P/N 905160
Qik Start 17
This Adapter Module is a microcontroller development/prototyping tool for use with any PICmicro 17xxx series product. It accommodates many of the IC packages available and provides access to all IC pins through simple connecting terminal blocks. There is a 4 MHz clock, MCLR button and features two buffered RS-232 interface. I2 C or SPI memory can easily be added. Non committed Pots, LED's and Push Buttons are also available. It can be used as a stand alone development tool or in conjunction with the Diversified Engineering microcontroller Design Center ( P/N 905000).
Features
* * * * * * * * (2) RS-232 driver with DB-9 connectors Sockets for two FLASH Memory devices All port pins accessible at wire socket headers VDD, VSS, OSC and MCLR pins are pre-wired On board regulated adjustable (2-5)V) power supply Powered from Design Center, Power Pak or 9V battery Socketed 4 MHz Clock Oscillator and pads for thru-hole Crystal Uncommitted 4 potentiometers, 3 momentary switches, 8 LED's with series resistors
PIC and PICmicro are register trademarks of Microchip Technology Inc., I2C is a trademark of Phillips Corp., SPI is a trademark of Motorola Corp.
283 Indian River Rd., Orange, CT 06477
Tel 203-799-7875 Fax 203-799-7892 Web www.diversifiedenginering.net
The information provided is subject to change, error and omissions. Copyright (c)1999 Diversified Engineering and Manufacturing, Inc. All Rights reserved. SS107
|
