5 Km MM version -18dBm launch, 62.5/125 fiber, 1 dB loss/Km .................................................. 14 Km SM version -16dBm launch, 9/125 fiber, .4 dB loss/Km ................................................. 40 Km OM-10B Fiber Optic Serial Data Modem www..com Specifications (continued) Electrical Data rate .................................................................................................... Baud clock (on OM-10B DCE only) ............................................................ (Note that 112K and 128K are above RS232 data rates) Data I/O connector ..................................................................................... Interfaces (switch selectable) ..................................................................... Power source (supplied) ............................................................................ Supply voltage range ................................................................................. Power consumption (6 V supply) ............................................................... General Operating temperature ............................................................................... Humidity (RH) ............................................................................................. MTBF .......................................................................................................... Dimensions ................................................................................................ *Specifications subject to change without notice Transparent up to 128k Baud 1.2K, 2.4K, 4.8K, 9.6K, 19.2K, 56K, 64K, 112K, AND 128K OM-10B-DCE DB25 FEMALE OM-10B-DTE DB25 MALE (terminal block is optional) EIA-530, EIA-530A, RS-232, EIA-485 -2 wire External 6V DC power cube 5-8V < 2 Watts -40C to 75C 10% to 95% >100,000 hrs. 8 *1.6 * 5 cm I/O Interface Switches on the side of the OM-10B are used to select any of the following interfaces: EIA-530, EIA-530A, RS-232, EIA-485 -2 wire. The modems will work with different interfaces at each end. For instance, one end may be configured as EIA-530 and the other as RS-232. The OM-10B-DCE usually connects to another OM-10B-DTE; in this configuration, the modem simulates a straight through cable connection; however an OM-10B-DCE to OM-10B-DCE or OM-10B-DTE to OM-10B-DTE configurations is valid. Two possible configurations are shown below. OM-10B Fiber Optic Serial Data Modem www..com Interconnect Examples EIA-530A DCE to DCE RS-232 DCE to DTE OM -10B Fiber Optic Serial Data Modem www..com Part Numbers OM10B-XX-YY M MM SM 850nm standard version 1300nm multi-mode version 1300nm singlemode version DCE for DCE interface DTE for DTE interface Accessories Mounting Clip (MC-OM10B) This is a machined plastic mounting clip which is used for surface mounting the modem. The clip may be mounted to any flat surface with user provided screws, or double-sided adhesive tape. The modem snaps into the clip. Mounting Panel, non-powered (MP-3) Mounting Panel, powered (MP-3P) The MP-3 mounting panel provides rack mounting for up to six OM-10B modems. The panel is 1RU (1.75") high, 19' wide. It comes complete with all mounting hardware with the exception of the 10-32 screws for attaching the panel to the rack. This panel is also available with a power supply/harness which powers all six modems. The photo on the right shows the powered version; the non-powered version is the same minus the power supply and harness. I/O DCE-DTE The I/O DCE-DTE is a DB25 to terminal block breakout box for the OM-10B modems . Rack Mount Unit For 14 OM-10B MODEMS (RMF-2-10B) The mounting unit provides rack mounting for up to 14 OM10B modems. The panel is 2RU (3.5") high, and fits a 19' wide rack. Two built-in power supplies give redundancy and reliability. The slide rails allow easy access. LUXCOM Technologies Inc. 102 Walgreen Road, Ottawa, Ontario K0A 1L0 Canada Tel.: +1 (613) 831-7777 Fax: +1 (613) 831-7778 email: sales@luxcom.com www.luxcom.com 09/28/07 |
Price & Availability of OM-10B
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |