 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STP20NM50FD STF20NM50D - STB20NM50FD N-CHANNEL 500V - 0.22 - 20A TO-220/TO-220FP/D2PAK FDmeshTM Power MOSFET (with FAST DIODE) TYPE STP20NM50FD STF20NM50D STB20NM50FD s s s s VDSS 500V 500V 500V RDS(on) <0.25 <0.25 <0.25 Rds(on)*Qg 8.36 *nC 8.36 *nC 8.36 *nC ID 20 A 20 A 20 A 3 1 2 1 3 2 s s TYPICAL RDS(on) = 0.22 HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED LOW INPUT CAPACITANCE AND GATE CHARGE LOW GATE INPUT RESISTANCE TIGHT PROCESS CONTROL AND HIGH MANUFACTURING YIELDS TO-220 TO-220FP 3 1 D2PAK DESCRIPTION The FDmeshTM associates all advantages of reduced on-resistance and fast switching with an intrinsic fast-recovery body diode. It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters. INTERNAL SCHEMATIC DIAGRAM s APPLICATIONS ZVS PHASE-SHIFT FULL BRIDGE CONVERTERS FOR SMPS AND WELDING EQUIPMENT ORDERING INFORMATION SALES TYPE STP20NM50FD STF20NM50D STB20NM50FD MARKING P20NM50FD F20NM50D B20NM50FD PACKAGE TO-220 TO-220FP D2PAK PACKAGING TUBE TUBE TAPE & REEL November 2003 1/11 STP20NM50FD - STF20NM50D - STB20NM50FD ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value STP20NM50FD STB20NM50FD VDS VDGR VGS ID ID IDM ( ) PTOT dv/dt (1) VISO Tstg Tj Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) Gate- source Voltage Drain Current (continuous) at TC = 25C Drain Current (continuous) at TC = 100C Drain Current (pulsed) Total Dissipation at TC = 25C Derating Factor Peak Diode Recovery voltage slope Insulation Winthstand Voltage (DC) Storage Temperature Max. Operating Junction Temperature --65 to 150 150 20 14 80 192 1.2 20 2000 500 500 30 20 (*) 14 (*) 80 (*) 45 0.36 STF20NM50D V V V A A A W W/C V/ns V C C Unit ( ) Pulse width limited by safe operating area (1) ISD 20A, di/dt 200 A/s, VDD V(BR)DSS, Tj TJMAX. (*) Limited only by maximum temperature allowed THERMAL DATA TO-220 / D2PAK Rthj-case Rthj-amb Tl Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max Max 0.65 62.5 300 TO-220FP 2.8 C/W C/W C Maximum Lead Temperature For Soldering Purpose AVALANCHE CHARACTERISTICS Symbol IAR EAS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) Single Pulse Avalanche Energy (starting Tj = 25 C, ID = IAR, VDD = 35 V) Max Value 10 700 Unit A mJ ELECTRICAL CHARACTERISTICS (TCASE = 25 C UNLESS OTHERWISE SPECIFIED) ON/OFF Symbol V(BR)DSS IDSS IGSS VGS(th RDS(on) Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Gate Threshold Voltage Static Drain-source On Resistance Test Conditions ID = 250 A, VGS = 0 VDS = Max Rating VDS = Max Rating, TC = 125 C VGS = 30V VDS = VGS, ID = 250 A VGS = 10V, ID = 10A 3 4 0.22 Min. 500 1 10 100 5 0.25 Typ. Max. Unit V A A nA V 2/11 STP20NM50FD - STF20NM50D - STB20NM50FD ELECTRICAL CHARACTERISTICS (CONTINUED) DYNAMIC Symbol gfs (1) Ciss Coss Crss Coss eq. (2) Rg Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Equivalent Output Capacitance Gate Input Resistance Test Conditions VDS > ID(on) x RDS(on)max, ID = 10A VDS = 25V, f = 1 MHz, VGS = 0 Min. Typ. 9 1380 290 40 130 2.8 Max. Unit S pF pF pF pF VGS = 0V, VDS = 0V to 400V f=1 MHz Gate DC Bias=0 Test Signal Level=20mV Open Drain (1) Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. (2) Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. SWITCHING ON Symbol td(on) tr Qg Qgs Qgd Parameter Turn-on Delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions VDD = 250V, ID = 10 A RG = 4.7 VGS = 10V (see test circuit, Figure 3) VDD = 400V, ID = 20A, VGS = 10V Min. Typ. 22 20 38 18 10 53 Max. Unit ns ns nC nC nC SWITCHING OFF Symbol tr(Voff) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions VDD = 400V, ID = 20 A, RG = 4.7, VGS = 10V (see test circuit, Figure 5) Min. Typ. 6 15 30 Max. Unit ns ns ns SOURCE DRAIN DIODE Symbol ISD ISDM (2) VSD (1) trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 20 A, VGS = 0 ISD = 20 A, di/dt = 100A/s, VDD = 60V, Tj = 150C (see test circuit, Figure 5) 245 2 16 Test Conditions Min. Typ. Max. 20 80 1.5 Unit A A V ns C A Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Pulse width limited by safe operating area. 3/11 STP20NM50FD - STF20NM50D - STB20NM50FD Safe Operating Area For TO-220 / IPAK Thermal Impedance For TO-220 / IPAK Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance 4/11 STP20NM50FD - STF20NM50D - STB20NM50FD Gate Charge vs Gate-source Voltage Capacitance Variations Normalized Gate Thereshold Voltage vs Temp. Normalized On Resistance vs Temperature Source-drain Diode Forward Characteristics 5/11 STP20NM50FD - STF20NM50D - STB20NM50FD Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuit For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 6/11 STP20NM50FD - STF20NM50D - STB20NM50FD TO-220 MECHANICAL DATA mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 oP Q 7/11 STP20NM50FD - STF20NM50D - STB20NM50FD TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 D F G1 H F2 L2 L5 E 123 L4 8/11 G STP20NM50FD - STF20NM50D - STB20NM50FD D2PAK MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 9/11 1 STP20NM50FD - STF20NM50D - STB20NM50FD D2PAK FOOTPRINT TUBE SHIPMENT (no suffix)* TAPE AND REEL SHIPMENT (suffix "T4")* REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W 10/11 BASE QTY 1000 mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 * on sales type STP20NM50FD - STF20NM50D - STB20NM50FD Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2003 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com 11/11 |
Price & Availability of STB20NM50FDT4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |