 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PHOTOCOUPLER PS9151 HIGH NOISE REDUCTION, 15 Mbps CMOS OUTPUT TYPE -NEPOC 5-PIN SOP (SO-5) PHOTOCOUPLER Series- DESCRIPTION The PS9151 is an optically coupled isolator containing a GaAlAs LED on the input side and a CMOS output IC on the output side. This photocoupler is high common mode transient immunity (CMR), a high-speed CMOS output type device designed for high-speed logic interface circuits. FEATURES * High-speed response (15 Mbps) * Operable at high temperature (-40 to +100C) * High common mode transient immunity (CMH, CML = 20 kV/s TYP.) * High isolation voltage (BV = 3 750 Vr.m.s.) * Pulse width distortion (tPHL-tPLH = 3 ns TYP.) * Ordering number of tape product : PS9151-F3: 2 500 pcs/reel * Pb-Free product * Safety standards * UL approved: File No. E72422 * DIN EN60747-5-2 (VDE0884 Part2) approved No.40008902 (Option) 1 2 SHIELD PIN CONNECTION (Top View) 5 4 3 1. Anode 2. Cathode 3. GND 4. VO 5. VDD APPLICATIONS * FA Network * Measurement equipment * PDP Document No. PN10659EJ02V0DS (2nd edition) Date Published August 2008 NS The mark 2007, 2008 PS9151 PACKAGE DIMENSIONS (UNIT: mm) 3.4 5 +0.3 -0.1 4 3 7.00.3 1 2 4.4 2.60.2 0.15 +0.10 -0.05 0.10.1 1.27 0.4 +0.10 -0.05 0.25 M 0.50.3 MARKING EXAMPLE SnBi PLATING Ni/Pd/Au PLATING 9151 N831 No. 1 pin Mark Initial of NEC (Engraved mark) N Type Number Assembly Lot *1 No. 1 pin Mark Initial of NEC (Engraved mark) N 9151 N831 Type Number Assembly Lot *1 N 8 31 N 8 31 Week Assembled Year Assembled (Last 1 Digit) Rank Code Week Assembled Year Assembled (Last 1 Digit) Rank Code *1 Bar : Pb-Free *1 Bar : Pb-Free 2 Data Sheet PN10659EJ02V0DS PS9151 ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS9151 PS9151-F3 PS9151-V PS9151-V-F3 PS9151-A PS9151-F3-A PS9151-V-A PS9151-V-F3-A Pb-Free (SnBi) 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel Packing Style Safety Standard Approval Standard products (UL approved) DIN EN60747-5-2 (VDE0884 Part2) approved (Option) PS9151 PS9151-F3 PS9151-V PS9151-V-F3 PS9151-AX PS9151-F3-AX PS9151-V-AX PS9151-V-F3-AX Pb-Free (Ni/Pd/Au) 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel 20 pcs (Tape 20 pcs cut) Embossed Tape 2 500 pcs/reel Standard products (UL approved) DIN EN60747-5-2 (VDE0884 Part2) approved (Option) Application Part Number PS9151 *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10659EJ02V0DS 3 PS9151 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Forward Current Reverse Voltage Detector *1 Symbol IF VR VDD VO IO BV TA Tstg Ratings 20 5 0 to 5.5 -0.5 to VDD+0.5 2 3 750 -40 to +100 -55 to +125 Unit mA V V V mA Vr.m.s. C C Supply Voltage Output Voltage Output Current Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 Reduced to 0.8 mA/C at TA = 95C or more. *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-5 shorted together. RECOMMENDED OPERATING CONDITIONS (TA = 25C) Parameter Forward Current Supply Voltage Symbol IF VDD MIN. 10 4.5 5.0 TYP. MAX. 16 5.5 Unit mA V 4 Data Sheet PN10659EJ02V0DS PS9151 ELECTRICAL specified) CHARACTERISTICS (TA = -40 to +100C, VDD = 4.5 to 5.5 V, unless otherwise Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Detector High Level Supply Current Low Level Supply Current High Level Output Voltage Low Level Output Voltage Coupled Threshold Input Current Isolation Resistance *2 Symbol VF IR Ct IDDH IDDL VOH VOL IFHL RI-O Conditions IF = 10 mA, TA = 25C VR = 3 V, TA = 25C V = 0 V, f = 1 MHz, TA = 25C IF = 0 mA IF = 10 mA IO = -20 A, IF = 0 mA IO = 20 A, IF = 10 mA VO < 1 V VI-O = 1 kVDC, RH = 40 to 60%, TA = 25C MIN. 1.4 TYP. *1 MAX. 1.8 10 Unit V 1.65 A pF 30 2.5 2 4.0 5.0 0 2.2 10 11 5 5 mA V 0.1 5 mA Isolation Capacitance Propagation Delay Time (H L) *3 CI-O tPHL V = 0 V, f = 1 MHz, TA = 25C IF = 10 mA, VDD = 5 V, CL = 15 pF, CMOS Levels 0.6 35 60 pF ns Propagation Delay Time (L H) *3 tPLH 35 60 Pulse Width Pulse Width Distortion (PWD) *3 PW tPHL-tPLH 100 3 30 Propagation Delay Skew Rise Time Fall Time Common Mode Transient Immunity at High Level Output Common Mode Transient Immunity at Low Level Output *4 *4 tPSK tr tf CMH VDD = 5 V, IF = 0 mA, VCM = 1 kV, VO > 4 V, TA = 25C 15 4 4 20 40 kV/s CML VDD = 5 V, IF = 10 mA, VCM = 1 kV, VO < 1 V, TA = 25C 15 20 *1 Typical values at TA = 25C *2 Because VOL of 2 V or more may be output when LED current input and when output supply, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device. Data Sheet PN10659EJ02V0DS 5 PS9151 *3 Test circuit for propagation delay time Pulse input (IF) (PW = 100 ns, Duty cycle = 50%) IF = 10 mA 50% 1 5 VDD = 5 V 0.1 F VO (Monitor) CL = 15 pF Input Input (Monitor) 47 2 SHIELD 3 Output 2.5 V VOL tPHL tPLH Remark CL includes probe and stray wiring capacitance. *4 Test circuit for common mode transient immunity IF SW 1 5 VDD = 5 V 0.1 F VO (Monitor) CL = 15 pF VCM 90% 10% tr VO (IF = 0 mA) VO (IF = 10 mA) tf 1 kV 0V 2 SHIELD 3 VOH 4V 1V VOL VCM Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. 2. 3. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. By-pass capacitor of more than 0.1 F is used between VDD and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. Avoid storage at a high temperature and high humidity. 6 Data Sheet PN10659EJ02V0DS PS9151 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 30 Maximum Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE 100 Forward Current IF (mA) 25 20 15 10 5 10 TA = +85C +50C +25C 0C -25C 1 0.1 0 25 50 75 95100 125 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Ambient Temperature TA (C) Forward Voltage VF (V) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE 6 High Level Supply Current IDDH (mA) Low Level Supply Current IDDL (mA) Threshold Input Current IFHL (mA) SUPPLY CURRENT vs. AMBIENT TEMPERATURE 5 VDD = 5.5 V 4 5 4 3 2 1 0 -50 VDD = 5.0 V, VO < 1.0 V 3 IDDH (IF = 0 mA) 2 IDDL (IF = 10 mA) 1 -25 0 25 50 75 100 0 -50 -25 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) tPHL, tPLH, tPHL-tPLH vs. AMBIENT TEMPERATURE Propagation Delay Time tPHL, tPLH (ns) Pulse Width Distortion tPHL-tPLH (ns) Propagation Delay Time tPHL, tPLH (ns) Pulse Width Distortion tPHL-tPLH (ns) tPHL, tPLH, tPHL-tPLH vs. FORWARD CURRENT 60 50 40 30 20 10 0 -10 -20 4 6 8 10 12 14 16 tPHL tPLH tPHL-tPLH VDD = 5.0 V 60 50 40 30 IF = 10 mA, VDD = 5.0 V, CL = 15 pF tPLH 20 10 0 -10 -50 -25 0 tPHL tPHL-tPLH 25 50 75 100 Ambient Temperature TA (C) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. Data Sheet PN10659EJ02V0DS 7 PS9151 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.00.05 4.00.1 1.750.1 7.40.1 1.5+0.1 -0 3.45 MAX. 1.550.1 8.00.1 12.00.2 5.50.1 3.90.1 3.00.1 0.30.05 Tape Direction PS9151-F3 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 R 1.0 21.00.8 13.00.2 3302.0 1001.0 13.51.0 17.51.0 Packing: 2 500 pcs/reel 11.9 to 15.4 Outer edge of flange 8 Data Sheet PN10659EJ02V0DS PS9151 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 1.45 5.5 1.27 0.8 Data Sheet PN10659EJ02V0DS 9 PS9151 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) * Flux 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 10 Data Sheet PN10659EJ02V0DS PS9151 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output at startup, the CMOS IC on output side may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10659EJ02V0DS 11 PS9151 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Application classification (DIN EN 60664-1 VDE0110 Part 1) for rated line voltages 300 Vr.m.s. for rated line voltages 600 Vr.m.s. Climatic test class (DIN EN 60664-1 VDE0110) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Clearance distance Creepage distance Comparative tracking index (DIN IEC 112/VDE 0303 Part 1) Material group (DIN EN 60664-1 VDE0110 Part 1) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Ris MIN. 10 9 Symbol Speck Unit IV III 40/85/21 UIORM Upr 707 1 061 Vpeak Vpeak Upr 1 326 Vpeak UTR 6 000 2 >4.2 >4.2 Vpeak mm mm CTI 175 III a Tstg TA -55 to +125 -40 to +85 12 11 C C Ris MIN. Ris MIN. 10 10 Tsi Isi Psi 150 200 300 C mA mW 12 Data Sheet PN10659EJ02V0DS PS9151 * The information in this document is current as of August, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10659EJ02V0DS 13 PS9151 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. |
Price & Availability of PS9151-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |