 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT Product Facts I Excellent signal isolation, stable insertion loss and low VSWR. I Provide repeatable RF performance at frequencies up to the 3 GHz. level (MW3/MW3HP), 4 GHz. level (MW4/MW4HP) & 6 GHz. level (MW6/MW6HP). I Standard versions for applications ranging from wireless communications to precision high-speed test equipment. I High performance (HP) versions for use under more demanding environmental conditions. I Standard or sensitive (S) coils are offered in a range of DC input voltages. I 2 Form C (DPDT) contacts rated low-level to 1 amp. I Extended mechanical life expectancy of 10 million opertions. I Robust, hermetically sealed enclosure. These CII relays provide microwave frequency switching in a hermetically sealed, subminiature package. Both standard and high performance models are offered in 3 GHz., 4 GHz. and 6 GHz. types. Standard models (MW3, MW4 and MW6) perform in temperature ranges from -55C to +85C and withstand 10G vibration and 30G shock. High performance models (MW3HP, MW4HP and MW6HP) offer extended temperature ratings of -65C to +125C while providing 30G's vibration and 100G's shock (75G's for MW3) environmental ratings. All are available with either standard or sensitive DC coils. Nominal coil power is 367-500mW (model dependent) for standard coils and 169-250mW for sensitive coils. Signal isolation is 18dB at 6 GHz. (MW6/MW6HP), 18dB at 4 GHz. (MW4/MW4HP), and 22dB at 3 GHz. (MW3/MW3HP). Insertion loss is 0.38dB for MW6/MW6HP, 0.27dB for MW4/MW4HP, and 0.36dB for MW3/MW3HP. VSWR is a low 1.30:1 @ 6GHz. for MW6/MW6HP, 1.36:1 @ 4GHz. for MW4/MW4HP, and 1.24:1 @ 3GHz. for MW3/MW3HP. (c) 2003 by Tyco Electronics Corporation. All Rights Reserved. CII and TYCO are trademarks. 1 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW3 & MW3HP Models 3 GHz. Switching Electrical Characteristics Contact Arrangement: 2 Form C (DPDT) Contact Resistance: Before life: 100 milliohms, max (measured @ 10mA @ 6VDC.) After life: 200 milliohms, max (measured @ 1A @ 28VDC.) Mechanical Life Expectancy: 10 million operations Coil Voltages: 5, 12, 18 & 26.5VDC (MW3) 5, 6, 9, 12, 18 & 26.5VDC (MW3HP) Coil Power (mw max @25C): MW3 MW3S MW3HP MW3HPS 675 565 673 563 Duty Cycle: Continuous Pick-up Voltage: MW3: Approx 70% of nominal. MW3HP: Approx 50% of nominal. Pick-up Sensitivity (mw max @25C): MW3 MW3S MW3HP MW3HPS 180 90 146 68 Contact Ratings Contact Load 1.0A @ 28VDC 200mA @ 28VDC (300mH)* 30A @ 50mVDC Type Resistive Inductive Low Level Operations (min.) 100,000 100,000 10,000,000 * The inductive rating is only applicable to high performance models (MW3HP and MW3HPS). Coil Data MW3 Models Nominal Coil Voltage (VDC) Standard Coil 5.0 12.0 18.0 26.5 Sensitive Coil 5.0 12.0 100 850 1,600 3,300 3.5 9.0 13.5 18.0 Release V VDC (Max.) @25C 1.4 2.0 3.0 4.0 6.0 8.0 1.4 2.0 3.0 4.0 6.0 8.0 250 169 203 213 Release V VDC (Min.) @25C 0.22 0.28 0.54 0.63 0.91 1.37 0.23 0.28 0.55 0.64 0.92 1.4 7.5 20.0 30.0 40.0 Nominal Coil Power (mw) @25C 500 367 368 369 368 450 250 180 203 169 203 213 Maximum Coil Voltage 5.8 8.0 12.0 16.0 24.0 32.0 7.5 10.0 15.0 20.0 30.0 40.0 5 12 18 26 Coil Designator 50 390 880 1,560 3.6 8.4 13.0 17.0 500 369 368 450 5.8 16.0 24.0 32.0 5 12 18 26 Coil Resistance In Ohms 20% @ 25C Pickup Voltage VDC (Max.) @ 25C Nominal Coil Power (mw) @ 25C Maximum Coil Voltage Coil Designator Operating Characteristics Timing: Operate Time (ms max.) MW3 MW3S MW3HP MW3HPS 4.0 6.0 2.0 4.0 Release Time (ms max.) MW3 MW3S MW3HP MW3HPS 3.0 3.0 1.5 2.0 Bounce Time (ms max.) MW3 MW3S MW3HP MW3HPS - - 1.5 1.5 Dielectric Withstanding Voltage: Between Open Contacts, Between Adjacent Contacts and Between Contacts and Coil: MW3 types: 350Vrms, 60 Hz. MW3HP types: 500Vrms, 60 Hz. Insulation Resistance: 1,000 megohms @ 500VDC. 18.0 26.5 MW3HP (High Performance) Models Nominal Coil Res. Pickup V Coil Voltage in Ohms VDC (Max.) (VDC) 10% @ 25C @25C Standard Coil 5.0 6.0 9.0 12.0 18.0 26.5 Sensitive Coil 5.0 6.0 9.0 12.0 18.0 26.5 100 200 400 850 1,600 3,300 2.6 3.4 4.85 7.0 9.8 14.0 5 6 9 12 18 26 50 98 220 390 880 1,560 2.7 3.5 5.3 7.0 10.5 14.2 5 6 9 12 18 26 Environmental Characteristics Temperature Range: MW3 types: -55C to +85C. MW3HP types: -65C to +125C. Weight: MW3, MW3HP: 0.09 oz. (2.55 g) MW3S, MW3HPS: 0.12 oz. (3.40 g). Vibration Resistance: MW3 types:10 G's, 10-500 Hz. MW3HP types: 30 G's, 10-3,000 Hz Shock Resistance: MW3 types:30 G's, 6 1 ms. MW3HP types: 75 G's, 6 1 ms. 2 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW3 & MW3HP Models 3 GHz. Switching Insertion Loss & VSWR: NO Contacts (dB) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0.5 1.0 VSWR 1.5 2.0 2.5 3.0 INSERTION LOSS Insertion Loss & VSWR: NC Contacts (dB) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0.5 1.0 VSWR 1.5 2.0 2.5 INSERTION LOSS Isolation (dB) 0 VSWR 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 VSWR 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 3.0 -10 -20 ISOLATION -30 -40 -50 0 0.5 1.0 1.5 2.0 2.5 3.0 FREQUENCY (GHz) FREQUENCY (GHz) FREQUENCY (GHz) Test Conditions Test Board: 0.031" double sided copper clad, PTFE based laminate. Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces. Temperature: Room ambient. Signal Strength: 0 dBm. Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical. Enclosures .335 (8.51) DIA MAX .335 (8.51) DIA MAX Header .370 (9.40) DIA MAX .031 .003 (0.79) .035 .010 (0.89) .370 (9.40) DIA MAX .031 .003 GROUND PIN (0.79) (OPTIONAL) .035 .010 (0.89) .275 (6.99) MAX .385 (9.78) MAX 36+ 3 TERMINAL A = .750 MIN (19.05) P = .187.010 (4.75.25) .017 +.002 (0.43) DIA -.001 .370 (9.40) DIA MAX .017 +.002 -.001 .200 DIA (5.08) GROUND PIN (OPTIONAL) 36+ 3 .200 DIA (5.08) Ground Pin Position "G" (0.43) DIA .370 (9.40) DIA MAX Ground Pin Position "E" MW3 / MW3HP Part Numbering System MW3S / MW3HPS For other ground pin configurations consult factory. Header and Terminal Finish: Nickel plated on MW3 & MW3S. Tin-lead plated on MW3HP & MW3HPS. Wiring Diagram G Typical Part Number MW3 S - 5 A Series: MW3 = 3 GHz. switching relay MW3HP = High performance 3 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC 9 = 9VDC 12 = 12VDC 18 = 18VDC 26 = 26.5VDC 6 and 9 volt coil only available on high performance models. Terminal Length: A = 0.750 in (19.05 mm) P = 0.187 0.010 in (4.75 0.25 mm) Ground Pin Position (see header drawings above): G = Opposite locating tab E = Near locating tab. Consult factory for other ground pin configurations. Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Terminal View 3 Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW4 & MW4HP Models 4 GHz. Switching Electrical Characteristics Contact Arrangement: 2 Form C (DPDT) Contact Resistance: Before life: 100 milliohms, max (measured @ 10mA @ 6VDC.) After life: 200 milliohms, max (measured @ 1A @ 28VDC.) Mechanical Life Expectancy: 10 million operations Coil Voltages: 5, 12, 18 & 26.5VDC (MW4) 5, 6, 9, 12, 18 & 26.5VDC (MW4HP) Coil Power (mw max @25C): MW4 MW4S MW4HP MW4HPS 675 565 673 563 Duty Cycle: Continuous Pick-up Voltage: MW4: Approx 70% of nominal. MW4HP: Approx 50% of nominal. Pick-up Sensitivity (mw max @25C): MW4 MW4S MW4HP MW4HPS 180 90 123 68 Contact Ratings Contact Load 1.0A @ 28VDC 200mA @ 28VDC (300mH)* 30A @ 50mVDC Type Resistive Inductive Low Level Operations (min.) 100,000 100,000 10,000,000 * The inductive rating is only applicable to high performance models (MW4HP and MW4HPS). Coil Data MW4 Models Nominal Coil Voltage (VDC) Standard Coil 5.0 12.0 18.0 26.5 Sensitive Coil 5.0 12.0 100 850 1,600 3,300 3.5 9.0 13.5 18.0 Release V VDC (Max.) @25C 1.4 2.0 3.0 4.0 6.0 8.0 1.4 2.0 3.0 4.0 6.0 8.0 250 169 203 213 Release V VDC (Min.) @25C 0.22 0.28 0.54 0.63 0.91 1.37 0.23 0.28 0.55 0.64 0.92 1.4 7.5 20.0 30.0 40.0 Nominal Coil Power (mw) @25C 500 367 368 369 368 450 250 180 203 169 203 213 Maximum Coil Voltage 5.8 8.0 12.0 16.0 24.0 32.0 7.5 10.0 15.0 20.0 30.0 40.0 5 12 18 26 Coil Designator 50 390 880 1,560 3.6 8.4 13.0 17.0 500 369 368 450 5.8 16.0 24.0 32.0 5 12 18 26 Coil Resistance In Ohms 20% @ 25C Pickup Voltage VDC (Max.) @ 25C Nominal Coil Power (mw) @ 25C Maximum Coil Voltage Coil Designator Operating Characteristics Timing: Operate Time (ms max.) MW4 MW4S MW4HP MW4HPS 4.0 6.0 2.0 4.0 Release Time (ms max.) MW4 MW4S MW4HP MW4HPS 3.0 3.0 1.5 2.0 Bounce Time (ms max.) MW4 MW4S MW4HP MW4HPS - - 1.5 1.5 Dielectric Withstanding Voltage: Between Open Contacts, Between Adjacent Contacts and Between Contacts and Coil: MW4 types: 350Vrms, 60 Hz. MW4HP types: 500Vrms, 60 Hz. Insulation Resistance: 1,000 megohms @ 500VDC. 18.0 26.5 MW4HP (High Performance) Models Nominal Coil Res. Pickup V Coil Voltage in Ohms VDC (Max.) (VDC) 10% @ 25C @25C Standard Coil 5.0 6.0 9.0 12.0 18.0 26.5 Sensitive Coil 5.0 6.0 9.0 12.0 18.0 26.5 100 200 400 850 1,600 3,300 2.6 3.4 4.85 7.0 9.8 14.0 5 6 9 12 18 26 50 98 220 390 880 1,560 2.7 3.5 5.3 7.0 10.5 14.2 5 6 9 12 18 26 Environmental Characteristics Temperature Range: MW4 types: -55C to +85C. MW4HP types: -65C to +125C. Weight: MW4, MW4HP: 0.09 oz. (2.55 g) MW4S, MW4HPS: 0.12 oz. (3.40 g). Vibration Resistance: MW4 types:10 G's, 10-500 Hz. MW4HP types: 30 G's, 10-3,000 Hz Shock Resistance: MW4 types:30 G's, 6 1 ms. MW4HP types: 100 G's, 6 1 ms. 4 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW4 & MW4HP Models 4 GHz. Switching Insertion Loss & VSWR: NO Contacts (dB) 0.0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VSWR INSERTION LOSS Insertion Loss & VSWR: NC Contacts (dB) 0.0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VSWR INSERTION LOSS 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 4.0 -50 -40 -30 -20 -10 0 Isolation VSWR VSWR (dB) ISOLATION 1.0 4.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 FREQUENCY (GHz) FREQUENCY (GHz) FREQUENCY (GHz) Test Conditions Test Board: 0.031" double sided copper clad, PTFE based laminate. Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces. Temperature: Room ambient. Signal Strength: 0 dBm. Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical. Enclosures .335 (8.51) SQ MAX .335 (8.51) SQ MAX Header .375 (9.53) SQ MAX .031 .003 (0.79) .035 .010 (0.98) .280 (7.11) MAX .385 (9.78) MAX TERMINAL P = .187.010 (4.75.25) A = .750 MIN (19.05) B = 1.50 MIN (38.10) .017 +.002 (0.43) DIA -.001 .370 (9.40) SQ MAX .017 +.002 (0.43) DIA -.001 .370 (9.40) SQ MAX 36+ 3 .200 DIA (5.08) Header and Terminal Finish: Gold plated MW4 / MW4HP Part Numbering System MW4S / MW4HPS Wiring Diagram Typical Part Number MW4 S - 5 P Series: MW4 = 4 GHz. switching relay MW4HP = High performance 4 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC 9 = 9VDC 12 = 12VDC 18 = 18VDC 26 = 26.5VDC 6 and 9 volt coil only available on high performance models. Terminal Length: A = 0.750 in (19.05 mm) B = 1.50 in (38.105 mm) - only available on high performance models P = 0.187 0.010 in (4.75 0.25 mm) Terminal View 5 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW6 & MW6HP Models 6 GHz. Switching Electrical Characteristics Contact Arrangement: 2 Form C (DPDT) Contact Resistance: Before life: 100 milliohms, max (measured @ 10mA @ 6VDC.) After life: 200 milliohms, max (measured @ 1A @ 28VDC.) Mechanical Life Expectancy: 10 million operations Coil Voltages: 5, 12, 18 & 26.5VDC (MW6) 5, 6, 9, 12, 18 & 26.5VDC (MW6HP) Coil Power (mw max @25C): MW6 MW6S MW6HP MW6HPS 675 565 673 563 Duty Cycle: Continuous Pick-up Voltage: MW6: Approx 70% of nominal. MW6HP: Approx 50% of nominal. Pick-up Sensitivity (mw max @25C): MW6 MW6S MW6HP MW6HPS 180 90 123 68 Contact Ratings Contact Load 1.0A @ 28VDC 200mA @ 28VDC (300mH)* 30A @ 50mVDC Type Resistive Inductive Low Level Operations (min.) 100,000 100,000 10,000,000 * The inductive rating is only applicable to high performance models (MW6HP and MW6HPS). Coil Data MW6 Models Nominal Coil Voltage (VDC) Standard Coil 5.0 12.0 18.0 26.5 Sensitive Coil 5.0 12.0 100 850 1,600 3,300 3.5 9.0 13.5 18.0 Release V VDC (Max.) @25C 1.4 2.0 3.0 4.0 6.0 8.0 1.4 2.0 3.0 4.0 6.0 8.0 250 169 203 213 Release V VDC (Min.) @25C 0.22 0.28 0.54 0.63 0.91 1.37 0.23 0.28 0.55 0.64 0.92 1.4 7.5 20.0 30.0 40.0 Nominal Coil Power (mw) @25C 500 367 368 369 368 450 250 180 203 169 203 213 Maximum Coil Voltage 5.8 8.0 12.0 16.0 24.0 32.0 7.5 10.0 15.0 20.0 30.0 40.0 5 12 18 26 Coil Designator 50 390 880 1,560 3.6 8.4 13.0 17.0 500 369 368 450 5.8 16.0 24.0 32.0 5 12 18 26 Coil Resistance In Ohms 20% @ 25C Pickup Voltage VDC (Max.) @ 25C Nominal Coil Power (mw) @ 25C Maximum Coil Voltage Coil Designator Operating Characteristics Timing: Operate Time (ms max.) MW6 MW6S MW6HP MW6HPS 4.0 6.0 2.0 4.0 Release Time (ms max.) MW6 MW6S MW6HP MW6HPS 3.0 3.0 1.5 2.0 Bounce Time (ms max.) MW6 MW6S MW6HP MW6HPS - - 1.5 1.5 Dielectric Withstanding Voltage: Between Open Contacts, Between Adjacent Contacts and Between Contacts and Coil: MW6 types: 350Vrms, 60 Hz. MW6HP types: 500Vrms, 60 Hz. Insulation Resistance: 1,000 megohms @ 500VDC. 18.0 26.5 MW6HP (High Performance) Models Nominal Coil Res. Pickup V Coil Voltage in Ohms VDC (Max.) (VDC) 10% @ 25C @25C Standard Coil 5.0 6.0 9.0 12.0 18.0 26.5 Sensitive Coil 5.0 6.0 9.0 12.0 18.0 26.5 100 200 400 850 1,600 3,300 2.6 3.4 4.85 7.0 9.8 14.0 5 6 9 12 18 26 50 98 220 390 880 1,560 2.7 3.5 5.3 7.0 10.5 14.2 5 6 9 12 18 26 Environmental Characteristics Temperature Range: MW6 types: -55C to +85C. MW6HP types: -65C to +125C. Weight: MW6, MW6HP: 0.09 oz. (2.55 g) MW6S, MW6HPS: 0.12 oz. (3.40 g). Vibration Resistance: MW6 types:10 G's, 10-500 Hz. MW6HP types: 30 G's, 10-3,000 Hz Shock Resistance: MW6 types:30 G's, 6 1 ms. MW6HP types: 100 G's, 6 1 ms. 6 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW6 & MW6HP Models 6 GHz. Switching Insertion Loss & VSWR: NO Contacts (dB) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 VSWR INSERTION LOSS 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 VSWR INSERTION LOSS Insertion Loss & VSWR: NC Contacts VSWR 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 -50 0 1.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 -40 -30 -20 -10 0 Isolation (dB) VSWR (dB) ISOLATION 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) FREQUENCY (GHz) FREQUENCY (GHz) Test Conditions Test Board: 0.031" double sided copper clad, PTFE based laminate. Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces. Temperature: Room ambient. Signal Strength: 0 dBm. Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical. Enclosures .335 (8.51) SQ MAX .335 (8.51) SQ MAX Header .375 (9.53) SQ MAX .031 .003 (0.79) .035 .010 (0.98) .280 (7.11) MAX .385 (9.78) MAX TERMINAL P = .187.010 (4.75.25) A = .750 MIN (19.05) B = 1.50 MIN (38.10) .017 +.002 -.001 36+ 3 .200 DIA (5.08) (0.43) DIA .370 (9.40) SQ MAX .017 +.002 (0.43) DIA -.001 .370 (9.40) SQ MAX Header and Terminal Finish: Gold plated MW6 / MW6HP Part Numbering System MW6S / MW6HPS Wiring Diagram Typical Part Number MW6 S - 5 P Series: MW6 = 6 GHz. switching relay MW6HP = High performance 6 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC 9 = 9VDC 12 = 12VDC 18 = 18VDC 26 = 26.5VDC 6 and 9 volt coil only available on high performance models. Terminal Length: A = 0.750 in (19.05 mm) B = 1.50 in (38.105 mm) - only available on high performance models P = 0.187 0.010 in (4.75 0.25 mm) Terminal View 7 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2250 Brasil - Sao Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada - Markham Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-240-9396 Fax: +57-1-660-0206 Mexico - Mexico City Phone: +52-55-5-729-0425 Fax: +52-55-5-398-1430 United States - Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 For Latin/South American Countries not shown Phone: +57-1-240-9396 Fax: +57-1-660-0206 Asia/ Pacific Australia - Sydney Phone: +61-2-9840-8200 Fax: +61-2-9899-5649 Product Information Center: (Technical Support) Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 India - Bangalore Phone: +91-80-841-0200 Fax: +91-80-841-0210 Indonesia - Jakarta Phone: +6221-526-7852 Fax: +6221-526-7856 Japan - Kawasaki, Kanagawa Phone: +81-44-844-8079 Fax: +81-44-844-8733 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Raychem Products Phone: +81-44-900-5102 Fax: +81-44-5025-5027 Korea - Seoul Phone: +82-2-3274-0535 Fax: +82-2-3274-0524/0531 Malaysia - Selangor Phone: +60-3-7053055 Fax: +60-3-7053066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines - Makati City Phone: +632-867-8641 Fax: +632-867-8661 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: Fax: Shunde Phone: Fax: Singapore - Singapore Phone: +65-4820-311 Fax: +65-4821-012 Raychem Products Phone: +65-4866-151 Fax: +65-6545-514 Taiwan - Taipei Phone: +886-2-2664-9977 Fax: +886-2-2664-9900 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Vietnam - Ho Chi Minh City Phone: +84-8-8232-546/7 Fax: +84-8-8221-443 +86-21-6485-0602 +86-21-6485-0728 +86-765-775-1368 +86-765-775-2823 Europe/ Middle East/Africa Austria - Vienna Phone: +43-190-560-0 Fax: +43-190-560-1333 Belgium - Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-352 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Czech Republic - Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Denmark - Viby J Phone: +45-70-15-52-00 Fax: +45-86-29-51-33 Egypt - Cairo Phone: +20-2-417-76-47 Fax: +20-2-419-23-34 Estonia - Tallinn Phone: +372-65-05-474 Fax: +372-65-05-470 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France - Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 France Tyco Electronics Export - St Ouen L'Aumone Phone: +33-1-3440-7200 Fax: +33-1-3440-7220 or +33-1-3440-7230 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Germany - Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Germany - Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Germany HTS Division - Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Great Britain - Stanmore Middlesex Phone: +44-181-954-2356 Fax: +44-181-954-6234 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-141 810 8967...69 Fax: +44-141 810 8971 Great Britain - Dorcan, Swindon Raychem Products Phone: +44-1793-528171 Fax: +44-1793-572516 Greece - Athens Phone: +30-1-9370-396/397 Fax: +30-1-9370-655 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Ireland - Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Israel - Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Lithuania - Vilnius Phone: +370-5-21-31-402 Fax: +370-5-21-31-403 Netherlands - 's-Hertogenbosch Phone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway - Nesbru Phone: +47-66-77-88-99 Fax: +47-66-77-88-55 Poland - Warsaw Phone: +48-22-45-76-700 Fax: +48-22-45-76-720 Romania - Bucharest Phone: +40-1-311-3479+3596 Fax: +40-1-312-0574 Russia - Moscow Phone: +7-095-926-55-06...09 Fax: +7-095-926-55-05 Russia - St. Petersburg Phone: +7-812-325-30-83 Fax: +7-812-325-32-88 Scotland - Dundee Madison Cable Products Phone: +44-1382-508080 Fax: +44-1382-505060 Slovakia - Banska Bystrica Phone: +421-48-415-20-11/12 Fax: +421-48-415-20-13 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 South Africa - Port Elizabeth Phone: +27-41-405-4500 Fax: +27-41-486-1314 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey - Istanbul Phone: +90-212-281-8181...3 +90-212-282-5130/5430 Fax: +90-212-281-8184 Ukraine - Kiev Phone: +38-044-238-6908 Fax: +38-044-568-5740 1654542-2.5M-KRG-FP-12-03 Printed in the U.S.A. Tyco Electronics Corporation www.tycoelectronics.com |
Price & Availability of MW4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |