View HEB-BW-RLC-B_345377.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Bussmann(R)
TRON(R) In-Line Fuseholders
Single-Pole for TM 1TM Fuses
HEB Series
Specification Data - Non-Breakaway & Load-Side Breakaway
Conductor Terminals Stranded No. Per Terminal Terminal Type Conductor Data Size Catalog Symbol Load & Line (2) & (3) A B C D E Z
Copper Crimp
Non-Breakaway Holders Catalog Symbol: HEB-AA(1) (2) (3), HEB-AB(2), HEB-AC(2), HEB-AD(2), HEB-AE(2), HEB-AJ, HEB-AK, HEB-AL, HEB-AR, HEB-AY, HEB-BA(2), HEB-BB(2), HEB-BC(2), HEB-BD(2), HEB-CC(2), HEB-DD(2), HEB-JJ, HEB-JK, HEB-JL, HEB-JY, HEB-LL, HEB-NN, HEB-PP(2), HEB-QQ(2), HEB-RR(2), HEB-SS, HEB-TT(2).HEB-ZA. In-Line Fuseholders Single-Pole Water-Resistant Agency Information: (1)UL Recognized, Guide IZLT2, File E14853 (2)CSA Certified, Class 6225-01, File 47235 (3)CE For breakaway holders See Page 2 HEB -- For TM 1TM (midget) fuse. Fuseholder rated 30A, 600V Typical fuse types: BAF, FNM, FNQ, and KTK (-30A).
Aluminum Crimp Copper Set-Screw
#12 to #8 #12 #10 #6 #4 #8 #4 #6 #2 #4 #20 to #18
1 2 2 1 1 2 1 2 1 2 1
Solid * * * * * * -- * -- * *
* * * * * * * * * * *
#12 to #3
1
*
*
J
#12 to #3
2
*
*
K
Solid Copper Terminal for Aluminum Wire Connector #8 to #12 #10 to #4 #8 #6 #6 #4 #3, #4 #2 #1, #2 #1/0 1 1 1 1 1 1 1 1 1 1 * -- -- * -- * -- * -- -- -- S * * -- * -- * -- * * N P Q R T
Ordering Information:
HEB Load Terminal Line Terminal
Also See Table on Page 3 Example: A single-pole, in-line holder for TM 1TM fuses. A single #12 solid copper wire is on the load side. A copper crimp is desired. Two #6 solid copper wire is on the line side. A copper set-screw is desired. 1. Choose HEB- Series. 2. Choose "A" for load side. 3. Choose "K" for line side. Complete Catalog Number: HEB-AK. For Insulating boots See Page 2 -- Insulating boots are not included with non-breakaway parts and must be ordered separately. They come standard with the breakaway series. When boots are utilized, extra heat retention requires that fuses are sized at a minimum of 200% of the RMS load current. Recommended Torque on Coupling Nut: 10-20 in-lb.
Aluminum Set-Screw #12 to #2 1 * * L
#12 to #2
2
*
*
Y
7-16-03
N03082
Form No. HEB Series Page 1 of 3 Data Sheet: 2127
Bussmann(R)
TRON(R) In-Line Fuseholders
Single-Pole for TM 1TM Fuses
Breakaway Holders Breakaway Holders consist of two parts for a complete unit. One part is the Fuseholder, which contains the Load Terminal, and the other part is the Breakaway, which contains the Line Terminal. These can be ordered as a complete unit or as individual parts. Catalog Symbols: Breakaway Unit: (Includes Fuseholder, Breakaway part and Insulating Boots) HEB-AW-RLA, HEB-AW-RLC-A(1) (2) (3), HEB-AW-RLC-B, HEB-AW-RLC-C, HEB-AW-RLC-J, HEB-AW-RYA, HEB-AW-RYC, HEB-BW-RLC-A, HEB-BW-RLC-B, HEB-BW-RYC, HEB-JW-RLC-J, HEB-JW-RYC, HEB-KW-RLC-J, HEB-KW-RYC, HEB-LW-RLA, HEB-LW-RLC-J, HEB-LW-RYA Fuseholder Only: HEB-AW(2), HEB-BW(2), HEB-DW(2), HEB-JW, HEB-LW Breakaway Part: RLC-A, RLC-B, RLC-C, RLC-J, RYC, RLA, RYA Agency Information: (1)UL Recognized, Guide IZLT2, File E14853 (2)CSA Certified, Class 6225-01, File 47235 (3)CE Ordering Information:
HEB Load Terminal W Line Terminal
HEB Series
Specification Data - Line Side Breakaway
Breakaway Receptacles Stranded * * * * * * * Type Single Conductor Two Conductor No. Per Terminal Terminal Type Conductor Data Size Catalog Symbol
Copper Crimp
Solid
#12 to #8 #6 #4
1 1 1
* * *
-RLC-A -RLC-B -RLC-C
Copper Set-Screw
#12 to #2
1
*
-RLC-J
#12 to #2
2
*
-RYC
Aluminum Set-Screw #12 to #2 1 * -RLA
#12 to #2
2
*
-RYA
Solid Breakaway
(Required with Breakaway Receptacle)
W
Example: A single-pole, breakaway, in-line holder for TM 1TM fuses. A single #12 solid copper wire is on the load side. A copper crimp is desired. Two #6 solid copper wire is on the line side. A copper set-screw is desired. 1. Choose HEB- Series. 2. Choose "AW" for load side. 3. Choose "RYC" for line side. Complete Catalog Number: HEB-AW-RYC.
Insulating Boots
Catalog Numbers 2A0660 2A0661
Recommended Torque on Coupling Nut: 10-20 in-lb.
Two Insulating boots come standard with the Breakaway units (ex. HEB-AW-RLC-A). The insulating boots are not included with the Non-Breakaway Holders (ex. HEB-AA) or the individual pieces of the Breakaway parts (ex. HEB-AW, RLC-A). Two insulating boots must be ordered for each holder when ordering them separately. When insulated boots are utilized, extra heat retention requires that fuses are sized at a minimum of 200% of the RMS load current.
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
7-16-03
N03082
Form No. HEB Series Page 2 of 3 Data Sheet: 2127
Bussmann(R)
For HEB Holders Only
Directions:To select complete holder P/N, work from left to right starting with load terminal options and then line terminal options. Then determine breakaway or non-breakaway style.
Load Terminal
Terminal Type No. of Terminal Wire Size Wires per Solid Stranded Wire Wire Type Terminal
Line Terminal
No. of Wire Size Wires per Solid Stranded Wire Terminal Wire
Available P/N's
Non-Breakaway P/N
(Boots not included)
Breakaway P/N
(Boots included)
Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Set-Screw Copper Set-Screw Copper Set-Screw Copper Set-Screw Aluminum Set-Screw Aluminum Crimp Aluminum Crimp Aluminum Crimp Aluminum Crimp Aluminum Crimp
#12 to #8 #12 #12 to #8 #12 #12 to #8 #12 #12 to #8 #12 #12 to #8 #12 #12 to #8 #12 #12 to #8 #12 #12 to #8 #12 #12 to #8 #12 #12 to #8 #12 #6, #4 #10 #6, #4 #10 #6, #4 #10 #6, #4 #10 #4 #8 #2 #6 #20, #18 #12 to #3 #12 to #3 #12 to #3 #12 to #3 #12 to #2 #8 #6 #6 #4 #3, #4 #2 #1, #2 1/0
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y N Y Y Y Y Y Y Y N Y N Y N Y N N Y N
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y N Y N Y Y N Y
Copper Crimp Copper Crimp Copper Crimp (4) Copper Crimp Copper Crimp Copper Set-Screw Copper set-screw Aluminum Set-Screw Aluminum Set-Screw Aluminum Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Crimp Copper Set-Screw Copper Set-Screw Aluminum Set-Screw Aluminum Set-Screw Aluminum Set-Screw Aluminum Crimp Aluminum Crimp Aluminum Crimp Aluminum Crimp Aluminum Crimp
#12 to #8 #12 #6 to #4 #10 #4 #8 #2 #6 2/0 #3 #12 to #3 #12 to #3 #12 to #2 #12 to #2 #1, #2 #12 to #8 #12 #6, #4 #10 #4 #8 #2 #6 #4 #8 #2 #6 #12 to #8 #12 #12 to #3 #12 to #3 #12 to #2 #12 to #2 #12 to #2 #8 #6 #6 #4 #3, #4 #2 #1, #2 1/0
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1
Y Y Y Y N Y N Y N N Y Y Y Y N Y Y Y Y N Y N Y N Y N Y Y Y Y Y Y Y Y N Y N Y N Y N N Y N
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y N Y N Y Y N Y
HEB-AA(1)(2) (3) HEB-AB(2) HEB-AC(2) HEB-AD(2) HEB-AE(2) HEB-AJ HEB-AK HEB-AL HEB-AY HEB-AR HEB-BA(2) HEB-BB(2) HEB-BC(2) HEB-BD(2) HEB-CC(2) HEB-DD(2) HEB-ZA HEB-JJ HEB-JK HEB-JL HEB-JY HEB-LL HEB-NN HEB-PP(2) HEB-QQ(2) HEB-RR(2) HEB-TT(2) HEB-SS
HEB-AW-RLCA(1)(2) (3) HEB-AW-RLC-B HEB-AW-RLC-C(4) N/A N/A HEB-AW-RLC-J HEB-AW-RYC HEB-AW-RLA HEB-AW-RYA N/A HEB-BW-RLC-A HEB-BW-RLC-B N/A N/A N/A N/A N/A HEB-JW-RLC-J HEB-JW-RYC N/A N/A HEB-LW-RLA N/A N/A N/A N/A N/A N/A
SolidTerminal #8 to #12 for aluminum #10 to #14 connector
SolidTerminal #8 to #12 for aluminum connector #10 to #14
(1)UL Recognized, Guide IZLT2, File E14853 (2)CSA Certified, Class 6225-01, File 47235 (3)CE (4)HEB-AW-RLC-C is for (1) #4 Stranded Wire only.
Contact your local Bussmann representative for other possible terminations not listed.
7-16-03
N03082
Form No. HEB Series Page 3 of 3 Data Sheet: 2127

▲Up To Search▲

Price & Availability of HEB-BW-RLC-B

	To Download HEB-BW-RLC-B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .